Register your product and get support at www.philips.
Philips Consumer Lifestyle HK-1014-MCi730 2010 ........................................................ (Report No. / Numéro du Rapport) ........................................................................... (Year in which the CE mark is affixed / Année au cours de laquelle le marquage CE a été apposé) EC DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V.
1 Important Safety-Important notes for users in the U.K.
Display settings Brightness Clock settings Alarm Date and time Network settings Setup network Location and time zone Language Device information Check for software upgrades Restore factory settings 35 35 35 35 36 37 37 37 37 38 38 38 12 Register MCi730 with Philips 39 39 39 39 39 40 40 Benefits Register MCi730 Register on the web site Register on the device Unregister MCi730 Check registration information 13 Maintenance Cleaning 41 41 14 Technical data 42 15 Troubleshooting 45 4 EN
Safety-Important notes for users in the U.K. Safety Information for Europe: Know these safety symbols English 1 Important Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: a Remove fuse cover and fuse. b Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type. c Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
n This product may include batteries. Please refer to safety and disposal instructions for batteries in this user manual. o This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. Please refer to disposal instructions in this user manual. Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Information about the use of batteries: English Class II equipment symbol: Caution • Risk of leakage: Only use the specified type of This symbol indicates that this product has a double insulation system. This apparatus includes this label: batteries. Do not mix new and used batteries. Do not mix different brands of batteries. Observe correct polarity. Remove batteries from products that are not in use for a longer period of time. Store batteries in a dry place.
2 Your MCi730 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction MCi730 can • Connect to the existing home network, which can consist of computers and UPnP devices; • Connect the existing home audio systems and portable media players; • Connect a USB mass storage device.
English Overview Top and front view i j h g a f b e c d 5. 1. 2. 3. 4. Press to turn on the set; To turn off, press to switch to active standby; or, press and hold to switch to Eco standby. Exit Demo mode. Disc compartment USB port for the USB mass storage device MP3-LINK 3.5mm audio input jack for a portable media player to play through the speakers on MCi730 6. 3.5mm headphone jack VOLUME Turn the knob to adjust the volume. 7. 8. 9. 10. Open or close the disc compartment.
Rear view c d b e f a see ‘Connect’ on page 16 1. ~ AC IN for AC power cord AUX IN R / L Audio input sockets for an external audio device to play through the speakers on MCi730 DEMO for the use by dealers only ETHERNET for the Ethernet cable that connects MCi730 with home network, if you want a wired connection to the home network FM antenna LOUDSPEAKERS for connection cables that connect the supplied speakers 2. 3. 4. 5. 6.
Press to turn on the unit; To turn off, press to switch to active standby; or, press and hold to switch to Eco standby. Exit Demo mode. a b o c 2. 3. d n m e f g 4. h i j l k Open or close the disc compartment. FAVORITE In [Internet Radio] mode: Add current station to the list of Favorite Stations. In [FM radio] mode: On the play screen, press to add current station to [Presets]. / / ( )/ ( ) Navigation buttons Press to navigate through menus. / In DISC mode: Select an album (for MP3/WMA CDs).
8. VOL Increase/decrease the volume Alphanumeric buttons For text entry CLEAR Press to delete the previous entry; Press and hold to delete all entries. a/A Press to switch between lower and upper cases; In FM RADIO mode, press in the list of presets to start editing station name. SOUND Select sound settings. REPEAT Toggle through repeat play options. SHUFFLE Activate/deactivate random order play. 9. 10. 11. 12. 13. Mute/ unmute sound. 14. BACK: Go back to previous screen.
• On Home screen, tap on / to navigate through icons. Tap on the corresponding icon to select. • Or, press / /OK on the remote control to select the desired source. To go back to previous screen • Press BACK. To return to Home screen • Press HOME. On MCi730, you enter Home screen after the first-time setup is complete. To select a music source, or enterthe[Settings]menu Text entry on the remote control To enter text and symbols, press corresponding alphanumeric buttons on the remote control.
• To enter symbols, press repeatedly. • To enter space, press • To switch between lower and upper cases, press . • To delete previous character, press To delete all entries, press and hold . Tip • For languages other than English, letters that an alphanumeric button corresponds to may vary. 14 EN . .
English 3 Prepare Install batteries into the remote control Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of decreased battery life! Never mix different brands or types of batteries. • Risk of product damage! When the remote control is not used for long periods, remove the batteries. a Open the battery compartment. b Insert 2 AAA R03 batteries with correct polarity (+/-) as indicated. c Close the battery compartment.
