Register your product and get support at www.philips.
Philips Consumer Lifestyle HK-1013-MCi298 2010 ........................................................ (Report No. / Numéro du Rapport) ........................................................................... (Year in which the CE mark is affixed / Année au cours de laquelle le marquage CE a été apposé) EC DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V.
1 Important Safety Environmental notices Recycling Trademark notice 2 Your MCi298 Introduction What’s in the box Overview Top and front view Rear view Remote control Touch screen Home screen Text entry on the remote control 5 5 6 7 7 8 8 8 9 9 10 11 12 12 13 3 Prepare 15 Place the unit 15 Install batteries into the remote control 15 4 Turn on/off Connect power supply Turn on/off 5 First-time setup 16 16 16 17 Connect to home network 17 Wireless connection: One-touch Wi-Fi Protected Setup (WPS) 18 Wi
10 Play from an external audio device 34 Connect external audio devices Play from an external audio device 11 Settings Sound settings Dynamic Bass Boost Equalizer Set the volume from the external audio device Incredible Surround Display settings Brightness Clock settings Alarm Date and time Network settings Setup network Location and time zone Language Device information Check for software upgrades Restore factory settings 34 34 35 35 35 35 35 35 35 35 35 35 36 37 37 37 37 38 38 38 12 Register MCi298 wit
Safety Information for Europe: Know these safety symbols i Only use this product indoors. Do not expose the product to dripping / splashing water, rain or high humidity. English 1 Important j Keep this product away from direct k Do not install near any heat sources such as radiators, heat registers, stoves, or other electrical equipment (including l Do not place any other electrical equipment on the product. m Do not place any sources of danger on the product (e.g.
Note The type plate information is located at the back or at the underside of the product. Risk of overheating! Never install this & ' a space of at least four inches around this apparatus for ventilation. Ensure curtains or other objects never cover the ventilation slots on this apparatus. Listen at reasonable volumes for reasonable periods of time. Be careful not to adjust the volume as your hearing adapts.
Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
2 Your MCi298 Congratulations on your purchase, and ? @ " support that Philips offers, register your product at www.philips.com/welcome. Introduction MCi298 can Connect to the existing home network, which can consist of computers and UPnP devices; Connect the existing home audio systems and portable media players; Connect a USB mass storage device.
English Overview Top and front view h i g f e d c b a 1. Press to turn on the set; To turn off, press to switch to active standby; or, press and hold to switch to Eco standby. Exit Demo mode. 2. 3. 4. 5. 6. 7. 8. 9. Wi-Fi antenna Eject the disc. Disc slot USB port for the USB mass storage device Mute/ unmute sound. VOLUME Increase/decrease volume.
Rear view a bc d e 1. DC IN for power cord MP3-LINK 3.5mm audio input jack for a portable media player to play through the speakers on MCi298 2. 3. 3.5 mm headphone jack DEMO for the use by dealers only ETHERNET for the Ethernet cable that connects MCi298 with home network, if you want a wired connection to the home network FM ANTENNA for the supplied FM antenna 4. 5. 6.
a b o c 4. d n e f g m h i j l FAVORITE In [Internet Radio] mode: Add current station to the list of Favorite Stations. In [FM radio] mode: On the play screen, press to add current station to [Presets]. / / ( )/ ( ) Navigation buttons Press to navigate through menus. / In DISC mode: Select an album (for MP3/WMA CDs). ( )/ ( ) Search buttons on the play screen In [Media Library]/[USB]/DISC mode: Press to skip to the previous/ next track.
Press to switch between lower and upper cases; In FM RADIO mode, press in the list of presets to start editing station name. SOUND Select sound settings. REPEAT Toggle through repeat play options. SHUFFLE Activate/deactivate random order play. 11. 12. Home screen 13. Mute/ unmute sound. 14. BACK: Go back to previous screen. Touch screen MCi298 is equipped with a touch screen.
On Home screen, tap on / to navigate through icons. Tap on the corresponding icon to select. Or, press / /OK on the remote control to select the desired source. English To go back to previous screen Press BACK. To return to Home screen Press HOME. To enter symbols, press repeatedly. To enter space, press . To switch between lower and upper cases, press . To delete previous character, press . To delete all entries, press and hold .
EN
Place the unit You can mount MCi298 on a wall, or put MCi298 on a surface. Install batteries into the remote control English 3 Prepare Caution Risk of explosion! Keep batteries away from Z ' " Risk of decreased battery life! Never mix different brands or types of batteries. Risk of product damage! When the remote control is not used for long periods, remove the batteries. a Open the battery compartment.
