Micro Hi-Fi System MCM240 User manual Manuel d'utilisation Manual del usuario Benutzerhandücher Gebruikershandleidingen Manuale per l'utente Användarhandböckerna Brugermanual Käyttöoppaita Manual do usuário pg001-020_MCM240_22_Eng 1 2005.5.
Important notes for users in the U.K. Italia DICHIARAZIONE DI CONFORMITA’ Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Si dichiara che l’apparecchio MCM240 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. 1 2 Remove fuse cover and fuse. Fatto a Eindhoven 3 Refit the fuse cover. Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type.
1 3 ! 5 7 # $ @ 0 8 % * & ^ ( ) 2 5 1 3 4 6 7 8 ! 9 0 3 3 pg001-020_MCM240_22_Eng 3 2005.5.
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
English Index Français English ------------------------------------------------ 6 Español Français -------------------------------------------- 21 Deutsch Español --------------------------------------------- 36 Nederlands Deutsch --------------------------------------------- 51 Italiano Nederlands ---------------------------------------- 66 Svenska Italiano ---------------------------------------------- 81 Dansk Svenska --------------------------------------------- 96 Suomi Dansk ---------
Contents English General Information Clock/Timer Environmental information ................................ 7 Supplied accessories ............................................ 7 Safety information ................................................ 7 Preparations Setting the clock ................................................. 17 Viewing the clock ............................................... 17 Setting the timer ................................................. 17 Activating and deactivating TIMER .
This product complies with the radio interference requirements of the European Community. Environmental Information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
Preparations English FM wire antenna MW loop antenna Speaker (left) Speaker (right) AC power cord Rear connections B Antennas Connection The type plate is located at the rear of the system. For users in the U.K.: please follow the instructions on page 2. Connect the supplied MW loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.
FM Antenna English Preparations Before using the remote control 1 Pull out the plastic protective sheet. 2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD, TUNER). ● For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA terminal.
Controls (illustrations on page 3) English Controls on the system and remote control @ DISPLAY/CLOCK – – 1 STANDBY-ON/ ECO POWER (B) # – – switches the system on or to Eco Power standby/normal standby with clock display. sets the clock function. displays disc information during playback. TIMER activates/ deactivates or sets the timer function. $ SLEEP 2 Display screen – – % DSC (Digital Sound Control) shows the status of the system. 3 OPEN • CLOSEç – – opens/closes the CD door.
● To view clock time in standby mode, press and hold STANDBY-ON/ECO POWER (or B on the remote) for more than 3 seconds or more. ➜ The system enters the standby mode with clock display. ● The volume level (up to a maximum volume level of 20), interactive sound settings, last selected mode (ECO Power Standby or normal standby), source and tuner presets will be retained in the player's memory.
CD/MP3-CD Operation English Basic playback controls To play a disc ● Press ÉÅ to start playback. ➜ The current track number and elapsed playing time of the track are displayed during disc playback. To select a different track ● Press PRESETí / ë (or í / ë on the remote) once or repeatedly until the desired track number appears in the display. ● If you have selected a track number shortly after loading a disc or in the PAUSE position, you will need to press ÉÅ to start playback.
Notes: CD play will also stop when; – the CD door is opened. – the disc has reached the end. – you select another source: TUNER or AUX. – you select standby. – the set auto off time arrives. – no button is pressed within 15 minutes in the CD PAUSE position. REPEAT ............ plays the current track continuously 1 2 Playing an MP3 disc 1 2 3 4 Load an MP3 disc. ➜ The disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.
CD/MP3-CD Operation English 3 4 5 Press PROGRAM to confirm the track number to be stored. ➜ PROG X is shown briefly, followed by the number of the track (for MP3-CD, the album and title numbers of the track) you just stored. X denotes the next program number to be stored Repeat steps 2-3 to select and store all desired tracks. ➜ FULL is displayed if you attempt to program more than 40 tracks. To star t playback of your disc program, press STOP 9 followed by ÉÅ or press ÉÅ directly.
1 English Radio Reception Press PRESETí / ë (or í / ë on the remote) to select the preset number where programming should start. Note: – If no preset number is selected, default is preset (1) and all your presets will be overridden. 2 Press PROGRAM for more than 2 seconds to activate programming. ➜ AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by MW. The last preset automatically stored will then be played.
Radio Reception English Scrolling through different RDS information ● Press RDS briefly and repeatedly to scroll through the following information (if available): – Station name – Programme type such as NEWS, SPORT, POP M ... – Radio text messages – Frequency Note: – If you press RDS and the RDS signal is not available NO RDS is displayed. Setting the RDS clock Some RDS radio station may be transmitting a real clock time at an interval of every minute.
1 Setting the clock 1 2 3 In standby mode or system on, press and hold DISPLAY/CLOCK on the remote control for more than 3 seconds. ➜ SET CLOCK scrolls on the display. ➜ The clock digits for the hours flash. Press VOLUME (3 / 4) (+/-) to set the hours. Press DISPLAY/CLOCK again. ➜ The clock digits for the minutes flash. 4 Press VOLUME (3 / 4) (+/-) to set the minutes. 5 Press DISPLAY/CLOCK to confirm the time. Note: – The backlight for clock display is dim in standby.
Clock/Timer English Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time. ● Press SLEEP on the remote control once or more. ➜ Display shows SLEEP and one of the sleep time options in sequence: 90, 60, 45, 30, 15, OFF, 90... if you have selected a time. Once SLEEP is activated, SLEEP is display. ● To deactivate, press SLEEP on the remote control repeatedly until OFF is shown, or press STANDBY-ON/ ECO POWER (or B on the remote).
AMPLIFIER Output power .......................................... 2 x 5 W RMS ............................................................ 10 W + 10 W MPO Signal-to-noise ratio ....................................... ≥ 62 dBA Frequency response ......... 63 – 16000 Hz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) Impedance loudspeakers ......................................... 4 Ω Impedance headphones .................... 32 Ω -1000 Ω ................................................
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution “NO DISC” is displayed. ✔ Insert a disc. ✔ Check if the disc is inserted upside down.