4 Connect Connect speakers 1 2 On MCi730, ensure that you connect the left speaker to LOUDSPEAKERS L+, L- and right speaker to LOUDSPEAKERS R+, R-. To connect the speakers, • As shown, unscrew to loosen the connectors; • Fully insert the ends of speaker wires, red end into the red connector, and silver end into the black connector; • Screw the connectors until the speaker wires are securely fastened.
Connect power supply Warning • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the product. Active standby When in active standby, some major functions of MCi730 remain in the normal state of power consumption, e.g. Wi-Fi connection, clock display. Thus, MCi730 can quickly go to the running state when you switch MCi730 from active standby to on.
5 First-time setup The first time you turn on MCi730, 1 Select the desired language on the screen as prompted. 2 Select your location and time zone from the list as prompted. 3 Select [Yes], when asked whether to set up network connection.
English You can connect MCi730 to home network in different ways, wireless or wired. • Use a router (or Access Point) for home network. That is, connect computers/ devices to a router. • Connect MCi730 to the router wirelessly or through an Ethernet cable. Push button (WPS... • To have the unit connected to the Internet over home network, ensure that the router connects to the Internet directly and no dial-up is required on the computer.
Tip Tip • To use PIN (Personal Identification Number) as the setup method: On MCi730, select [Wireless (WiFi)] > [Pin entry (WPS – PIN)], and write down the PIN that is displayed on MCi730; On the router, enter the PIN. • Consult the user manual of the router to learn how to enter the PIN the router. Connect to the Internet • Connect to the Internet as prompted. » You enter Home screen after the firsttime setup is complete.
Select the desired Wi-Fi network. As prompted, enter the encryption key to the network. » The unit starts to acquire an IP address assigned by the Wi-Fi network automatically. » A message appears when the connection is completed successfully. Wired connection English 3 4 MCi730 Connect to the router by using the Ethernet cable 1 Select [Yes], when asked whether to set up network connection (see ‘First-time setup’ on page 18). 2 Use an Ethernet cable to connect the unit to the router.
2/2 Wireless (WiFi) Wired (Ethernet) Tip • The router may fail to assign an IP address, if the DHCP (Dynamic Host Configuration Protocol) is unavailable or disabled on the router. Connect to the Internet • Connect to the Internet as prompted. » You enter Home screen after the first-time setup is complete. MCi730 Internet Tip • Ensure that the router connects to the Internet directly and no dial-up is required on the computer.
Tip English 6 Play from home network • By default, preset stations are pre-loaded to MCi730 according to the location that you select during the first-time setup. To check or change the location, go to [Settings] > [Location and time zone]. Play Internet radio stations To play Internet radio stations, ensure that • MCi730 is connected to the Internet over the home network. Tip • Ensure that the router connects to the Internet directly and no dial-up is required on the computer.
Manage Internet radio online MCi730 Internet http://www.philips.com/welcome By registering MCi730 (see ‘Register MCi730 with Philips’ on page 39)on www.philips. com/welcome, you can log in to Club Philips. On Club Philips, you can do the following to manage the Internet Radio on a computer: • Edit favorite stations; • Manually add stations that you are unable to find on MCi730. Edit favorite stations online Through Club Philips, you can manage the list of favorite stations on a computer.
Under [Favorite], check the box corresponding to the station. » The station is marked as favorite. • To unmark, uncheck the box corresponding to a station. Tip • In the list of favorite stations, to put a favorite station ahead of the first one, make the station just behind the first one; drag and drop the first station downward. • To put a station behind the last one, make the station just ahead of the last one; drag and drop the last station upward.
4 Click [Save]. » A station is manually added the below the edit boxes. To edit an added station 26 • As shown, click the station. » The text boxes are filled, showing the information about the station. • Click on the text boxes to edit the information.
English Stream from a computer or Network-attached storage (NAS) MCi730 You can stream music from computers or Network-attached storage(NAS) to MCi730, when • MCi730 is connected to home network; • Music sharing is set up on the computers that are also connected to the home network, if you want to stream music from the computers; • The NAS is connected to the home network and can work as *UPnP media server, if you want to stream music from the NAS.
On computers: Set up music sharing Stream from the computer or NAS On MCi730, play music libraries that are streamed from a UPnP server (a computer on the home network). 1 2 On the computer, insert the supplied software CD. 1 Ensure that the UPnP server is connected to the home network. 2 On MCi730, tap [Media Library] on Home screen. Install the software by following screen instructions. • Media Browser (on a PC) • TwonkyMedia Server (on a MAC) » Now, the computer can work as a music server.
/ : Tap to pause or play current song; • Tap on the screen to show functional buttons; • Select options by tapping on corresponding buttons: : Tap to scroll upward; : Tap to scroll downward; : Tap to go back to previous screen. • Tap on an option to select. / : Tap for fast forwarding/rewinding within current song; English On the list of options, : Tap to play all songs in current folder repeatedly; : Tap to play all songs in current folder randomly. : Tap to return to the previous screen.
