operation manual

17EN
9 Adjust settings
1 Press .
2 Select the [Setup] (Setup) page.
3 Select a setting and press OK.
• To return to the previous menu, press
.
• To exit the menu, press
.
General setup
On the [General] (general) page, you can set
the following options:
[Disc Lock] (disc lock)
Lock or unlock a disc.
[OSD Language] (OSD language)
Select the preferred language for on-screen
display.
[DivX(R) VOD Code] (DivX(R) VOD Code)
Display the DivX(R) registration code.
Note
•
Enter this DivX registration code when you rent or
purchase a video from http://vod.divx.com/. The DivX
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
Video setup
On the [Video] (Video) page, you can set the
following options:
[TV System] (TV System)
Change this setting if the video is not displayed
correctly. By default, this setting matches the
most common setting for TVs in your country.
• [PAL] (PAL): for TV with PAL color system.
• [Multi] (Multi): for TV that is compatible
with both PAL and NTSC.
• [NTSC] (NTSC): for TV with NTSC color
system.
[TV Display] (TV Display)
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
• [4:3 Pan Scan] (4:3 Pan Scan): for 4:3
screen TV, full-height display with the
trimmed sides.
• [4:3 Letter Box] (4:3 Letter Box): for 4:3
screen TV, wide-screen display with black
bars on the top and bottom of the screen.
• [16:9] (16:9 Wide Screen): for wide-screen
TV, display ratio 16:9.
[Progressive] (Progressive)
Set the video output according to the video
connection. If the composite connection is used,
thissettingisnotrequired.
• [On] (On): turn on progressive scan.
• [Off] (Off): turn off progressive scan.
[Picture Setting] (Picture Setting)
Selectapredenedsetofpicturecolorsettings.
• [Standard] (Standard): original color setting.
• [Bright] (Bright): vibrant color setting.
• [Soft] (Soft): soft color setting.
• [Personal] (Personal): customizes the color
setting. Set the level of brightness, contrast,
tint, and color saturation, and then press
OK.
Audio setup
On the [Audio] (Audio) page, you can set the
following options:
[Surround Mode] (Surround Mode)
• [Stereo] (Stereo)
• [LT/RT] (left/right)
[Sound Mode] (Sound Mode)
Turn off or select your preferred sound mode.
• [3D] (3D)
• [Movie Mode] (Movie Mode)
• [Music Mode] (Music Mode)
4:3 Letter Box (LB)
4:3 Pan Scan (PS)
16:9 (Wide Screen)