Register your product and get support at www.philips.
English Contents 1 Important Safety and important notice Trademark notice 2 Your Blu-ray Micro System Feature highlights Playable media Product overview 4 4 5 6 6 7 8 6 Adjust settings 26 26 27 28 29 30 31 Video setup Audio setup Network setup EasyLink setup Preference setup Advanced setup 7 Tune to FM radio stations 3 Connect Preparations Connect speakers Connect video/audio cables Route audio to other devices Connect FM antenna Connect a USB device Connect a network Connect power 4 Get started Pre
1 Important Safety and important notice Warning • Risk of overheating! Never install the product • • • • • • in a confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Never place the product, remote control or batteries near naked flames or other heat sources, including direct sunlight. Only use this product indoors. Keep this product away from water, moisture and liquidfilled objects.
To establish a safe volume level: • Set your volume control at a low setting. • Slowly increase the sound until you can hear it comfortably and clearly, without distortion. Listen for reasonable periods of time: • Prolonged exposure to sound, even at normally ‘safe’ levels, can also cause hearing loss. • Be sure to use your equipment reasonably and take appropriate breaks. This offer is valid up to three years after product purchase to anyone in receipt of this information.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
English Playable media This product can play: • BD-Video, BD-R/RE2.0 • DVD, DVD-Video, DVD+R/+RW, DVDR/-RW, DVD+R/-R DL (Dual Layer) • Video CD/SVCD • Audio CD, CD-R/CD-RW, MP3 media, WMA media, JPEG files • DivX (Ultra)/DivX Plus HD media • USB flash drive Region codes You can play discs with the following region codes.
Product overview Main unit a m l b k c d j e f g i h a Disc compartment b STANDBY-ON • Turn on this product or switch to the Eco Power standby mode. c SRC • Select a source. d / • • • Skip to the previous/next track. Skip to the previous/next title or chapter. Tune to a radio station. • Start or pause play. • • Stop play. Erase a program. • Connect to a USB flash drive. • Headphone socket. e f g h i MP3 LINK • Connect to an external audio device. j VOLUME • Adjust volume. • Adjust time.
• Turn on this product or switch to the Eco Power standby mode. When EasyLink is enabled, press and hold for at least three seconds to turn all connected HDMI CEC compliant devices to standby. • b OPEN/CLOSE • Open or close the disc compartment. c RADIO • Switch to FM radio. d DISC/TOP MENU • Switch to the disc source. • BD: Display the top menu. • DVD: Display the title menu. e Color buttons • BD: Select tasks or options.
n • Mute or restore volume. o VOL +/• Adjust volume. • Adjust time. p Alphanumeric buttons • Select an item to play. • Enter numbers/letters/text. q PROGRAM/CLOCK • Program radio stations. • Set the clock. • Display the set clock (unavailable in the tuner mode). r BONUSVIEW • Turn on or off the secondary video in a small screen window during play (applicable only to a Blu-ray disc that supports the BONUSVIEW or Picture-In-Picture feature). s LOUDNESS • Turn on or off automatic loudness adjustment.
• • • Make the following connections to use this product. • Analog stereo system FM antenna USB flash drive Wired/Wireless network English 3 Connect Note • Refer to the type plate at the back or bottom Preparations 1 2 Place the apparatus near to the TV. Place the front left and right speakers at equal distance from the TV and at an angle of approximately 45 degrees from the listening position. of the product for identification and supply ratings.
For the speaker side: 1 2 Option 1: Connect to the HDMI jack Unscrew the speaker connectors. V ID EO OUT ANTENNA FM LAN DIGITAL AV OUT Pr/Cr COAXIAL R Y Pb/Cb COMPONENT For the left speaker, identify the speaker cable that is connected to the left connectors on the main unit. 3 Insert fully the red end of the speaker cable into the red (+) connector. 4 Screw the red (+) connector to secure the cable. 5 Insert fully the silver end of the speaker cable into the black (-) connector.