4 Turn on/off The power indicator lights up red; Clock time is displayed if you have set clock. Connect power supply Warning Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the product. And, the unit is still connected to the Wi-Fi/ wired network. Auto active standby If no activity happens on MCi298 for 10 minutes, MCi298 can switch to active standby automatically. Eco standby Connect MCi298 to the power supply.
English 5 First-time setup $ % &') 1 Select the desired language on the screen as prompted. 2 Select your location and time zone from the list as prompted. 3 Select [Yes], when asked whether to set up network connection. Connect to home network Connect wirelessly MCi298 Connect through an Ethernet cable MCi298 You can connect MCi298 to home network in different ways, wireless or wired.
Use a router (or Access Point) for home network. That is, connect computers/ devices to a router. Connect MCi298 to the router wirelessly or through an Ethernet cable. To have the unit connected to the Internet over home network, ensure that the router connects to the Internet directly and no dial-up is required on the computer. To switch between different connection methods, or switch between different routers, go to [Settings] > [Network settings] > [Setup network].
?^Z \? ^ Z " ] as the setup method: On MCi298, select =< !< * > > =+ !<+; ? +GJ >, and write down the PIN that is displayed on MCi298; On the router, enter the PIN. Consult the user manual of the router to learn how to enter the PIN the router. Wireless connection: Enter encryption key manually MCi298 Connect to the Internet Connect to the Internet as prompted. » _ ` X time setup is complete.
Successfully connected to Network A Network A Network B Network C 3 4 Select the desired Wi-Fi network. Note As prompted, enter the encryption key to the network. » The unit starts to acquire an IP address assigned by the Wi-Fi network automatically. » A message appears when the connection is completed successfully. The router may fail to assign an IP address, >`V? \> ` V # Protocol) is unavailable or disabled on the router.
English MCi298 12V=1A To Modem LAN4 LAN3 LAN2 LAN1 Reset Internet Tip Connect to the home network On the unit, select =< !Q >. » The unit starts to acquire an IP address assigned by the network automatically. Ensure that the router connects to the Internet directly and no dial-up is required on the computer. » A message appears when the connection is completed successfully. 2/2 Wireless (WiFi) Wired (Ethernet) Tip The router may fail to assign an IP address, >`V? \>
6 Play from home Wi-Fi/wired network Tip By default, preset stations are pre-loaded to MCi298 according to the location that you # X or change the location, go to [Settings] > [Location and time zone]. Store preset stations Play Internet radio stations To play Internet radio stations, ensure that MCi298 is connected to the Internet over the home network. Tip Ensure that the router connects to the Internet directly and no dial-up is required on the computer.
To add a station to [Favorite stations] On a list of stations, select the desired station. Press FAVORITE on the remote control. Or, play the desired station. On the play screen, press FAVORITE on the remote control. » A message appears, indicating that the station is added to [Favorite stations]. English To remove a station from [Favorite stations] Select the station in the list of stations; or, go to the play screen of the station. Press FAVORITE again.
Manage Internet radio online MCi298 Internet http://www.philips.com/welcome By registering MCi298 on www.philips.com/ welcome (see ‘Register MCi298 with Philips’ on page 39), you can log in to Club Philips. On Club Philips, you can do the following to manage the Internet Radio on a computer: Edit favorite stations; Manually add stations that you are unable *V { | Edit favorite stations online Through Club Philips, you can manage the list of favorite stations on a computer.
Under [Favorite], check the box corresponding to the station. » The station is marked as favorite. To unmark, uncheck the box corresponding to a station. Tip In the list of favorite stations, to put a favorite " $ # To put a station behind the last one, make the station just ahead of the last one; drag and drop the last station upward.
4 Click [Save]. » A station is manually added the below the edit boxes. To edit an added station 26 As shown, click the station. » " # the information about the station. Click on the text boxes to edit the information.
English Stream from a UPnP server MCi298 You can stream music from computers or Network-attached storage(NAS) to MCi298, when MCi298 is connected to home network; Music sharing is set up on the computers that are also connected to the home network, if you want to stream music from the computers; The NAS is connected to the home network and can work as *UPnP media server, if you want to stream music from the NAS.
On computers: Set up music sharing 1 On the computer, insert the supplied software CD. 2 Install the software by following screen instructions. Media Browser (on a PC) TwonkyMedia Server (on a MAC) » Now, the computer can work as a music server. You can stream music from the computer to a UPnP device on the home Wi-Fi/ wired network. Library on the computer or NAS 1 Ensure that the UPnP server is connected to the home network. 2 On MCi298, tap [Media Library] on Home screen.
