Micro Hi-Fi System 220 MC- 1 3140 115 30081
Important notes for users in the U.K. Italia DICHIARAZIONE DI CONFORMITA’ Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Si dichiara che l’apparecchio MC-220 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. 1 2 Remove fuse cover and fuse. Fatto a Eindhoven 3 Refit the fuse cover. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
% ! 2 CD 0 REPEAT ^ & TUNER TAPE SHUFFLE AUX SLEEP ) 5 VOL 9 6 * DSC DBB MUTE IS NEWS/TA ( $ # @ ! STANDBY-ON PROGRAM TIMER ON OFF RDS CLOCK REPEAT REV MODE BAND SHUFFLE SIDE A/B 1 2 3 PROGRAM SHUFFLE 0 RECORD 9 8 4 SOURCE SELECT PREV PLAY•PAUSE NEXT STOP iR 5 6 7 3 3 3140 115 30081
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
English Index Français English ------------------------------------------------ 6 Español Français -------------------------------------------- 23 Deutsch Español --------------------------------------------- 40 Nederlands Deutsch --------------------------------------------- 57 Italiano Nederlands ---------------------------------------- 74 Svenska Italiano ---------------------------------------------- 91 Dansk Svenska ------------------------------------------- 108 Suomi Dansk ----------
Contents English General Information Clock/Timer Environmental information ................................ 7 Supplied accessories ............................................ 7 Safety information ................................................ 7 Setting the clock ................................................. 19 Setting the timer ................................................. 19 Activating and deactivating TIMER ................. 19 Activating and deactivating SLEEP ..................
This product complies with the radio interference requirements of the European Community. Environmental Information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
Preparations English AM loop antenna FM wire antenna speakers (right) AM aerial B C speakers (left) A AC power cord Rear connections The type plate is located at the rear of the system. A Power B Antennas Connection Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception. AM Antenna Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
FM Antenna English Preparations Optional connection The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details. ● For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal. C Speakers Connection Front Speakers Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left speaker to "LEFT", coloured (marked) wire to "+" and black (unmarked) wire to "-".
Controls (illustrations on page 3) English Controls on the system and remote control 1 CLOCK / RDS 2 3 4 – 5 – – 6 7 – 8 – 9 for Tuner ............. displays RDS information. for Clock ............ sets the clock function. for Tape ............... shows tape counter in recording mode. REPEAT/ REV MODE/ BAND for CD ................. repeats a track/CD programme/ entire CD. for Tape ............... selects tape reverse modes. for Tuner ............. selects waveband. SHUFFLE/ SIDE A/B for CD ........
Adjusting volume and sound STANDBY-ON PROGRAM TIMER ON OFF RDS CLOCK REPEAT REV MODE BAND 1 Turn the VOLUME control anti-clockwise to decrease or clockwise to increase volume on the system (or press VOL -/+ on the remote control). ➜ Display shows the volume level VOL and a number from 0-32.
CD Operation English STANDBY-ON PROGRAM TIMER ON OFF RDS CLOCK REPEAT REV MODE BAND PREV PLAY•PAUSE To interrupt playback press PLAY•PAUSE 2; (on the remote control 2;). Press PLAY•PAUSE 2; (on the remote control 2;) again to resume play. ➜ The display freezes and the elapsed playing time flashes when playback is interrupted. 6 To stop disc playback, press STOP 9. SHUFFLE SIDE A/B SOURCE SELECT RECORD 5 Note: CD play will also stop when; – the CD door is opened. – the disc has reached the end.
Programming track numbers Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAMME. 1 Press PROGRAM to enter the programming mode. ➜ A track number is shown and PROGRAM flashes. 2 Use the PREV ¡1 or NEXT 2™ (on the remote control ¡ or ™) to select your desired track number.
Radio Reception English Programming radio stations You can store up to a total of 40 radio stations in the memory. STANDBY-ON PROGRAM TIMER ON OFF RDS CLOCK REPEAT REV MODE BAND SHUFFLE Automatic programming Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden. The system will only programme stations which are not in the memory already.
(PTY) Tuning to preset radio stations PTY helps you find a desired programme type. To enable PTY, first programme RDS stations into the tuner memory (see “Programming radio stations”) ● Press PRESET 3 or 4 (on the remote control ¡ or ™ ) until the desired preset station is displayed. RDS Radio Data System is a service that allows FM stations to show additional information. If you are receiving a RDS station, and the station name are displayed.
Radio Reception English Announcement (TA) You may set up the tuner in such a way that listening to CD or tape is interrupted by the NEWS of a RDS station. This only works if the RDS station broadcasts a NEWS signal while sending the news. 1 2 Tune to the desired RDS station. Press NEWS/TA once or more on the remote control to select the NEWS option. DBB IS ➜ NEWS ON, TA ON or OFF is NEWS/TA displayed briefly. ➜ NEWS is displayed if you have activated the NEWS or TA option.
English Tape Operation / Recording Switching tape sides The tape side can be switched manually or automatically before or during tape playback. STANDBY-ON PROGRAM TIMER ON OFF RDS CLOCK SHUFFLE REPEAT REV MODE BAND SIDE A/B SOURCE SELECT RECORD PREV PLAY•PAUSE NEXT STOP iR Tape playback 1 Select TAPE source. ➜ The display shows TAPE briefly. The tape counter TAPE 000 display with the SIDE A or SIDE B and reverse mode status are then shown during tape mode.
Tape Operation / Recording English Synchro start CD recording Recording timer 1 2 Select CD source. To record from the radio, you will need to use a preset radio station and to set a start (ON) and finish (OFF) time. 3 4 Press OPEN to open the tape door. Insert a disc and if desired, programme track numbers. Insert a suitable tape into the deck and close the tape door. 5 Press RECORD to start recording. ➜ COPY or RECORD is displayed briefly and RECORD is shown during recording.
Setting the timer STANDBY-ON PROGRAM TIMER ON OFF RDS CLOCK REPEAT REV MODE BAND SHUFFLE SIDE A/B SOURCE SELECT RECORD PREV PLAY•PAUSE NEXT STOP iR 1 In any mode, press TIMER ON•OFF for more than 2 seconds. 2 Turn VOLUME clockwise to select sound source. ➜ Display sequence shows CD, TUNER, TAPE or REC TUNER. 3 Press CLOCK for more than 2 seconds. ➜ SEARCH RDS TIME is displayed for a maximum of 90 seconds; the time is then displayed.
Clock/Timer English Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time. The clock time needs to be set first before the sleep timer can be used. ● To deactivate, press SLEEP on the remote control once or more until SLEEP OFF is shown, or press STANDBY ON on the system or remote control. ➜ SLEEP OFF scrolls across the display. TAPE AUX ● Press SLEEP on the remote control once or more.
Cleaning the Cabinet ● Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs ● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. ● Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens ● After prolonged use, dirt or dust may accumulate at the disc lens.
Troubleshooting English RADIO RECEPTION Radio reception is poor. TAPE OPERATION / RECORDING Recording or playback cannot be made. “CHECK TAPE” is displayed. The tape deck door cannot open. GENERAL The system does not react when buttons are pressed. Sound cannot be heard or is of poor quality. The left and right sound outputs are reversed. The remote control does not function properly. The timer is not working. The Clock/Timer setting is erased.
