User manual

11
Connect power
Caution
Risk of product damage! Ensure that the power •
supply voltage corresponds to the voltage printed on
the back or the underside of the apparatus.
Risk of electric shock! When you unplug the AC •
power cord, always pull the plug from the socket.
Never pull the cord.
Before connecting the AC power cord, ensure you •
have completed all other connections.
1 Connect the power adapter to
the • DC IN jack on the rear of the
main unit
the power socket.•
Install remote control batteries
Caution
Risk of explosion! Keep batteries away from heat, •
sunshine or fire. Never discard batteries in fire.
Risk of decreased battery life! Never mix different •
brands or types of batteries.
Risk of product damage! When the remote control is •
not used for long periods, remove the batteries.
1 Open the battery compartment.
2 Insert 2 UM-4 AAA batteries with
correct polarity (+/-) as indicated.
3 Get started
Caution
Use of controls or adjustments or performance •
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
Ensure that the colors of the speaker wires and •
terminals are matched.
1 Hold down the socket flap.
2 Insert the stripped part of the wire
completely.
Insert the right speaker wires to “• R”,
left speaker wires to “L”.
Insert the red/blue wires to “• +”,
black wires to “-”.
3 Release the socket flap.
English
EN