Register your product and get support at www.philips.
1 Important Safety Environmental notices Trademark notice 2 Your MCD900 Introduction What’s in the box Overview 4 4 5 5 6 6 6 6 3 Prepare 10 Place the Soundsphere speakers 10 Install batteries into the remote control 11 4 Connect 11 Connect the main unit and CD/DVD unit 11 Connect speakers 11 Connect for disc play 11 Connect the FM antenna 12 Connect external audio devices 13 Turn on/off 13 5 Play music CDs/movie DVDs 14 14 14 14 15 15 6 Play from a USB flash device 16 16 16 16 16 7 Play FM rad
1 Important Safety Information for Europe: Know these safety symbols o This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. Please refer to disposal instructions in this user manual. Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Warning •• Never remove the casing of this apparatus.
Battery disposal information: Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Environmental notices Trademark notice This product complies with the radio interference requirements of the European Community.
2 Your MCD900 The DVD player on MCD900 supports these disc formats: Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. Introduction MCD900 can • Connect a USB flash device; • Connect the existing home audio/video systems, including TV, audio systems and MP3 players.
In FM RADIO mode: / / / Navigation buttons Press to navigate through menus. Press and hold to start the auto tuning to the next available station; Press repeatedly for fine tuning. / In USB mode: Superscroll:In a long list of options, press and hold to start Superscroll. Release to jump to the first item starting with current alphabet/ number. In DISC mode: Select an album (for MP3/WMA CDs). / OK/ Confirm selection. Start/pause/resume play. In USB: Start to play the entire file folder(SuperPlay™). 8.
Remote control a p b 3. DISC MENU c o d n 4. e 5. f m / / / /OK Navigation buttons Press to navigate through menus. / In FM RADIO mode: Press and hold to start the auto tuning to the next available station; Press repeatedly for fine tuning. OK h i j In DISC mode: Enter or exit the disc menu. FAVORITE In DISC mode: Program favorite chapters/tracks / In USB mode: Superscroll: In a long list of options, press and hold to start Superscroll.
. 10. 11. Alphanumeric buttons For text entry In FM RADIO mode: On the radio play screen, press and hold a numeric button to store current station in the location as a preset station. In USB mode: Quickjump: In a long list of options that are sorted in an alphabetical order, press once or repeatedly to select an alphabet, and jump to the first item that starts with the selected alphabet.
• • • • To enter symbols, press repeatedly. To enter space, press . To switch between lower and upper cases, press . To delete previous character, press . To delete all entries, press and hold . Tip 3 Prepare Place the Soundsphere speakers About Soundsphere speakers The supplied Soundsphere speakers can produce full-frequency sounds throughout the area of coverage. Unlike conventional speakers, Soundsphere speakers are much less sensitive to exact positioning.
• • Place the speakers 2 to 3 meters away from each other, with the two speakers and your preferred listening position forming an equilateral triangle. Place the speakers with the tweeters facing your preferred listening area. To keep the tweeters unobstructed, never place the speakers in between shelves. English • Tip •• Alternatively, you can place the Soundsphere speakers on the floor or on top of shelves, though not preferable.
• HDMI jack: for a high-definition TV compliant with HDMI (High Definition Multimedia Interface)/DVI (Digital Visual Interface), and HDCP (High-bandwidth Digital Contents Protection). Using the CVBS jack Play from another speaker system To play from another speaker system, connect an digital audio cable (not supplied) to: • the CD/DVD DIGITAL AUDIO OUT socket on MCD900; • the digital audio input on an external speaker system.
Connect external audio devices - English You can listen to an external audio device through the speakers on MCD900. To do so, do the following connections, and then, select the AUX mode on MCD900. Connect audio cables (red/white - not supplied) to: • the AUX IN L / R sockets on this unit, and • the audio output sockets on the external audio device. TV - R AUX OUT L • Connect MCD900 to the power supply. Note •• The type plate information is located at the back or at the underside of the product.
5 Play music CDs/ movie DVDs Use the disc menu After loading a disc onto the tray, you can see the disc settings on the TV screen. Caution •• Never look at the laser beam inside the unit. •• Risk of product damage! Never play discs with accessories such as disc stabilizer rings or disc treatment sheets. •• Never put any objects other than discs into the disc compartment. Note •• Ensure that you have made connections for disc play (see ‘Connect for disc play’ on page 11).