Y Pb Option 3: Connect to the composite video jack AUDIO IN Pr AUDIO IN VIDEO IN VIDEO OUT Pr/Cr LINE OUT V I DEO O UT Pb/Cb COMPONENT ANTENNA Y FM LAN DIGITAL AV OUT Pr/Cr COAXIAL R Y Pb/Cb COMPONENT OPTICAL DIGITAL AUDIO OUT Wi-Fi L AUX IN LINE OUT VIDEO OUT R ANTENNA L FM LAN DIGITAL AV OUT Pr/Cr COAXIAL R R Y Pb/Cb COMPONENT OPTICAL DIGITAL AUDIO OUT Wi-Fi L SPEAKER OUT L AUX IN LINE OUT R L R L SPEAKER OUT 1 2 Connect the component video cables (not supplied
Connect to an HDMI-compliant AV receiver/amplifier Connect to optical jack V I DE O OU T ANTENNA FM LAN DIGITAL AV OUT COAXIAL Pr/Cr R VI DE O OU T ANTENNA OPTICAL DIGITAL AUDIO OUT Y Pb/Cb COMPONENT Wi-Fi L AUX IN FM LAN DIGITAL AV OUT COAXIAL Pr/Cr LINE OUT R R OPTICAL DIGITAL AUDIO OUT Y Pb/Cb COMPONENT Wi-Fi L L AUX IN OPTICAL LINE OUT R L R SPEAKER OUT L R L SPEAKER OUT HDMI OPTICAL HDMI IN 1 1 Connect an HDMI cable (not supplied) to: • the HDMI jack on this player.
V I DE O OU T 1 ANTENNA FM LAN DIGITAL AV OUT COAXIAL Pr/Cr R OPTICAL DIGITAL AUDIO OUT Y Pb/Cb COMPONENT Wi-Fi L AUX IN LINE OUT R Connect a USB device Connect a USB device to the (USB) jack on the front panel of this product. L R L SPEAKER OUT Note AUX IN LINE OUT R L L R Use this product to play audio from the TV or other device such as a cable box. Tip • Press AUX to select the audio output of your connection.
1 Connect the AC power cable to: • this product. • the wall socket. • This product is ready to be set up for use. 4 Get started Caution • Use of controls or adjustments or VIDE O OUT performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Navigate a menu 1 1 In the Eco Power standby mode, press and hold PROGRAM/CLOCK to activate the clock setting mode. » The hour digits are displayed and begin to blink. 2 Press + VOL - to set the hour, then press PROGRAM/CLOCK again. » The minute digits are displayed and begin to blink. 3 Press + VOL - to set the minute, then press PROGRAM/CLOCK to confirm the clock setting. » [SYNC RDS] (synchronize with RDS clock) or [UNSYNC RDS] (not synchronize with RDS clock) is displayed.
Set up a network You can connect this product to the Internet for software update/BD Live enjoyment. Set up a wired network Note • Ensure that the network cables are properly connected. 1 2 Connect a network cable (not supplied) to: • the LAN port on this product. • the LAN port on a router with Internet connection. Set up a wireless network Note • For wireless connection, you need to use an optional Philips Wi-Fi USB adapter (named WUB1110). • The Wi-Fi USB Adapter (WUB1110) is not included.
One-touch play For the first time you connect the network, install the network connection. 1 1 2 3 4 5 Set up a wired or wireless network. Press to display the home menu. Press (standby) to turn on this product. » The TV (if the TV supports one-touch play) automatically turns on and switches to the correct video-in channel. » If a disc is loaded in this product, disc play automatically starts. Select [Setup] and press OK. Select [Network], and press . Select [Network Installation], and press OK.
5 Press OK to select [Continue]. Philips TV AUX Recorder MP3 DVD player 5 Play Play a disc – Caution • Do not place any objects other than discs into the disc compartment. Select a connected device on the left of the menu, then press . 6 7 Select the connector that is used for the device, then press OK. » Repeat steps 6~7 to map other devices. Press to exit the menu.