7 Play from a USB mass storage device » Audio files are displayed under different categories (e.g. Artist, Album, Genre), if meta/ID3 tags are edited for the files. 3 4 • Connect the USB mass storage device to the socket on MCi730; • Tap on [USB] on the Home screen of MCi730. Play from the USB mass storage device 1 On MCi730, ensure that the USB mass storage device is properly connected. 2 On Home screen, tap on [USB]. • 30 EN Or, on Home screen, press / and OK on remote control.
3 4 Press During disc play, • Press / repeatedly to select a track. For WMA/MP3 files on a CD-R/RW, press / to select a file folder. • Press • Press Caution • Never look at the laser beam inside the unit. • Risk of product damage! Never play discs with accessories such as disc stabilizer rings or disc treatment sheets. • Never put any objects other than discs into the disc compartment. to start play. to pause or resume. to stop.
Use the touch screen during CD play On the CD play screen, • Tap on the screen to show functional buttons; • Select play options by tapping on corresponding buttons: / : Tap to pause or play current song; / : Tap to select previous/next song; : Tap to play all songs in current folder randomly; : Tap to play all songs in current folder repeatedly; : Tap to return to the previous screen.
3 Press / repeatedly for fine tuning. English 9 Play FM radio Edit preset stations Tune to FM radio stations Edit station information 1 In the FM RADIO mode, press FAVORITE on the radio play screen. 2 In the list of preset stations, 3 • Select the station to be edited; • Press a/A to start editing; • Press / to select the entry location; press / repeatedly to select desired letters. Press OK to confirm. Press BACK to discard the changes.
10 Play from an external audio device MCi730 allows you to play an external audio device (e.g. a portable media player, another audio system) through the speakers of MCi730. Play from a portable media player 1 2 Ensure that the portable media player is properly connected (see ‘Connect external audio devices’ on page 16) to MCi730. On MCi730, select the [MP3 link] mode. • 3 On Home screen, tap [MP3 link]. On the portable media player, start music play.
Sound settings Equalizer [Equalizer] provides predefined sound settings for different music styles. • On MCi730, you can select different sound settings in [Settings] > [Sound settings]. 1 From Home screen, go to [Settings] > [Sound settings]. 2 Select the option. Press OK to turn it on or off. • Or, tap on the check box to select/ deselect. In [Settings] > [Sound settings] > [Equalizer], Select the equalizer settings: [Rock], [Pop], [Jazz].
3 To set the alarm time, • • Date and time Press and hold / , or press / repeatedly until you reach the desired digits. Press / to select the entry location. Press OK to confirm. The date and time can be set automatically or manually. Or, enter the desired digits by pressing the numeric buttons. » The alarm icon appears on the screen. For automatic clock setting, use the online service over the Internet.
Manual setting Network settings Turn on the unit, if necessary. From Home screen, select [Settings] > [Clock settings] >[Date and time]. Setup network 3 In [Date and time], select [Current date and time] > [Manual]. After the first-time setup, you can change how MCi730 connectsto home network: 4 To enter date and time, • Press or location; • Enter the desired digits by pressing the numeric buttons; • Tap on OK to confirm.
Device information Restore factory settings From the home screen, go to [Settings] > [Information]. You can learn about information about MCi730, including model number, name to be shown on a UPnP server/client, product registration ID, software version and network settings. You can restore MCi730 to factory settings. The factory settings are restored and your own settings are cleared, including the settings of network, sound, display, clock, alarm and language.
To get the product model number • Look at the packaging box of the device or the product label. You can always find the model number on the packaging box or product label (e.g. MCi730). Benefits By registering MCi730 on www.philips.com/ welcome, you can • Manage your own favorite radio stations; • Receive Streamium newsletters. Note • Registration of MCi730 requires a valid email address.
Tip • To log in to Philips online services later, use the web site link in the email, and the password. Unregister MCi730 When registering with www.philips.com/ welcome, you can only use one account for one unit (e.g. MCi730). For each account, you can maintain a set of favorite stations and manually added stations. To use another account for registration, you need to unregister current one. To unregister an account 1 On MCi730, select [Settings] > [User registration] >[Unregister].
English 13 Maintenance This chapter tells you how to care for MCi730. Cleaning Note • Avoid moisture and abrasion. 1 Clean MCi730 only with a soft dry cloth.
