User Manual

Version: V039
Benefits of the Software Update: Solved the problem that the alarm clock does not work in ECO
Power mode
.
Software Update Procedure:
IMPORTANT:
DO NOT disconnect the device from the power supply during the firmware update.
1. ClicktheDownloadbuttontodownloadthefirmwarepackageonyourcomputer.
2.
Unzipthefirmwarepackage,youwillget2files.
3.
CopythesetwofilesintoanemptyUSBstick.Note:DONOTrenameeitherofthe2filesto
avoidupgradefailure
.
4. Connect the USB stick to your device.
5. Turn on your device.
6. Select USB as the source. The message "READING" will appear on the screen of the device and the upgrade
will start after 4 times of beeping sound. After about 2 minutes you will hear continuous beeping sound when
the upgrade is completed.
7. Disconnect the USB stick from the device.
Software Update History:
N/A