Register your product and get support at www.philips.
Press & HOLD Play button for 3 seconds
1 Important 4 Disposal of your old product and batteries Hearing safety Copyright notice Trademark notice 5 5 6 6 7 8 2 3 Your Blu-ray Component Hi-Fi System 8 Feature highlights Playable media Product overview 8 8 9 Connect 12 Preparations Connect speakers Connect video/audio cables Route audio to other devices Route audio from other devices Connect FM antenna Connect a USB device Connect a network Connect power 12 12 13 14 15 16 16 17 17 9 Tune to FM radio stations 33 Program radio stat
1 Important • Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use. • Never place the product and accessories near naked flames or other heat sources, including direct sunlight.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
Copyright notice This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Open source software Philips Electronics Hong Kong Ltd. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses.
E n glis h Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries.
2 Your Blu-ray Component HiFi System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers (e.g. product software upgrade), register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this product. The model number and serial number are on the bottom of this product. Write the numbers here: Model No. _______________________ Serial No.
E n glis h Product overview Main unit SOURCE a b d c n ml k a e j f i e • Turn on this product or switch to Eco Power standby mode. When EasyLink is enabled, press and hold for at least three seconds to turn all connected HDMI CEC compliant devices to standby. (Press and hold) switch between normal standby mode and Eco Power standby mode. • • b SOURCE • Select a source. c / • • Skip to the previous/next track or radio station. Skip to the previous/next title or chapter.
j Display panel a k Disc compartment • l • • Headphone socket. m MP3 LINK • Connect to an external audio device. • n • Connect to a USB flash drive. b Source and color buttons • Select a source. • BD-live: Select tasks or options. Remote control a z y Turn on this product or switch to Eco Power standby mode. When EasyLink is enabled, press and hold for at least three seconds to turn all connected HDMI CEC compliant devices to standby.
/ • Skip to the previous or next title, chapter, or track. Skip to the previous/next title or chapter. • j / • • Search backward or forward. Tune to a radio station. k TREBLE • Enable treble adjustment. x DISC/POP-UP/MENU • BD: Access or exit the pop-up menu. • DVD: Access or exit the disc menu. y SLEEP/TIMER • Set the sleep timer. • Set the alarm timer. z TOP MENU • BD: Display the top menu. • DVD: Display the title menu. l BASS • Enable bass adjustment.
3 Connect Make the following connections to use this product. • • • • Preparations 1 2 • Digital AV amplifier/receiver • Analog stereo system FM antenna USB flash drive iPod/iPhone dock (compatible dock: DCK3060; not supplied) Wired/Wireless network Note Place the apparatus near to the TV. • Refer to the type plate at the back or bottom of the Place the front left and right speakers at equal distance from the TV and at an angle of approximately 45 degrees from the listening position.
Screw the left red (+) connector to secure the cable. Connect video/audio cables 4 Insert fully the silver end of a speaker cable into the left black (-) connector. 5 Screw the left black (-) connector to secure the cable. 6 Repeat steps 2-5 to insert the other speaker cable into the right connectors. Select the best video connection that the TV can support. • Option 1: Connect to the HDMI jack (for an HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to the composite video jack L Route audio to other devices You can route the audio from this product to other devices. R LINE IN VIDEO IN Connect to an HDMI-compliant AV receiver/amplifier L L R VIDEO OUT L R AUX IN L R LINE OUT LINE OUT R AUX IN L HDMI IN R LINE OUT 1 2 Connect a composite video cable to: • the VIDEO jack on this product. • the VIDEO input jack on the TV. Connect the audio cables to: • the LINE OUT/AUDIO -L/R jacks on this product.
COAXIAL L L R R LINE OUT Route audio from other devices E n glis h Connect to a digital AV amplifier/ receiver Route audio from TV or other devices AUX IN Use this product to play audio from the TV or other device such as a cable box. DIGITAL OUT L COAXIAL R LINE OUT 1 Connect a coaxial cable (not supplied) to: • the COAXIAL jack on this product. • the COAXIAL/DIGITAL input jack on the device.
Listen to an audio player You can listen to an audio player through this unit. Tip • Press USB/DOCK to select the audio output of your connection. Connect FM antenna MP3-LINK Tip • For optimal reception, fully extend and adjust the position of the antenna. • For better FM stereo reception, connect an outdoor FM antenna to the FM jack. • The unit does not support MW radio reception. • Connect the supplied MP3 Link cable to the MP3-LINK socket and to the headphone socket on the audio player.
With a wired or wireless connection (see “Get started” > “Set up a network”), you can connect this product to the Internet for software update/BD Live. 1 Connect the AC power cable to: • this product. • the wall socket. • This product is ready to be set up for use.
4 Get started Turn on 1 Caution Press . » The unit switches to the last selected source. • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Switch to normal standby mode • Always follow the instructions in this chapter in sequence. Press to switch the unit to normal standby mode. » The clock (if set) is displayed.