Play video Control video play BLU-RAY MICRO SYSTEM MBD3000 1 2 Play a title. Use the remote control to control the play. Button 1 Connect a USB device to the (USB) jack on the front panel of this product. 2 Press , and select [Browse USB], and press OK. » A contents menu is displayed. 3 To stop play, press USB device. or remove the Action Pause play. Start or resume play. Stop play. Skip to a previous/next title or chapter. Search fast-backward or fastforward.
Button Action AUDIO Directly select an audio language or channel on a disc. SUBTITLE Directly select a subtitle language on a disc. MODE/DIM Directly select/turn off the repeat or shuffle mode. • Repeat options may vary from the disc type. • For VCDs, repeat play is only possible when the PBC mode is turned off. OPTIONS Access the above mentioned actions or more options. INFO Display the current status or disc information.
Press the Navigation buttons ( ) to navigate in the zoomed picture. • To cancel zoom mode, press BACK to display the zoom factor bar, and press the Navigation buttons ( ) until the zoom factor [x1] is selected. Repeat play for a specific section 1 2 3 Manually shift subtitle display You can manually adjust the subtitle position on the TV screen. 1 During play, press OPTIONS. » The play options menu is displayed. 2 Select [Subtitle Shift] in the menu, and press OK.
4 Select the language to play, and press OK. Enjoy BD-LIVE (Applicable only to a disc that enables BD-Live bonus content. Ensure that this product is connected to the Internet.) Additional contents (such as movie trailers, subtitles, and son on) can be downloaded to the local storage of this product or a connected USB storage device. Special video data can be played while they are being downloaded.
Control photo play Play a photo slideshow. • Press OPTIONS to access play options, select an option, and press OK. • During slideshow play, you may also press to flip a photo horizontally/vertically. • If the slideshow stops, press to continue play. Control a track 1 2 Play a track. Use the remote control to control the play. Button During play, press OPTIONS. » The play options menu is displayed. 2 Select [Duration per slide] in the menu, and press OK. 3 4 Select a duration, and press OK.
Note 6 Adjust settings • For disc recorded in multiple sessions, only the first session is played. • For a WMA file that is protected by Digital Rights Management (DRM), it cannot be played on this product. • This product does not support MP3PRO audio format. • For any special character that is present in the MP3 track name (ID3) or album name, it might not be displayed correctly on the screen because these characters are not supported.
• • • • [4:3 Letterbox] – For 4:3 screen TV: wide-screen display with black bars on the top and bottom of the screen. [4:3 Panscan] – For 4:3 screen TV: fullheight display with the trimmed sides. [16:9 Widescreen] – For wide-screen TV: display picture at ratio 16:9. [16:9] – For 16:9 screen TV: display picture at ratio 4:3 for a disc with 4:3 ratio, with black bars on the left and right side of the screen. [21:9 Cinema] – For wide-screen TV of display ratio 21:9.
4 5 Select an option, and press OK. • Select a setting, and press OK. • To return to the previous menu, press BACK. • To exit the menu, press . • [Night Mode] Increase a soft sound level such as dialogue to make it easier to hear at a low volume, while simultaneously decreasing a loud sound level. • [Auto] - Detect and select a best sound level at a low volume. Applicable to tracks with Dolby TrueHD audio only. • [On] – For quiet viewing at night. • [Off] – For surround sound with a full dynamic range.
[View Network Settings] Display the information for the current network status. [View Wireless Settings] Display the information for the current Wi-Fi status. If the current network is not set to a wireless connection, this feature is de-activated. EasyLink setup 1 2 3 Press . Select [Setup], and press OK. Select [EasyLink], and press .
Preference setup 1 2 3 Press Select [Preference], and press . Video Audio Network EasyLink Preference Advanced 4 5 . Select [Setup], and press OK. Menu Language Auto (ENG) Audio English (ENG) Subtitle Off Disc Menu English (ENG) Parental Control Off Screen Saver On Auto Subtitle Shift On Change Password Select an option, then press OK. Select a setting, then press OK. • To return to the previous menu, press BACK. • To exit the menu, press .
