User Guide

16
English
CD
Selecting and searching
Selecting a different track
● Press 4 / ¢ once or repeatedly until the
desired track number appears in the display.
MP3/WMA: ➜ Tr ack information scrolls briefly.
MP3/WMA:
● Press ALBUM/ PRESET once or more to
select the next or previous album.
➜ Album information scrolls briefly.
or
● In the stop position, press ALBUM/ PRESET
and 4 / ¢ to select the desired album
and track.
➜ MP3/WMA: Display shows current album/
track number.
Finding a passage within a track
during playback
1 During playback, press and hold 4 / ¢
➜ The CD plays at a high speed.
2 When you recognize the passage you want,
release 4 or ¢.
➜ Normal playback resumes.
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more than
once.
1 In the stop position, press PROGRAM to start
programming.
➜ PROG flashes.
2 Press 4 / ¢ once or repeatedly until the
desired track number appears in the display.
● MP3/WMA: press ALBUM/ PRESET and
4 / ¢ to select the desired album and
track.
3 Press PROGRAM to confirm.
➜ Display shows briefly the number of tracks
programmed.
➜ Then, the display shows the track number
you just stored.
4 Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL is displayed if you attempt to program
more than 20 tracks.
5 Press ÉÅ play the program.
Helpful hints:
– The set will return to the stop position if no
button is pressed within 90 seconds. To resume
programming, press PROGRAM.
– MP3/WMA: When playing a program, use of
ALBUM/ PRESET are void.
Erasing the program
You can erase the contents of the memory by:
● Press STOP 9
– once if in the stop position;
– twice during playback;
● Press STANDBY-ON.
● Select another sound source.
● Open the CD door.
➜ PROG disappears.
MCM239D_79_Eng 23/8/07, 9:5316