In this mode, you can see an overview of all features. 1 In normal standby mode, press and hold on the main unit to activate demonstration mode. » A demonstration of major available features starts. Navigate a menu 1 When a menu is displayed, press the buttons on the remote control to navigate. Button Action OK Move up or down. Move left or right. Confirm a selection. Enter numbers/letters/ text. To deactivate the demonstration mode: 1 Press on the main unit again.
Set up a wireless network Set up a network You can connect this product to the Internet for software update/BD Live enjoyment. Note • For wireless connection, you need to use an optional Philips Wi-Fi USB adapter (named WUB1110). • The Wi-Fi USB Adapter (WUB1110) is not included. Set up a wired network To purchase this adapter, visit shop.philips.com. If the Philips online shop is not available in your country, please contact Philips customer service. For contact details, go to www.philips.com/support.
For the first time you connect the network, install the network connection. 1 2 3 4 5 Set up a wired or wireless network. Press to display the home menu. Select [Setup] and press OK. Select [Network Setup], and press . Use Philips EasyLink This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control EasyLink-compliant devices that are connected through HDMI connectors. Select [Network Installation], and press OK.
Map the devices to the audio inputs Note • Before you start, ensure that the audio output of the HDMI TV and other HDMI devices have been connected to the audio input jacks on this product. Video Setup Audio Setup Network Setup EasyLink Setup EasyLink On One Touch Play On One Touch Standby On System Audio Control Off Update audio mapping from connected devices If you have already mapped audio from connected devices, you can use this procedure to update your mapping.
E n glis h 5 Play Play a disc Caution • Do not place any objects other than discs into the disc compartment. 1 Press OPEN/CLOSE compartment. 2 3 Insert a disc with its label facing up. 1 Prepare a USB device that contains playable media files. 2 Connect the USB device to the (USB) socket on the front panel of this unit. » After the unit reads files in the USB device successfully, play starts automatically. 3 Press BACK. » A contents menu is displayed. 4 Select a file to play, and press OK.
VCD/SVCD/DivX disc: • DISC MENU: display the content of the disc. Play video Control video play 1 2 Tip Play a title. Use the remote control to control the play. Button / menu and starts play from the first title. To display the menu before play, turn on the PBC setting (see “Adjust settings” > [Preference] > [VCD PBC]). Action Pause play. Start or resume play. Stop play. Skip to a previous/next title or chapter. Search fast-backward or fastforward. Press repeatedly to change the search speed.
Repeat play for a specific section 1 During play, press MODE/OPTIONS. » The play options menu is displayed. 2 Select [Repeat A-B] in the menu, and press OK to set the starting point. 3 Continue the video play, and press OK to set the ending point. » Repeat play starts. • To cancel repeat play mode, press MODE/OPTIONS, and select [Repeat A-B] and press OK. • Subtitle shift is not supported for DivX video with external subtitles.
Play DivX® video Note DivX video is a digital media format that retains high quality despite a high rate of compression. 1 Insert a disc or USB device that contains the DivX videos. 2 Press , select [Play Disc] or [Browse USB], and press OK. » A contents menu is displayed. 3 4 5 Select a video folder, and press OK. • It may require longer time to display the disc content • • Select a title to play, and press OK. Control photo play Use the remote control to control the play.
Button Create a musical slideshow to play simultaneously MP3/WMA music files and JPEG photo files. Action Pause play. Start or resume play. Stop play. Skip to a previous/next track. Select an item to play. / Note • To create a musical slideshow, you must store the MP3/ WMA and JPEG files on the same disc or USB device. / 1 2 3 Play MP3/WMA music. Press BACK to return to the main menu. Navigate to enter a photo folder, and press OK to start slideshow play.
6 Adjust settings • • • Note • If the setup option is grayed out, it means the setting cannot be changed at the current state. Video setup 1 2 3 Press Note • If [4:3 Panscan] you have selected is not supported . by the disc, the screen displays in the [4:3 Letterbox] format. Select [Setup], and press OK. Select [Video Setup], and press . Video Setup Audio Setup Network Setup Standard EasyLink Setup Preference Advanced 4 5 Select an option, then press OK. Select a setting, then press OK.
Audio setup 1 2 3 Press . Select [Setup], and press OK. Select [Audio Setup], and press . Video Setup Off Auto Audio Setup Network Setup Auto On EasyLink Setup Preference Advanced 4 5 Select an option, and press OK. Note E n glis h [Picture Settings] Select a predefined set of picture color settings. • [Standard] – Original color setting. • [Vivid] – Vibrant color setting. • [Cool] - Soft color setting. • [Action] – Sharp color setting. It enhances the details in the dark area.
Network setup EasyLink setup 1 2 3 1 2 3 Press . Select [Setup], and press OK. Select [Network Setup], and press . Video Setup Network Installation Press . Select [Setup], and press OK. Select [EasyLink Setup], and press . Video Setup View Network Settings Audio Setup 4 5 Audio Setup View Wireless Settings Network Setup Network Setup EasyLink Setup EasyLink Setup Preference Preference Advanced Advanced Select an option, then press OK. Select a setting, then press OK.
