User's Manual

ManualsBrandsPhilips Manualshome audio setsMCD710 DVD Micro Theater

MCD710

Quick Start Guide

What’s in the Box?

You should find these items upon opening the box.

Quick Start Guide

Quick start guide

User Manual

Remote control with two

AAA batteries

FM antenna

User manual

Composite Video Cable

MCD710 QUG_Eng 2007.12.27, 16:291

Summary of content (4 pages)

PAGE 1
MCD710 Quick Start Guide What’s in the Box? You should find these items upon opening the box. Quick 1 2 Start G User Quick start guide User manual FM antenna Composite Video Cable uide MCD710 QUG_Eng 1 Man ual Remote control with two AAA batteries 2007.12.
PAGE 2
1 Connect the FM antenna. 4 Tips – See the User Manual for other TV connection options. – For connecting to a Progressive Scan TV, refer to the user manual for proper connections and detailed setup. 2 Connect the composite video to a TV. 3 Connect the power cords of the system and TV. 4 3 AC power 1 2 Speaker (right) Speaker (left) 3 1 AC power FM antenna Setting up the TV 1 Switch the DVD system on and then select DISC source. 2 Turn on the TV and set it to the correct Video In channel.
PAGE 3
Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOL +/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting.
PAGE 4
Playing a disc 1 Press ç to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROGRAM on the remote for more than two seconds to program all available stations in order of waveband.