User's Manual

Getting Acquainted

M3500B HeartStart XLT Defibrillator/Monitor 2-3

- Powers on the HeartStart XLT.

- Powers off the HeartStart XLT.

Defibrillation Controls - softkeys that perform the defibrillation function

displayed in the softkey label above each button; control both AED and Man-

ual Mode defibrillation.

Manual Mode Controls - provide access to Manual Mode and control of syn-

chronized cardioversion and pacing (if the option is present).

Audiovisual Controls:

Adjusts the display contrast.

Adjusts the size of the ECG waveform displayed, printed, and stored.

Pressing and simultaneously generates a 1 mV calibration pulse.

Adjusts the volume of voice prompts and the QRS beeper.

Monitoring Controls - softkeys that perform the monitoring function dis-

played in the softkey label below each button; control heart rate and SpO

alarms and select the ECG source to monitor.

Print Controls - perform the function shown above each button. The print

controls from left to right are:

Strip

Prints ECG data, defibrillation events, and marked events real-

time or with a 6 second delay (as configured). Press to start print-

ing; press again to stop printing.

Summary

Prints the Event Summary. (See “Storing, Retrieving & Printing”

for more information.) Printing may be stopped by pressing the

or button.

Mark

Event

Inserts a time-stamped annotation in the Event Summary. May be

configured to print an annotated ECG strip when pressed.

Summary

Strip