[Audio Input Mapping] Updates audio input mapping if there are new devices connected. Note • You must turn on the HDMI CEC operations on • the TV/devices before you can enjoy the EasyLink controls. See the TV/devices manual for details. Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices. [Menu Language] Select an on-screen menu language.
• • [On] - Set the screen saver active after 10 minutes of inactivity (for example, in the pause or stop mode) [Off] - Disable screen saver mode. [Change Password] Set or change the password. 1) Press the Numeric buttons to enter the password or your last set password. If you forget the password, enter ‘0000’, then press . 2) Enter the new password. 3) Re-enter the password. 4) Move to [Confirm] in the menu and press OK. [Display Panel] Select a brightness level of the front panel display.
7 Tune to FM radio stations E n glis h [Version Info.] Display the software version and the MAC address of this player. Tip • This information is needed for you to check if a latest software version is available at the Philips website so that you can download and install on this player. [Restore Default Settings] Reset all the settings of this player to the factory settings, except for [Parental Control] setting. 1 Ensure that you have connected and fully extended the supplied FM antenna.
Program radio stations manually Note 8 Adjust volume level and sound effect • You can program a maximum of 40 preset radio stations. 1 2 3 4 Tune to a radio station. Press PROGRAM to activate programming. Press / to allocate a number from 1 to 40 to this radio station, then press PROGRAM to confirm. » The preset number and the frequency of the preset station are displayed. Repeat the above steps to program other stations.
1 During play, press sound. to mute/resume 9 Additional Information E n glis h Mute sound Listen through headphone Adjust brightness of display panel 1 1 Plug a headphone into the the unit. socket on In standby mode, press DIM repeatedly to select different levels of brightness for the display panel. Turn on or off LED light 1 In power-on mode, press and hold DIM to turn on or off the LED light at the bottom of the unit and at the volume knob.
7 8 Press SLEEP /TIMER to confirm. » The volume level indicator begins to blink. Update software via network 1 Set up the internet connection (see “Get started’ > “Set up a network”). Press VOL +/- to set the volume level, then press SLEEP /TIMER to confirm. » An alarm icon is displayed. 2 In the Home menu, select [Setup] > [Advanced] > [Software Update] > [Network]. » You are prompted to start the upgrading process if upgrade media is detected.
Caution • Never use solvents such as benzene, thinner, cleaners available commercially, or anti-static sprays intended for discs. Clean discs Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement. Specifications Note • Specifications are subject to change without notice Video • Video DAC: 12Bits • Signal system: PAL / NTSC • Video format: 4:3 / 16:9 • Video S/N: > 60dB • HDMI output: 480p, 576p, 720p, 1080i,1080p, 1080p24 Audio line-out • Output level: 2.
Laser Specification • Laser Type: • BD Laser Diode: InGaN/AIGaN • DVD Laser Diode: InGaAIP • CD Laser Diode:A IGaAs • Wave length: • BD: 405 + 7 nm/-7 nm • DVD: 655 + 10nm/-10nm • CD: 790 + 10nm/-20nm • Output power: • BD: Max. ratings: 20mW • DVD: Max. ratings: 7mW • CD: Max. ratings: 7mW Tuner (FM) • Tuning range: 87.
Play No picture. • See TV manual for correct video input selection. Change the TV channel until you see the Philips screen. Disc cannot be played. • Ensure that the disc is correctly loaded. • Ensure that this product supports the disc (see “Your Blu-ray Component Hi-Fi System” > “Playable media”). • Ensure that this product supports the region code of the DVD or BD. • For DVD±RW or DVD±R, ensure that the disc is finalized. • Clean the disc. No picture on HDMI connection.
Unable to access BD-Live feature. • Check the network connection or make sure that the network has been set up (see “Get started” > “Set up a network”). • To free space, delete downloaded BDLive data on the connected USB storage device (see “Adjust settings” > “Advanced setup” > [Clear Memory]). • Make sure that the BD disc supports BDLive feature. Poor radio reception • Increase the distance between the apparatus and your TV or VCR. • Fully extend the FM antenna. • Connect an outdoor FM antenna instead.
DivX Video-On-Demand This DivX Certified ® device must be registered in order to play DivX Video-onDemand (VOD) content. To generate the registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX video. Dolby Digital A surround sound system developed by Dolby Laboratories that contains up to six channels of digital audio (front left and right, surround left and right, center and subwoofer.
R Region code A system that allows discs to be played only in the region designated. This unit only plays discs that have compatible region codes. You can find the region code of your unit on the product label. Some discs are compatible with more than one region (or ALL regions.) W WMA Windows Media™ Audio. Refers to an audio compression technology developed by Microsoft Corporation. WMA data can be encoded with Windows Media player version 9 or Windows Media player for Windows XP.
O O O O O O X O O O O O X O O O O O X O O O O O X O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363 – 2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363 - 2006.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. MBD7020_93_UM_V1.