Register your product and get support at www.philips.
1 Important Safety Notice 2 Your DVD Micro Theater Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Connect Place the unit Connect speakers Connect FM antenna Connect TV Connect power 4 Get started Prepare the remote control Set clock Turn on Find the correct viewing channel Select the correct TV system Change system menu language Turn on Progressive Scan 5 Play Play a disc Play from USB Play DivX video Play control Play options Picture vi
1 Important Safety Know these safety symbols g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Do not mix batteries (old and new or carbon and alkaline, etc.). Remove batteries when the unit is not used for a long time. o Apparatus shall not be exposed to dripping or splashing. p Do not place any sources of danger on q This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations.
Notice This apparatus includes this label: ! / $ $ ! device that are not expressly approved by Philips Consumer Lifestyle may void the user’s ! ! ( $ ; Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.
You can play DVD discs with the following region codes: E n g l i sh 2 Your DVD Micro Theater DVD region code Countries ) ' ) J Congratulations on your purchase, and ' $ ! \ # % # $ ! support that Philips offers, register your product at www.Philips.com/welcome.
Overview of the main unit a b c d e f o a Turn on the apparatus; switch to standby mode. b VOLUME / Adjust volume. Adjust time. n e Open or close the disc compartment. m l h DBB Turn on or off dynamic bass enhancement. i Start or pause play. Stop play. In demo mode, activate or deactivate demonstration. j c SOURCE Select a source. d Display panel Display current status. g h ijk k MODE Select repeat play modes.
c DISPLAY/RDS (RDS function unavailable Display play information on a connected TV. a b x c w v d e u f d DISC MENU For video discs: access or exit the disc menu. For video discs with playback control(PBC): turn on/off PBC. e AUDIO For VCD, select stereo, mono-left or mono-right channel. For DVD/DivX video, select an audio language. f t s h r i q j k l m n o / g p E n g l i sh b Source selection keys Select a source.
l SLEEP/TIMER Set the sleep timer. Set the alarm timer. 3 Connect m SUBTITLE Select a subtitle language. Place the unit n GOTO During disc play, specify a position to start play. o ANGLE/PROG Select a DVD camera angle. Program radio stations. p Numeric keypad Select a title/chapter/track directly. q r Stop play. / Skip to the previous/next track. Skip to the previous/next title or chapter. Select a preset radio station. 1 2 s Place the unit near to the TV.
3 q ' ! " ? ; Insert the stripped part of the wire completely. Insert the right speaker wires to “R”, left speaker wires to “L”. Insert the red wires to “+”, black wires to “-”. ! " ? ; a b c Connect FM antenna Connect TV E n g l i sh 1 2 Connect video cables With this connection, you can watch video from the unit on the TV screen. You can select the best video connection that your TV supports. Option 1: Connect through SCART (for a standard TV).
Note ! / @ @ ( @ % Option 3: Connect through composite video when a progressive scan TV is connected. If your TV does not support progressive scan, you 8 cannot view the picture. For how to activate progressive scan on your TV, refer to the TV user manual.
E n g l i sh 4 Get started Connect power 8 Caution Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Caution Risk of product damage! Ensure that the power supply 1 voltage corresponds to the voltage printed on the back or the underside of the unit. Before connecting the AC power cord, ensure you have completed all other connections.
3 Set clock 1 In the standby mode, press and hold CLOCK to activate the clock setting mode. » The hour digits are displayed and begin to blink. 2 Press + VOL - to set the hour, then press CLOCK again. » The minute digits are displayed and begin to blink. 3 4 The video-in channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO etc. See the TV user manual on how to select the correct input on the TV.
5 Play E n g l i sh Turn on Progressive Scan Progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinary TV system). With nearly double the number of lines, progressive scan offers higher ( ; Note ! $ ) $ ## ; Before you turn on this feature, ensure that: The TV supports progressive scan signals. You have connected this unit with the TV through component video. 1 2 Play a disc Turn on the TV.
