user manual

ManualsBrandsPhilips ManualsAutomobile AccessoriesMCD716

Composite Video Cable

MCD716

Quick Start Guide

What’s in the Box?

You should find these items upon opening the box.

Quick Start Guide

Quick start guide

User Manual

Remote control with two

AAA batteries

FM antenna

User manual

Control Cable

MCD716 QUG_12_Eng 2008.1.9, 14:041

Summary of content (4 pages)

PAGE 1
MCD716 Quick Start Guide What’s in the Box? You should find these items upon opening the box. Control Cable Composite Video Cable Quick 1 Start G uide FM antenna MCD716 QUG_12_Eng Quick start guide 1 Remote control with two AAA batteries 2 User Man ual User manual 2008.1.
PAGE 2
1 Connect the speaker cables. 2 Connect the FM antenna. Tips 3 – See the User Manual for other TV connection options. – For connecting to a Progressive Scan TV, refer to the user manual for proper connections and detailed setup. Connect the control cable. 4 Connect the composite video cable to a TV. 5 Connect the power cords of the system and TV. AC power 5 FM antenna Speaker (right) 4 2 Speaker (left) 3 1 Setting up the TV 1 Press SOURCE (DISC on the remote) to select disc source.
PAGE 3
Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOL +/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting.
PAGE 4
Playing a disc 1 Press OPEN •CLOSEç (ç on the remote control) to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. OPEN•CLOSE 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press PRESET-/9 (9 on the remote). Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source.