Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 2 2 2 Your wireless home monitor 4 4 4 3 Placement 5 4 Set-up 6 6 6 5 Specifications 8 6 Troubleshooting 9 What's in the box Product overview Connect Monitor to Wi-Fi network Use the monitor EN 1
1 Important • • Safety Caution •• To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. • • • • • • • • • • • • • 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
2 Your wireless home monitor a Camera lens b Microphone c LED light d Magnetic base e DC power connector Please read and understand the accompanied safety sheet before you use this monitor. f Reset key To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome.
3 Placement You can place the Monitor on a flat surface with the magnetic base. Or you can attach it to the ceiling or wall, see the pictures below: Note •• Before you place the monitor, make sure the monitor is close to a power outlet. •• Before you secure the supplied dowels and screws, drill holes on a flat and hard surface. Mount on wall Mount on ceiling If you install on a ceiling, select ‘Image Flip (Image Flip)’ in the ‘Settings ( )’ options of your monitor.
4 Set-up Connect Monitor to Wi-Fi network You can see and hear what is happening in your room from anywhere in the world with a smartphone. What you need 1 2 Have your Wi-Fi network name (SSID) and Wi-Fi network password available as you need to fill these in. You can look up your Wi-Fi network name in the settings of your phone or tablet. 3 Download ‘Philips In.Sight’ App from Apple App Store. 4 Connect the monitor to power. When power is connected, wait till the Monitor light flashes Amber.
Use the monitor After set-up, you are ready to use the monitor. Launch the Philips In.Sight App on your smartphone or tablet. You can use the monitor when it is connected to your own Wi-Fi network or any other Wi-Fi network. If there is no Wi-Fi network available, it will work over 3G. Please note that 3G data charges can occur. After log-in, you see thumbnail overview of the monitor(s). Tap the thumbnail for full screen viewing. Application Overview : Monitor Connection status.
Share your monitor Share the monitor’s video to your family, friends or colleagues. 1) Tap from the monitor overview page (you can also enable this in the settings part). 2) Make sure on your friend’s smartphone or tablet, the Philips In.Sight App is installed and that an Philips In.Sight Account is created. 3) Fill in the email address of your friend you want to share the monitor with. The email address of your friend must be the same email address used to create the Philips In.Sight Account.
6 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the monitor. To keep the warranty valid, never try to repair the monitor yourself. If you have problems using this monitor, check the following points before you request service. If you still have a problem, register your monitor and get support at www.philips.com/support. Cannot connect the monitor to a Wi-Fi network (the monitor light is blinking amber or green).
• session, in-app upgrades are available. Go to ‘Settings ( )’ – ‘General (General)’ and select ‘In.Sight Account (In.Sight Account)’. When you are on your local Wi-Fi network, you have unlimited viewing time. I can only share to 2 friends, how can I share to more friends? • When you want to share to more than 2 friends, in-app upgrades are available. Go to ‘Settings( )’ – ‘General (General)’ and select ‘In.Sight Account (In.Sight Account)’.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. M100D_12_UM_V4.