Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Safety 3 3 Compliance 3 Care of the environment 4 Notice 5 Written Offer 5 2 Your new monitor 6 Overview 6 Mount on a wall 7 3 Setup 8 Set up your monitor 8 Manage your monitors 10 Add a monitor 10 Share a monitor 11 Delete a monitor 12 Rename a monitor 13 Change to another account 13 Log out of current account 13 Reset 14 4 Use 16 Check network connection 16 EN 1
Watch live video 17 Use the InSightHD app 17 Use the Web browser 20 Set notifications 20 View events 21 View notifications through subscription 5 Check for updates Check for firmware updates of the monitor Upgrade the monitor online Check for updates of the app 6 Specifications 23 24 24 24 25 26 General information 26 Lens 26 Sensors 26 Video 27 Audio 27 7 Warranty 28 2 EN
1 Important safety instructions Safety Only use attachments/accessories specified by the manufacturer. Use only power supplies listed in the user manual. The product shall not be exposed to dripping or splashing. Do not place any sources of danger on the product (e.g. liquid filled objects, lighted candles). In the product, the Wi-Fi connectivity can be interrupted by electromagnetic or other interferences.
This product complies with the requirement of the 1999/5/EC directive. Note •• The type plate is located on the bottom of the product. Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips.com. Care of the environment Environmental information All unnecessary packaging has been omitted.
Notice Disclaimer • If you are on a remote Wi-Fi network or 3G connection, 10 seconds to 15 seconds delay in video and audio streaming to your smartphone can occur. Your use of Philips InSightHD, which is provided by iVideon Inc., is at your sole risk. Gibson Innovations and its subsidiary companies (individually and collectively “Gibson Innovations”) are not responsible for the operation of such Philips InSightHD or your use thereof and Gibson Innovations shall have no liability to you related thereto.
2 Your new monitor Overview b c a d g e f a USB connector • for connection with the supplied AC/DC power adapter through a USB cable b Light sensor c IR LED d Camera lens e Microphone f Status LED g RESET • Press the hole by using the tip of a paper clip.
Mount on a wall 1 2 3 4 5 EN 7
3 Setup Set up your monitor With the Philips InSightHD app, you can watch and listen to your home through your mobile device. 1 2 Place the monitor as close to your wireless router as possible to ensure the best connection. Download and install the Philips InSightHD app. a Create your account. b Follow the onscreen instructions to complete the setup.
Philips InSightHD + Create account iOS Android Hold your mobile device steadily during the scanning of QR code.
Slow flashing amber Quick flashing green Solid green Ready for setup through Wi-Fi and QR code QR code received by the Philips InSightHD app Successful connection through the Philips InSightHD app »» After successful connection, you register the monitor under your account in the Philips InSightHD app. Manage your monitors In the Philips InSightHD app. you can add or remove monitors to/ from your account, and share the monitors to your family or friends.
Note •• Make sure that your monitor is supported by the Philips InSightHD app Share a monitor 1 2 3 4 Go to the play screen (see 'Use the InSightHD app' on page 17). Tap / to select . Tap Add. Follow the onscreen instructions to enter an Email. »» An invitation is sent to the recipient. »» To become a user, the recipient needs to create an account by following the onscreen instructions. Stop sharing the monitor Remove a user to stop sharing the monitor to the user.
Delete a monitor • Go to the play screen (see 'Use the InSightHD app' on page 17). Tap to select . Tip •• Delete the monitor from your account when you change to another account.
Rename a monitor • Go to the play screen (see 'Use the InSightHD app' on page 17). Tap to select . / Change to another account 1 2 3 Delete your monitors from current account (see 'Delete a monitor' on page 12). On your mobile device, launch the Philips InSightHD app. Log in to the new account. Add your monitors (see 'Add a monitor' on page 10). Log out of current account To log in to another account, do the following to log out of current account: • On the Home screen, tap to select .
Reset Reset Wi-Fi connection when: • there are Wi-Fi connection problems with the monitor. Indicator Slow flashing amber • Status of the monitor Local Wi-Fi connection lost By using the tip of a paper clip, briefly press the RESET hole and, then release. »» The status indicator turns solid amber. »» When the status indicator flashes in amber slowly, follow the onscreen setup steps. »» When the status indicator turns solid green, the connection is complete successfully.
EN 15
4 Use Check network connection After successful connection through the Philips InSightHD app, the monitor allows you to watch or listen to your home on your mobile device through local Wi-Fi network, and through mobile network remotely. • On the monitor, make sure that the status indicator is in solid green.
Status indicator Problems Solution • Slow flashing green Problems with the connection to the Internet Check the Internet connection of of the network that your monitor is connected to. On your mobile device, check the network connection through the online/ offline detection of the Philips InSightHD app. If the monitor is displayed as offline on your mobile device, check the Internet connection of the network that your mobile device is connected to.
»» You go to the play screen. 2 On the play screen of live video, tap on the video to pause and resume video play. Living room (local) 9:07:22 am (Live) Add cloud recording 3 18 On the screens, tap the icons to select options: : Add more monitors to your current account in the Philips InSightHD app. : Go to the options menu. / : Select setting options for current monitor. : Check notifications.
: Take snapshots of current scene. Select video quality Select video quality to improve the video streaming performance in poor network environment. 1 2 On the Home screen, tap . Select > . • Auto: The monitor determines the best setting for video streaming. • Low/Medium/High: Select the video quality according to current Internet connection.
Use the Web browser Go to http://insight.ivideon.com to watch live video. Log in to your account under Philips InSightHD. Set notifications Motion and sound notifications keep you informed of changes at home. Select the sensitivity level as needed. 1 2 3 To set notifications, make sure that the monitor is online (see 'Check network connection' on page 16). »» When the monitor is online, you can select options for notifications. On the play screen, tap Tap or detection: / .
c For motion detection, drag the corners of the frame to select the area of detection. View events • • For events that are triggered by motion or sound detection, you can receive push notifications on your mobile device by setting notifications; or check the list of events on your mobile device by doing the following: On the Home screen, tap > .
»» You can check the list of events on all the monitors. Alternatively, tap on the play screen. »» You can check the list of events on current monitor.
View notifications through subscription By subscribing services, you can record videos to the cloud storage for the events that have been triggered by motion or sound detection. 1 On the play screen, tap 2 Select a subscription option as needed. / to select .
5 Check for updates Check for firmware updates of the monitor • Go to the play screen (see 'Use the InSightHD app' on page 17). Tap > . / Upgrade the monitor online 1 2 24 Connect your mobile device to a Wi-Fi network. Go to the play screen (see 'Use the InSightHD app' on page 17). Tap > .
3 Follow the onscreen instructions to complete the upgrading. Check for updates of the app For updates of the Philips InSightHD app, you can receive messages on your mobile device. Follow the onscreen instructions to complete the updating.
6 Specifications General information • • • AC power adapter Model: HNB050150X (X = E, B, A, C, U, J, K, and C) a direct plug-in power adapter with USB output terminal and a different country plug type (E = EU plug, B = UK plug, A = Australia plug, U = USA plug, J = Japanese plug, K= Korean plug, C = China plug) Input: AC 100-240 V~ 50/60 Hz, 0.35 A MAX Output: 5 V DC, 1.5 A Connectivity Wi-Fi 802.11 b/g/n, 2.
• IR LED IR range: 4 meters Video • • Resolution Streaming through Wi-Fi: 720p (High definition) Video format H. 264 Audio • • Input High-sensitive mono microphone Output power: 0.
7 Warranty To get the warranty information about your product, go to www.philips.com/ support.
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. M120E_M120G_10_UM_V1.0_1521.
