MC235B MC235 Micro Hi-Fi System User manual MC235B_235_79_Eng 1 13/2/07, 18:04
MC235B_235_79_Eng 2 13/2/07, 16:43 3140 115 xxxxx
1 3 ! 5 7 # $ @ 0 8 % * & ^ ( ) 2 5 1 3 4 6 7 8 ! 9 0 3 MC235B_235_79_Eng 3 3 13/2/07, 16:43 3140 115 xxxxx
Hearing Safety Listen at a moderate volume. ● Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. ● Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound.
Français English ------------------------------------------------ 6 English Index CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Contents English General Information Radio Reception Environmental information ................................ 7 Supplied accessories ............................................ 7 Safety information ................................................ 7 Tuning to radio stations .................................... 14 Programming radio stations ............................. 14 Tuning to preset radio stations ....................... 14 Changing tuning grid ..........................................
Safety Information Supplied accessories – – – – – – 2 speaker boxes remote control (with battery) MW loop antenna FM wire antenna stand screw and plug assembly x2 Environmental Information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
Preparations English FMFM wire antenna antenna MWAM looploop antenna antenna Speakers Right speaker Speakers (left) Left speaker (right) ACpower power cord cord AC B Antennas Connection Rear connections The type plate is located at the rear of the system. Connect the supplied MW loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.
FM Antenna Before using the remote control 1 2 1 2 3 ● For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal. C Speakers Connection Pull out the plastic protective sheet. Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD, TUNER). Then select the desired function (for example ÉÅ , í , ë).
Controls (illustrations on page 3) English Controls on the system and remote control ^ RDS.NEWS – 1 STANDBY-ON & – – 2 – 3 – 4 – 5 – 6 7 8 – 9 – 0 ! – @ – – # – $ – % – switches the system on or to standby. Display shows the status of the system. OPEN • CLOSEç opens/ closes the CD door. IR remote sensor VOLUME (3 / 4) (+/-) adjusts the volume level. CD Door Mode Selection SEARCH/ TUNE (à / á) for TUNER ........ tunes to a station for CD .................
Adjusting volume and sound IMPORTANT! Before you operate the system, complete the preparation procedures. Switching the system on ● Press STANDBY-ON / 2. ➜ The system will switch to the last selected source. ● Press SOURCE (or CD, TUNER or AUX on the remote control). ➜ The system will switch to the selected source. ● Press OPEN • CLOSEç. 1 Press the VOLUME 3 / 4 (+/-) control to decrease or increase the volume. ➜ Display shows the volume level VOL and a number from MIN1, 2, ...30, 31 MAX.
CD Operation English 4 PressÉÅto start playback. ➜ Current track number and elapsed playing time of the track are displayed during disc playback. 5 To interrupt playback pressÉÅ. PressÉÅ again to resume play. 6 To stop disc playback, press STOP 9. Note: CD play will also stop when; – the CD door is opened. – the disc has reached the end. – you select another source: TUNER, AUX or standby. Selecting a different track IMPORTANT! The lens of the CD player should never be touched.
➜ The number of tracks programmed and the total playing time of the programme are show briefly, then the selected track and PROG. Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAMME. SHUFFLE ......... tracks of the entire disc/ programme are played in random order SHUFFLE and REPEAT ALL…to repeat the entire disc/ programme continuously in random order REPEAT ALL ...
Radio Reception English 2 Press PROGRAM for more than 2 seconds to activate programming. ➜ AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by AM. The last preset automatically stored will then be played. Manual programming Tuning to radio stations 1 Press SOURCE to select TUNER. ➜ TUNER is displayed briefly. 2 Press BAND (or TUNER on the remote control) once or more to select your waveband. (FM/ AM) 3 Press and hold TUNE à or á.
2 Press SOURCE or VOLUME +/- to select sound source. ➜ Display sequence shows CD, TUNER. ➜ flashes. 3 Press TIMER to confirm your desired mode. 4 5 Press VOLUME +/- to set the hours. 6 7 Press VOLUME +/- to set the minutes. Press TIMER again. ➜ The clock digits for the minutes flash. Press TIMER to confirm the time. ➜ The timer is now set and activated.
Specifications English AMPLIFIER Output power ................................ 20 W total power ............................................................................ 2 x 5W RMS Signal-to-noise ratio .......................... ≥ 62 dBA (IEC) Frequency response ......... 63 – 16000 Hz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) Impedance loudspeakers ......................................... 4 Ω Impedance headphones ....................
WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution CD OPERATION “NO DISC” is displayed. – Insert a disc. – Check if the disc is inserted upside down.
AUSTRALIA - Philips Manufacturers Warranty for Australia only These warranty conditions are valid for the following consumer electronics products: Colour Televisions, Projection TV, Plasma & LCD TV, Video Cassette Recorders, CD Recorders & Players, DVD Players, DVD Recorders, DVD Recorders with HDD, Audio Systems, Home Theatre systems, Digital Set Top Box & Portable Audio products.
New Zealand - Guarantee and Service for New Zealand Thank-you for purchasing this quality Philips product. Philips New Zealand Ltd guarantees this product against defective components and faulty workmanship for a period of 12 months. Any defect in materials or workmanship occurring within 12 months from the date of purchase subject to the following conditions will be rectified free of charge by the retailer from whom this product was purchased. 1.
English Meet Philips at the Internet http://www.philips.