Select options by tapping on corresponding buttons: : Tap to scroll upward; : Tap to scroll downward; : Tap to go back to previous screen. Tap on an option to select.
7 Play from a USB mass storage device Connect a USB mass storage device On MCi298, you can play music stored on a USB mass storage device. To do so, do the following: Connect the USB mass storage device to the socket on MCi298; Tap on [USB] on the Home screen of MCi298. Play from the USB mass storage device 1 On MCi298, ensure that the USB mass storage device is properly connected. 2 On Home screen, tap on [USB]. Or, on Home screen, press / and OK on remote control.
Caution Never look at the laser beam inside the unit. Risk of product damage! Never play discs with accessories such as disc stabilizer rings or disc treatment sheets. Never put any objects other than discs into the disc compartment. Press / repeatedly to select *&*? CD-R/RW, press / folder. Press / to search forward/ backward. Press to pause or resume. Press to stop.
Use the touch screen during CD play On the CD play screen, Tap on the screen to show functional buttons; Select play options by tapping on corresponding buttons: / : Tap to pause or play current song; / : Tap to select previous/next song; : Tap to play all songs in current folder randomly; : Tap to play all songs in current folder repeatedly; : Tap to return to the previous screen.
Edit preset stations English 9 Play FM radio Edit station information Tune to FM radio stations Note For optimal reception, fully extend and adjust the position of the antenna. 1 In the FM RADIO mode, press FAVORITE on the radio play screen. 2 In the list of preset stations, Select the station to be edited; Press a/A to start editing; Press / to select the entry location; press / repeatedly to select desired letters. 3 Press OK ? BACK to discard the changes.
10 Play from an external audio device MCi298 allows you to play an external audio device (e.g. a portable media player, another audio system) through the speakers of MCi298. Connect external audio devices You can listen to an external audio device through the speakers on MCi298. To do so, do the following connections, and then, select the [MP3 link] mode on MCi298. To play from a portable media player with 3.
Sound settings On MCi298, you can select different sound settings in [Settings] > [Sound settings]. 1 From Home screen, go to [Settings] > [Sound settings]. 2 Select the option. Press OK to turn it on or off. Or, tap on the check box to select/ deselect. Or, On the remote control, press SOUND to enter the menu of sound settings. In [Settings] > [Sound settings] > [Equalizer], Select the equalizer settings: [Rock], [Pop], [Jazz].
2 From Home screen, go to [Settings] > [Clock settings] >[Alarm]. 3 To set the alarm time, Press and hold / , or press / repeatedly until you reach the desired digits. Press / to select the entry location. Press OK to Or, enter the desired digits by pressing the numeric buttons. » The alarm icon appears on the screen. Use the alarm At the set alarm time, the buzzer sounds. Note The alarm sounds even if you have switched MCi298 to active standby or Eco standby.
Manual setting Network settings Turn on the unit, if necessary. From Home screen, select [Settings] > [Clock settings] >[Date and time]. Setup network 3 In [Date and time], select [Current date and time] > [Manual]. 4 To enter date and time, Press or to select the entry location; Enter the desired digits by pressing the numeric buttons; Tap on OK You can also press or repeatedly, or press and hold or until the desired digit appears.
Device information Restore factory settings From the home screen, go to [Settings] > [Information]. You can learn about information about MCi298, including model number, name to be shown on a UPnP server/client, product registration ID, software version and network settings. You can restore MCi298 to factory settings. The factory settings are restored and your own settings are cleared, including the settings of network, sound, display, clock, alarm and language.
the packaging box or product label (e.g. MCi298). English 12 Register MCi298 with Philips @ By registering MCi298 on www.philips.com/ welcome, you can Manage your own favorite radio stations; Receive Streamium newsletters. To get the product registration ID Note Registration of MCi298 requires a valid email address. On MCi298, go to [Settings] > [Information]. Press repeatedly to [Product Registration ID].
Unregister MCi298 When registering with www.philips.com/ welcome, you can only use one account for one unit (e.g. MCi298). For each account, you can maintain a set of favorite stations and manually added stations. To use another account for registration, you need to unregister current one. To unregister an account 1 On MCi298, select [Settings] > [User registration] >[Unregister]. 2 & unregistering the account.
English 13 Maintenance This chapter tells you how to care for MCi298. Cleaning Note Avoid moisture and abrasion. 1 Clean MCi298 only with a soft dry cloth.
