User Guide

26
English
The remote control does not function
properly.
The timer is not working.
The Clock/Timer setting is erased.
The USB device doesn’t play on my
MCM239D.
The STOP 9 and some buttons on
MCM239D and its remote control have
no function.
✔ Select the source (CD or TUNER, for example)
before pressing the function button (ÉÅ,í,
ë).
✔ Reduce the distance between the remote
control and the system.
✔ Insert the battery with its polarities
(+/– signs) aligned as indicated.
✔ Replace the battery.
✔ Point the remote control directly toward
IR sensor on the front of the system.
✔ Check the set is switched off
✔ Set the clock correctly.
✔ Press TIMER to switch on the timer.
✔ Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
Troubleshooting
✔ It is not set in the USB mode. Select USB mode.
✔ The device is not securely connected to
MCM239D’s USB port. Re-connect the device,
and make sure that the device is powered on.
✔ The device is not supported by MCM239D, or
the audio file format stored on the device is not
supported by MCM239D. Use a compatible
device/ playable audio file format.
✔ The playback of the docked player cannot be
stopped using the STOP 9 button on
MCM239D and its remote control.
✔ The buttons ( 2;, ¡1, 2™ and VOLUME) can
function only. To navigate the iPod menu, you may
use MENU, 34and OK buttons.
MCM239D_79_Eng 23/8/07, 9:5326