To access or exit the menu manually: 1 Press DISC MENU. ! $%& ' ) * % )*% ; < # With the PBC feature, you can play VCD interactively according to the menu screen. 1 During play, press DISC MENU to enable/ disable PBC. » When PBC is enabled, the menu screen is displayed. Play from USB Note Ensure that the USB device contains playable music, pictures or video. 1 Insert the USB device. 2 3 Press USB to select the USB source.
. To stop play, press . To pause or resume play, press . To change a subtitle language, press SUBTITLE. Play control = > ? 1 Note You can only play DivX videos rented or purchased through the DivX registration code of this unit. % ' ! ! # ' / $ } ; ) .smi, .sub, .ssa, .
Play starts automatically at your selected point. Resume video play from last stopped point Change the audio channel Note This feature is only available for VCD/DivX play. 1 Note This feature is only available for DVD/VCD play. 1 In stop mode and when the disc has not been removed, press .
1 2 3 4 [Night Mode] Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others. [On] & ( @ ' / /! only). [Off] – enjoy surround sound with its full dynamic range. Press SYSTEM MENU. Select a setup page. Select an option and then press . Select a setting and then press OK. To return to the previous menu, press . To exit the menu, press SYSTEM MENU.
[Picture Setting] Customize picture color settings. [Component Video] Set the video output according to the video connection. If the composite connection is used, ! / ( ; [S-VIDEO] – If the S-Video connection is used, select this option. [Interlaced] – For ordinary TV: turn on the interlace mode. [P-Scan] – For progressive scan TV: turn on the progressive scan mode. [Parental Control] Restricts access to discs that are unsuitable for children.
1 2 3 4 5 Program radio stations manually E n g l i sh 7 Tune to FM radio stations Note Ensure that you have connected and fully extended the supplied FM antenna. You can program a maximum of 20 preset radio stations. Press TUNER. Press and hold / . ! ! # ( change, release the button. » The FM tuner tunes to a station with strong reception automatically. 1 2 Tune to a radio station.
8 Adjust volume level and sound effect Select automatic loudness control Automatic loudness control increases the treble and bass effect at low volume levels (the higher the volume, the lower the treble and bass levels). 1 Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level. Select a sound effect To turn on automatic loudness control, press LOUD/DBB during play until the loudness icon is displayed.
» The unit turns on automatically at the set time and switches to the last selected source. Activate demonstration mode » To deactivate the alarm timer, select [OFF] (off) at step 6. E n g l i sh 9 Other features You can see an overview of all features. 1 In standby mode, press on the main unit to activate the demonstration mode. » A demonstration of major available features starts. Set the sleep timer 1 To deactivate the demonstration mode: 1 Press on the main unit again.
2 3 For audio players with headphone sockets: Connect a 3.5mm audio cable (not supplied) to the MP3 LINK socket and to the headphone socket on the audio player. 10 Product information Select the MP3 Link/AUX source. Start play on the audio player. Note Product information is subject to change without prior notice. Record to a digital recorder You can record audio from this unit to a digital recorder.
` !J Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio Sensitivity - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 87.
WMA v9 or earlier Directory nesting up to a maximum of 8 levels Number of albums/ folders: maximum 99 Number of tracks/titles: maximum 999 ID3 tag v2.0 or later File name in Unicode UTF8 (maximum length: 128 bytes) Unsupported formats: Empty albums: an empty album is an album ! ) is not be shown in the display. # $ " ; example, Word documents (.doc) or MP3 ' ! } ; # / not played.
Clean the disc. A distorted picture may appear during progressive scan setup. The aspect ratio of the TV screen cannot be changed even though you have set the TV display format. { ! # } ! DVD disc. { The aspect ratio may not be changed for some TV systems. No sound or poor sound { Adjust the volume. { Disconnect the headphones. { Check that the speakers are connected correctly. { Check if the stripped speaker wires are clamped.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. MCD122_98_UM_V3.