Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 Safety Notice 2 2 2 Your Micro Music System Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect power Prepare the remote control Demonstrate the features Power on Set the clock Select a source 4 4 4 5 6 7 10 5 Listen to the radio 12 6 Adjust sound 13 Tune to a radio station Program radio stations automatically Program radio stations manually Select a preset radio station Select a preset sound e
1 Important Safety Warning Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never look into the laser beam inside this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat.
Compliance This product complies with the radio interference requirements of the European Community. This apparatus includes this label: negative consequences for the environment and human health. Removing the disposable batteries To remove the disposable batteries, see battery installation section. Environmental information All unnecessary packaging has been omitted.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, USB devices, and other external devices; • listen to radio stations.
Overview of the main unit ab c kj a • • d ef i h g Turn on the product. Switch to standby mode or ECO power standby mode. b AUDIO IN • Connect external audio devices. c Display panel • Show current status. d e • • • • / Skip to previous/next track. Search within a track/disc. Tune to a radio station. Adjust time. • Start or pause play. l m n j SOURCE • Select a source: DISC, USB, TUNER, AUDIO IN. k • Connect USB storage devices. l SPEAKER OUT socket • Connect with the speakers.
Overview of the remote control e a b r c q p d o n e m l f g h • • • Search within a track/disc/USB. Tune to a radio station. Adjust time. • Play tracks randomly. f ALBUM/PRESET / • Select a preset radio station. • Skip to previous/next album. g DISPLAY • Adjust display brightness. • During playback, display the play information. h SLEEP/TIMER • Set sleep timer. • Set alarm timer. i CLOCK • Set the clock. • View clock information. k j PROG • Program tracks. • Program radio stations.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Connect power Caution •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. •• Before you connect the AC power cord, ensure that you have completed all other connections. Always follow the instructions in this chapter in sequence.
Demonstrate the features In standby mode, press to demonstrate features of this device. »» The features are displayed one by one across the display panel. • To turn off the demonstration, press again. Power on Note •• The product switches to ECO power standby mode after 15 minutes in standby mode. Switch between standby mode and ECO powerstandby mode: • Press and hold for more than two seconds.
Select a source On the main music system Press SOURCE repeatedly to select a source. • [DISC]: the disc in the disc compartment • [USB]: .mp3 files stored on the connected USB storage device • [TUNER]: the FM tuner • [AUDIO IN]: the audio input through the AUDIO IN socket On the remote control Press CD, FM, USB, orAUDIO IN to select each source directly. • CD: the disc in the disc compartment • FM: the FM tuner • USB: the .
4 Play Play from disc 1 2 3 4 Press CD to select CD source. Press to open the disc compartment. Insert a disc with the label side up. Press to close the disc compartment. »» Play starts automatically. If not, press . Control play / / Play from USB Note •• Make sure that the USB device contains playable audio content. 1 2 10 Insert a USB device into the socket. Press USB to select the USB source. »» Play starts automatically. If not, press . EN VOL +/SOUND DISPLAY Start, pause, or resume play.
Skip tracks When playing a CD: Press / to select tracks. When playing an MP3 disc and USB: 1 2 Press Press / to select an album or a folder. / to select a track or a file. Program tracks This function allows you to program 20 tracks in the desired sequence. 1 2 3 4 5 In stop mode, press PROG to activate the program mode. »» [PROG] (program) and [001 PR 01] are displayed. For MP3 tracks, press album. / to select an Press / to select a track, and then press PROG to confirm.
5 Listen to the radio Tune to a radio station Tip •• Position the antenna as far as possible from TV, VCR, or Program radio stations manually 1 2 3 other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. 1 2 3 Press FM to select FM source. Press and hold / for more than two seconds. »» The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations.
6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • DSC1, DSC2, DSC3, DSC4, and DSC5 Adjust volume level • • On the remote control, press VOL +/repeatedly. On the main unit, rotate the volume knob. Mute sound • Press to mute or unmute the sound.
7 Other features Activate/deactivate alarm timer In standby mode, press SLEEP/TIMER repeatedly to activate or deactivate timer. »» If timer is activated, is displayed. Set the alarm timer This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. Note Tip •• Alarm timer is not available in AUDIO IN mode.
2 3 Press AUDIO IN to select AUDIO IN source. Start to play the device (see the device user manual).
8 Product information •• Product information is subject to change without prior notice.
USB playability information Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
9 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
2015 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. MCM2350_12_UM_V1.
