Operation Manual

ManualsBrandsPhilips ManualsAudiomc 160

English

3141 075 20021

Tape Operation / Recording

General information on

recording

● Recording is permissible insofar as copyright or

other rights of third parties are not infringed.

● For recording, use only NORMAL (IEC type I)

tapes on which the tabs have not yet been

broken. This deck is not suited for recording on

METAL (IEC IV) type tapes.

● The best recording level is set automatically.

Altering the VOLUME, INCREDIBLE

SURROUND, DBB or INTERACTIVE SOUND

controls will not affect the recording in progress.

● The recording sound quality might differ

depending on the quality of your recording

source and the recording tape.

● At the very beginning and end of the tape, no

recording will take place during the 7 seconds

when the leader tape passes the recorder heads.

● To protect a tape from accidental erasure, have

the tape in front of you and break out the left

tab. Recording on this side is no longer possible.

If, however, you wish to record over this side

again, cover the tabs with a piece of adhesive

tape.

Synchro start CD recording

1 Select CD source.

2 Insert a disc and if desired, programme track

numbers.

3 Press STOP•OPEN to open the tape door.

4 Insert a suitable tape into the deck and close the

tape door.

5 Press RECORD to start recording.

➜ Playing of the CD programme starts

automatically from the beginning of the CD

after 7 seconds. It is not necessary to start the

CD player separately.

Tape playback

1 Select TAPE source.

➜ Display: shows TAPE throughout tape

operation.

2 Press STOP•OPEN to open the tape door.

3 Insert a recorded tape and close the tape door.

● Load the tape with the open side downward and

the full spool to the left.

4 Press PLAY 2 to start playback.

5 To pause, press PAUSE . Press again to resume.

6 By pressing à or á on the system fast winding

of tape is possible in both directions.

7 To stop the tape, press STOP•OPEN.

● The keys are automatically released at the end of

a tape, except if PAU SE has been activated.

Note:

– The sound source cannot be changed while

recording a tape.