14 Technical data General AC Power (Main unit) 230V ±10%, 50Hz (for /12, /05 /79) Dimensions Main unit: 247 x 279 x 172.6mm (including LCD) Speaker box: 160.6 x 233 x 260.8 mm Weight (net) 8.6kg (all items) Power consumption Active (On) < 50W (according to IEC60065) (Active) Standby < 15W ECO (Passive) Standby < 1W Audio inputs Aux in (Line in) 2x Cinch Input impedance > 10kΩ (Ohms) MP3 link input 0.5 V RMS 20 kΩ (Ohms) Audio outputs Headphones 1 x 3.
Wireless standard 802.11b/ g Wireless security WEP (64 or 128 bit), WPA / WPA2 (8-63 characters) Frequency range 2412 - 2462 MHz (CH1-CH11) (for /79, /37, /55, /97) 2412 - 2472 MHz (CH1-CH13) (for /12, /05) Antenna 1 x internal / 1 x external, diversity mode enabled Wireless protected setup (WPS) Yes (PBC + PIN) Network mode support Infrastructure Wired (LAN / Ethernet) Wired standard 802.3 / 802.
USB USB port type Type A, Host Supported media FAT, FAT-32 Supported class MSC only (no MTP support) Multi-partition support No, only first readable partition Database support Up to 1000 songs Display/Clock Resolution 320 x 240 dots (QVGA), Color TFT Size 3.
English 15 Troubleshooting I cannot hear any sound or the sound is poor, what do I do? • Press + VOL - to increase the volume. • Press the MUTE button again to reactivate the sound output. Is there a maximum distance of transmission between a wireless router and MCi730 for effective streaming? Yes. The maximum distance of Wi-Fi transmission is 250m measured in open spaces.
Streamium terms and conditions Terms and Conditions of Use of your Philips Streamium-enabled Device Congratulations on your purchase of a Philips Streamium-enabled Device (“Device”). These Terms and Conditions of Use give you the rights to use certain features on your Device relating to the streaming of content. You must agree to these Terms and Conditions of Use before using the Device.
authorization is necessary, it is your responsibility to obtain any such license or authorization. You agree that you are solely liable for any damages you may incur resulting from your failure to obtain the proper license or authorization for use of the content accessible through the Device. You agree that Philips will have no liability to you with regard to your use of the content.
NOTICE SOFTWARE END USER LICENSE AGREEMENT THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDING AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMER ELECTRONICS B.V. A DUTCH LIMITED LIABILITY COMPANY, WITH ITS PRINCIPAL OFFICE AT GLASLAAN 2, 5616 LW EINDHOVEN, THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY “PHILIPS”).
ability to play unprotected content. A list of revoked WM-DRM Software is sent to your PC and/or your Device whenever you download a license for Secure Content. Microsoft may, in conjunction with such license, also download revocation lists onto your Device on behalf of Secure Content Owners, which may disable your Device’s ability to copy, store, display, transfer, and/or play Secure Content.
meet the warranty set forth herein and that is returned to Philips with a copy of your receipt. This limited warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongful application. Any replacement Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. This limited warranty shall not apply to you if theif the Software was provided to you free of charge on an evaluation only basis. 10.
Written Offer This product contains the following open source software packages, which are subject to their respective licenses. Philips hereby offers to deliver, upon request, a copy of the corresponding source code for the packages for which such offer is requested. This offer is valid up to three years after the product is purchased or firmware is downloaded. Please contact open.source@philips.com.
Linus Torvalds ---------------------------------------GPL V2 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.
Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.
you distribute copies of the library, or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link a program with the library, you must provide complete object files to the recipients so that they can relink them with the library, after making changes to the library and recompiling it.
GNU LIBRARY GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Library General Public License (also called "this License"). Each licensee is addressed as "you".
(For example, a function in a library to compute square roots has a purpose that is entirely welldefined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole.
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work.
together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.
copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Library General Public License from time to time.
each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
library. If you use our work, you ought to acknowledge us. Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's software". We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are assumed by the product vendor.
Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
Open Source Initiative. Glenn Randers-Pehrson glennrp at users.sourceforge.net January 3, 2010 ---------------------------------------OpenSSL 0.9.8b , licensed under both OpenSSL License and Original SSLeay license, OpenSSL License --------------/* ============================================================= * Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
OF THE POSSIBILITY OF SUCH DAMAGE. * ============================================================= ======= * * This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). */ Original SSLeay License ----------------------/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] */ ---------------------------------------FreeType V2
Portions of this software are copyright ? The FreeType Project (www.freetype.org). All rights reserved. """ Please replace with the value from the FreeType version you actually use. Legal Terms =========== 0.
unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us. 3. Advertising -------------Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission.
DISCLAIMED.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. MCi730_12_UM_EN_wk1038.