Quick Install Guide

210 mm (8.26")
Speaker Right
Main Unit
Holes
Speaker Left
Wall mounting instructions
Drill holes on wall at hole positions marked.
Use screws to mount the main unit on the wall.
• Use this sheet as a template. Mark the position where you want to hang the unit on the
wall (as shown) and then drill two 6mm diameter holes.
• Secure the dowels and screws in the holes respectively, Leaving the screws 5mm proud
of the wall.
• Hang the unit on the fastening screws.
Use the stand to place the main unit on a flat surface.
• Before operating the unit, please make sure you install the unit and stand correctly.
• Side the stand into the slot as shown.
MC230_05 8/2/07, 19:431