Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 Safety Notice 2 2 2 Your Micro Music System 4 3 Get started 7 4 Play 9 Introduction What's in the box Overview of the main unit Overview of the remote control Connect speakers Connect power Prepare the remote control Demonstrate the features Power on Set the clock Select a source Play from disc Play from USB Control play Skip tracks Program tracks 4 4 5 6 7 Other features 12 8 Product information 14 9 Troubleshooting 15 Set the alarm timer Set the sleep timer Liste
1 Important • • Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! • Never remove the casing of the product. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately.
Compliance This product complies with the radio interference requirements of the European Community. This apparatus includes this label: Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, USB devices, and other external devices; • listen to radio stations.
Overview of the main unit h a b g c f d e a • • Turn on the product. Switch to standby mode or ECO power standby mode. • Start or pause play. • • Stop play. Erase a program. b Display panel • Show current status. c • Connect USB storage devices. d AUDIO IN • Connect external audio devices. e Disc compartment f • Open or close the disc compartment. g VOLUME • Adjust volume. h SOURCE • Select a source: DISC, USB, TUNER, AUDIO IN. / • Skip to previous/next track.
f VOL +/• Adjust volume. Overview of the remote control g MUTE • Mute or restore volume. a b c CD FM r h SOUND • Enrich sound effect with Digital Sound Control (DSC). q i CLOCK • Set the clock. • View clock information. AUDIO IN PRESET/ALBUM d p e REPEAT f VOL g SHUFFLE MUTE DISPLAY SOUND CLOCK PROG TIMER h i SLEEP o n m l k j j SLEEP/TIMER • Set sleep timer. • Set alarm timer. k PROG • Program tracks. • Program radio stations. • Auto store FM radio stations.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect speakers Note •• Insert the stripped portion of each speaker wire into the socket completely. •• For better sound quality, use the supplied speakers only.
Prepare the remote control Caution Note •• MCM2320 switches to Standby mode after 15 minutes inactive. •• Risk of product damage! When the remote control is not used for long periods, remove the batteries. To insert the remote control battery: 1 2 3 Open the battery compartment. Insert the supplied AAA battery with correct polarity (+/-) as indicated. Close the battery compartment. Switch to ECO power standby mode Press and hold for more than two seconds.
Note •• To view clock information in working mode, press 4 Play CLOCK. •• If no button is pressed in 90 seconds during setting, MCM2320 exits clock setting without saving earlier operations. Select a source On the main unit Press SOURCE repeatedly to select a source. • [DISC]: the disc in the disc compartment • [USB]: .
Play from USB Note •• Make sure that the USB device contains playable audio VOL +/MUTE SOUND DISPLAY Increase or decrease the volume. Mute or restore sound. Select a preset sound equalizer. Adjust display brightness. content. 1 2 Insert a USB device into the socket. Press USB/AUDIO IN repeatedly to select the USB source. »» Play starts automatically. If not, press . Skip tracks When playing a CD: Press / to select tracks.
5 Listen to the radio Connect FM antenna Tip •• For optimal reception, fully extend and adjust the position of the antenna. •• For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA socket. Connect the supplied FM antenna to the FM ANTENNA socket on the main unit. Press / reception. repeatedly until you find optimal Program radio stations automatically Note •• You can program a maximum of 20 preset radio stations (FM).
6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • DSC1, DSC2, DSC3, DSC4, and DSC5 Adjust volume level • • On the remote control, press VOL +/repeatedly. On the main unit, rotate the volume knob. Mute sound • 7 Other features Set the alarm timer This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source.
Note •• If you do not stop an alarm, it keeps ringing for 30 minutes, and then the product automatically switches to normal standby mode. Listen to an external device You can listen to an external device through this unit with an MP3 link cable. 1 Activate/deactivate alarm timer In standby mode, press SLEEP/TIMER repeatedly to activate or deactivate timer. »» If timer is activated, is displayed. Tip 2 3 Connect an MP3 link cable (not supplied) between: • AUDIO IN jack (3.
8 Product information Note notice. Amplifier 30 W 60 Hz - 16 kHZ; +3 dB >70 dB <1% 800 mV RMS Speakers Speaker Impedance Speaker Driver Sensitivity 4 ohm Fullrange 4" >83 dB/m/W Tuner (FM) Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 14 EN 2.0 full speed ≤500 mA Laser Type Disc Diameter Support Disc Semiconductor 12 cm/8 cm CD-DA, CD-R, CDRW, MP3-CD 24 Bits/44.
USB playability information Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
Remote control does not work •• Before you press any function button, first select the correct source with the remote control instead of the main unit. •• Reduce the distance between the remote control and the unit. •• Insert the battery with its polarities (+/– signs) aligned as indicated. •• Replace the battery. •• Aim the remote control directly at the sensor on the front of the unit. No disc detected •• Insert a disc. •• Check if the disc is inserted upside down.
EN 17
Specifications are subject to change without notice. 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. MCM2320_12_UM_V2.