[VCD PBC] Turn on or off the content menu of VCDs/ SVCDs with PBC (playback control) feature. • [On] - Display the index menu when you load a disc for play. • [Off] - Skip the menu and start play from the first title. [Software Update] Update the software of this product (if a latest version is available on Philips website) to enhance the performance of this product. • [USB] - Update software from the USB device which is connected to this product. • [Network] - Update software from the Internet.
[Version Info.] Display the software version and the MAC address of this player. 7 Tune to FM radio stations Tip • This information is needed for you to check if a latest software version is available at the Philips website so that you can download and install on this player. [Restore Default Settings] Reset all the settings of this player to the factory settings, except for [Parental Control] setting. 1 Ensure that you have connected and fully extended the supplied FM antenna. 2 3 4 Press RADIO.
Note • You can program a maximum of 40 preset radio stations. 1 2 Tune to a radio station. 3 Press / to allocate a number from 1 to 40 to this radio station, then press PROGRAM/CLOCK to confirm. » The preset number and the frequency of the preset station are displayed. 4 Repeat the above steps to program other stations. Note • The accuracy of the transmitted time depends on the RDS station that transmits the time signal.
8 Adjust volume level and sound effect Mute sound 1 During play, press sound. to mute/resume Listen through headphone Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level. Select a sound effect Note • You cannot use different sound effects at the same time. Adjust bass level 1 During play, press BASS to enter bass adjustment. 2 Press VOL +/- to adjust the bass level. Adjust treble level 1 During play, press TREBLE to enter treble adjustment.
Set the sleep timer 1 Adjust brightness of display panel 1 In standby mode, press MODE/DIM repeatedly to select different levels of brightness for the display panel. Set the alarm timer 1 Ensure that you have set the clock correctly. 2 In standby mode, press and hold SLEEP/ TIMER. » The hour digits are displayed and begin to blink. 3 Press + VOL - to set the hour, then press SLEEP/TIMER again. » The minute digits are displayed and begin to blink. 4 Press + VOL - to set the minute.
a Un-zip the download, and make sure that the un-zipped folder is named “UPG”. b Put the “UPG” folder in the root directory. 3 Insert the USB flash drive to the (USB) jack on the front panel of this product. 4 In the Home menu, select [Setup] > [Advanced] > [Software Update] > [USB]. 5 Follow the instructions on the TV screen to confirm update operation. » Once software update is complete, this product restarts automatically.
• Sensitivity: >80dB/m/W ± 4dB/m/W Dimensions: (w x h x d): 160 x 255 x 2240 (mm) Net weight: 3.5 kg • Output power: • BD: Max. ratings: 20mW • DVD: Max. ratings: 7mW • CD: Max. ratings: 7mW English • • Accessories supplied • Remote control and batteries • Audio/Video cables • Power cable • FM wire antenna • MP3 LINK cable • Quick start guide • User manual Optional accessory • A wireless Philips USB adapter(named WUB1110, sold separately) • Multimedia connections: Wi-Fi 802.
10 Troubleshooting • • Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. Main unit No reaction to the remote control. • Connect this product to the power outlet.
DivX video files cannot be played. • Ensure that the DivX video file is complete. • Ensure that the file name extension is correct. Network Wireless network is not found or distorted. • Microwave ovens, DECT phones or other wireless devices in your neighborhood might disturb the wireless network. • Make sure that the firewalls in your network allow access to the wireless connection of this product.
11 Glossary A Aspect ratio Aspect ratio refers to the width to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. AVCHD AVCHD is a format (standard) for high definition video cameras that can be used to record and play high-resolution HD images.
R JPEG A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. Files are recognized by their file extension ‘.jpg’ or ‘.jpeg.’ Region code A system that allows discs to be played only in the region designated. This unit only plays discs that have compatible region codes. You can find the region code of your unit on the product label.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. MBD3000_12_UM_V2.