• To stop • Press . »» The disc play resumes from the last stop point. Press again. 1 In the DISC mode, ensure that the disc play stops. Press FAVORITE on the remote control. »» On the TV screen, you can see a menu for you to program desired chapters/tracks. Use the remote control to enter the desired chapters/tracks. To play the program • On the TV screen, select [Start]. To erase the program • Press ; • Or, remove the disc from the disc tray.
6 Play from a USB flash device Connect a USB flash device On MCD900, you can play music/photos stored on a USB flash device. To do so, do the following: • Connect the USB flash device to the socket on MCD900; • Select the [USB] mode on MCD900. Play from the USB flash device 1 On MCD900, ensure that the USB mass storage device is properly connected. On the remote control, press USB. »» The file sorting process may take some time. During file sorting, the file folders are displayed.
•• Alphanumeric search, Superscroll and Quickjump are available only when you enter a long sorted list of options (excluding the home screen and lists of menus). Alphanumeric search In a long list of options, Superscroll allows you to start a search in an alphabetical order. You can quickly reach the first item that starts with the selected alphabet. Press and hold / to start Superscroll. »» A pop-up text box appears.
Edit preset stations Store current station to a location When listening to a radio station, you can store current station to a desired location (0-9) in the preset list. The numeric buttons (0-9) on the remote control correspond to the locations (0-9) in the preset list. Tune to your desired station. On the radio play screen, press and hold a numeric button. • If necessary, press NOW PLAYING to return to the radio play screen. • Current station is stored to the location.
9 Settings • Play modes When playing music, you can choose to play repeatedly, play in random order, or play one by one. Select a play mode as desired. To select a play mode for music play Before or during music play, • From Home screen, go to [Settings] > [Play mode]; Or, • Press REPEAT or SHUFFLE repeatedly on the remote control. »» - Play all songs in current folder repeatedly; »» - Play current song repeatedly; »» - Play all songs in current folder randomly.
3 »» In the list of songs, the album art appears as thumbnail along with the corresponding song. Press SETTINGS on the remote control to select [Settings] > [Display settings] > [Wallpaper]. In [Wallpaper], select [Current picture]. »» Current picture is set as wallpaper. English 2 Screensaver On MCD900, the screensaver is turned on when MCD900 is switched to active standby. When turned on, the selected screensaver appears. The clock is shown on the lower right corner of the screen.
• Press and hold / , or press / repeatedly until you reach the desired digits. Press OK to confirm. • Or, enter the desired digits by using the alphanumeric buttons on the remote control. »» The alarm icon appears on the screen.
Follow Step 1-2 under “Manual setting”. In [Date and time], go to [Time format] or [Date format] to select options. Language After the first-time setup, you can change the language selection in [Settings] > [Language]. Demo mode You can view the demo to learn major functions on MCD900. From Home screen, go to [Settings] > [Demo mode]. »» Demo play starts. To exit the demo play, press . »» The unit is switched to Eco standby. 1 2 Restore factory settings You can restore MCD900 to factory settings.
HDMI 480i, 480p, 576i, 576p, 1080i, 1080p Video system PAL / NTSC Video format 4:3 / 16:9 Audio amplifier (Digital) Output power 2 x 50W (RMS) (= total power 100W) Frequency response 20Hz to 20000Hz (±0.5dB) Signal to noise ratio typically 92dB Speakers Power handling 50W (RMS) / 60W (MPO) Impedance 8Ω (Ohms) Sensitivity 86dB/ 1m/ W Dimensions Woofer: 5.00 inches Tweeter: 1.
USB port type Type A, Host Supported media FAT, FAT-32, NTFS Supported class MSC only (no MTP support) Multi-partition support No, only first readable partition Database support Up to 40000 songs Display/Clock Resolution Dotmatrix, 320 x 240 dots (QVGA), Color TFT Size 3.
Written Offer Philips Electronics Hong Kong Ltd. hereby offers to deliver, upon request, a copy of the corresponding source code for the open source software packages used in this product for which such offer is requested by the respective licenses. This offer is valid up to three years after product purchase.To obtain source code, please contact open.source@philips.com.
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it.
GNU LIBRARY GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1991 Free Software Foundation, Inc. 675 Mass Ave, Cambridge, MA 02139, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the library GPL. It is numbered 2 because it goes with version 2 of the ordinary GPL.] Preamble The licenses for most software are designed to take away your freedom to share and change it.
4.You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE,THERE IS NO WARRANTY FOR THE LIBRARY,TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
3.All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-). 4.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. MCD900_UM_12_Book wk1015.