14 Technical data General ^% + ` !^%#Z% ` 100V~240V 50Hz/60Hz (for /12, /05 /79) Dimensions Main unit: 542.2 x 105.2 x 236.7mm < ! 3.25kg ± 0.1kg ^ !Z Output power 2 x 10W (RMS) (= total power 20W) Frequency response 50Hz to 18000Hz (±3dB) Signal to noise ratio typically 72dBA Speakers ^ { !| < 40W (according to IEC60065) !^ { ; < 15W Q%| !+ { ; < 1W Power handling 10W (RMS) Impedance \= ] Sensitivity 86dB/ 1m/ W Dimensions 3 inches Fre
Wireless standard 802.11b/ g Wireless security WEP (64 or 128 bit), WPA / WPA2 (8-63 characters) Frequency range 2412 - 2462 MHz (CH1-CH11) (for /79, /37, /55, /97) 2412 - 2472 MHz (CH1-CH13) (for /12, /05) Antenna 1 x internal / 1 x external, diversity mode enabled < !<+; Yes (PBC + PIN) Network mode support Infrastructure < !^J Q Wired standard 802.3 / 802.
USB Note USB port type Type A, Host Supported media FAT, FAT-32 Supported class MSC only (no MTP support) Multi-partition support Z " Database support Up to 1000 songs Display/Clock Resolution 320 x 240 dots (QVGA), Color TFT Size 3.
English 15 Troubleshooting I cannot hear any sound or the sound is poor, what do I do? Press + VOL - to increase the volume. Press the MUTE button again to reactivate the sound output. Is there a maximum distance of transmission between a wireless router and MCi298 for effective streaming? Yes. The maximum distance of Wi-Fi transmission is 250m measured in open spaces.
Streamium terms and conditions Terms and Conditions of Use of your Philips Streamium-enabled Device % + ; # Z { !Z { $ $ Conditions of Use give you the rights to use certain features on your Device relating to the streaming of content. You must agree to these Terms and Conditions of Use before using the Device.
authorization is necessary, it is your responsibility to obtain any such license or authorization. You agree that you are solely liable for any damages you may incur resulting from your failure to obtain the proper license or authorization for use of the content accessible through the Device. You agree that Philips will have no liability to you with regard to your use of the content.
NOTICE SOFTWARE END USER LICENSE AGREEMENT $}G; ;|*$<^XQ QJZ ;QX G%QJ;Q ^XQQ QJ$ !$}G; ^XQQ QJ$ G; ^ Q^ ^JZ @GJZGJ AGREEMENT BETWEEN YOU (QG$}QX ^J GJZGGZ^ |X QJ$G$ ^JZ +}GG+; %|J; QX ELECTRONICS B.V.
ability to play unprotected content. A list of revoked WM-DRM Software is sent to your PC and/or your Device whenever you download a license for Secure Content. Microsoft may, in conjunction with such license, also download revocation lists onto your Device on behalf of Secure Content Owners, which may disable your Device’s ability to copy, store, display, transfer, and/or play Secure Content.
meet the warranty set forth herein and that is returned to Philips with a copy of your receipt. This limited warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongful application. Any replacement Software will be warranted for the remainder of the original warranty period or ! ` { $ ` ; ` ` provided to you free of charge on an evaluation only basis. 10.
Written Offer This product contains the following open source software packages, which are subject to their respective licenses. Philips hereby offers to deliver, upon request, a copy of the corresponding source code for the packages for which such offer is requested. This offer is valid up to three years after the product is purchased or firmware is downloaded. Please contact open.source@philips.com.
Linus Torvalds ---------------------------------------GPL V2 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.
Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc.
you distribute copies of the library, or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link a program with the library, you must provide complete object files to the recipients so that they can relink them with the library, after making changes to the library and recompiling it.
GNU LIBRARY GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Library General Public License (also called "this License"). Each licensee is addressed as "you".
(For example, a function in a library to compute square roots has a purpose that is entirely well defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole.
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work.
together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.
copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Library General Public License from time to time.
each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
library. If you use our work, you ought to acknowledge us. Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's software". We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are assumed by the product vendor.
Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
Open Source Initiative. Glenn Randers-Pehrson glennrp at users.sourceforge.net January 3, 2010 ---------------------------------------OpenSSL 0.9.8b , licensed under both OpenSSL License and Original SSLeay license, OpenSSL License --------------/* ============================================================= * Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
OF THE POSSIBILITY OF SUCH DAMAGE. * ============================================================= ======= * * This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). */ Original SSLeay License ----------------------/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] */ ---------------------------------------FreeType V2
Portions of this software are copyright ? The FreeType Project (www.freetype.org). All rights reserved. """ Please replace with the value from the FreeType version you actually use. Legal Terms =========== 0.
unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us. 3. Advertising -------------Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission.
DISCLAIMED.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. MCi298_12_UM_EN_wk1129.
