Quick start guide

MCB395

Quick Start Guide

What’s in the Box?

You should find these items upon opening the box.

Quick Start Guide

User Manual

Quick start guide User manual

Remote control with

1 x CR2025 battery

Pull out the plastic

protective sheet

before use.

MCB395 QSG_05-Eng 2008.4.25, 10:031

PAGE 1
MCB395 Quick Start Guide What’s in the Box? You should find these items upon opening the box. Quic k St art User Man ual Pull out the plastic protective sheet before use. Guid e Quick start guide MCB395 QSG_05-Eng User manual 1 Remote control with 1 x CR2025 battery 2008.4.
PAGE 2
1 Connect the speaker cables. 2 Connect the power plug to AC power socket. Tip See the User Manual for how to connect other equipment to this system. DAB/FM T-type antenna Speaker (right) Speaker (left) 1 2 AC power cord MCB395 QSG_05-Eng 2 2008.4.
PAGE 3
Setting the clock IMPORTANT! – To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON 2 on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below. 1 In the standby mode, press and hold CLOCK on the remote control. ➜ The clock digits for the hours continue to flash. 2 Adjust VOLUME -/+ (or press VOL +/- on the remote control) to set the hours. 3 Press CLOCK to confirm. ➜ The minute digits start flashing.
PAGE 4
C 1 Enjoy Programming and tuning to FM radio stations Press SOURCE repeatedly (or FM on the remote control) to select the tuner source. 2 Press PROG on the remote control) for more than two seconds to program all available stations in order of waveband. 3 Press ALBUM/PRESET 4 or 3 (or ¡ / ™ on the remote control) until the desired preset station is displayed.