Micro System Register your product and get support at MCM355/12 EN User manual FR Mode d’emploi DA Brugervejledning IT DE Benutzerhandbuch NL Gebruiksaanwijzing ES Användarhandbok SV Användarhandbok Manuale utente
1 Important Safety Notice 2 Your Micro System Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect FM antenna Connect power Install remote control batteries Set clock Turn on 4 Play 2 2 4 5 5 5 6 7 9 9 9 9 10 10 10 11 11 5 Play options 12 6 Listen to the radio Tune to a radio station Program radio stations automatically Program radio stations manually Select a preset radio station Show RDS information Set clock with RDS 7 A
1 Important Safety Know these safety symbols h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/accessories specified by the manufacturer.
Remove batteries when the unit is not used for a long time. o Apparatus shall not be exposed to dripping or splashing. p Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). q This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org.
Notice This product complies with the radio interference requirements of the European Community. This product complies with the requirements of the following directives and guidelines: 2004/108/EC + 2006/95/EC Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit a g b h c i d j e k l m f a POWER • Turn on the unit, or switch to standby mode. b Power indicator c SRC • Select a source: CD, USB, TUNER, MP3 LINK or AUX. 6 EN n d • Start or pause play. • Stop play or erase a program. • Connect headphones.
i • j Open or close the disc compartment. / • • • Overview of the remote control English h Display panel • Show current status. POWER a b Skip to the previous/next track. Search within a track/ disc/USB. Tune to a radio station. k Volume controL • Adjust volume. l Disc compartment c d e DISC TUN USB MODE SLEEP TIMER DSC AUX/MP3 Link j k CLOCK/DISPLAY DBB l m f g PROG h n RDS o m • Jack for a USB mass storage device. n MP3 LINK • Audio input jack (3.
g / • Skip to the previous/next track. h PROG • Program tracks. • Program radio stations. i ALBUM/PRESET +/• Select a preset radio station. • Skip to the previous/next album. j TIMER • Set the alarm timer. • Activate or deactivate the alarm timer. k CLOCK/DISPLAY • Set the clock. • During play, select display information. l DBB • Turns on or off dynamic bass enhancement. m • Start or pause play. n RDS • Display available RDS (Radio Data System) information of an FM radio station.
Speaker (Right) English 3 Get started Speaker (Left) HIGH CH Caution Right L Left L Right H Left H LOW CH SPEAKERS 6Ω • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus.
1 Connect the power cord to the AC~MAINS jack on the main unit. Set clock 2 Connect the power plug to the wall outlet. 1 AC MAINS ~ In standby mode, press and hold CLOCK/DISPLAY to activate the clock setting mode. » [SET CLOCK] (set clock) is displayed briefly. Then the hour digits are displayed and begin to blink. Note • In Eco Power Standby mode, press CLOCK to show clock first, then press and hold CLOCK to proceed clock setting.
2 Insert the USB plug of a USB device into the socket. 3 Press USB to select the USB source. » The total number of tracks is displayed. Play disc 1 2 3 Press DISC to select the disc source. Press on the front panel to open the disc tray. Insert a disc with the printed side facing up, then close the disc tray. » Play starts automatically. • • • • • To pause/resume play, press . To stop play, press . For MP3/WMA disc: to select an album, press ALBUM/PRESET +/-. To skip to a track, press / .
5 Play options • • Repeat and random play 1 2 Press MODE repeatedly to select: • [REP] (repeat): the current track is played repeatedly. • [REP ALL] (repeat all): all tracks are played repeatedly. • [SHUF] (shuffle): all tracks are played randomly. • [REP ALL SHUF] (repeat all shuffle): all tracks are played repeatedly in random order. To return to normal play, press MODE repeatedly until play mode is no longer displayed. Tip • Shuffle play cannot be selected when you play programmed tracks.
Program radio stations manually English 6 Listen to the radio Note Tune to a radio station Note • For optimal reception, fully extend and adjust the • 1 2 stations. 1 2 position of the FM antenna. The unit does not support MW radio reception. Press TUN to select the tuner source. Repeat step 2 to tune to more stations. • To tune to a weak station, press / repeatedly until you find optimal reception. Program radio stations automatically Note Tune to a radio station.
» Program type such as [NEWS] (news(, [SPORT] (sport), [POP M] (pop music)... » Radio text messages » Frequency Note • The definitions of RDS program types are available (see ‘RDS program types’ on page 18). Set clock with RDS You can set the clock automatically with time signals that are broadcast together with some RDS radio stations. 1 Tune to a RDS radio station that transmits time signals. 2 Press and hold RDS for more than 2 seconds. » The unit reads the RDS time and sets the clock automatically.
English 7 Adjust sound Adjust volume 1 During play, to adjust volume: • On the remote control: press VOL +/-. • On the main unit: slide across the volume control on the front panel. Select a preset sound effect 1 During play, press DSC repeatedly to select: • [POP] (pop) • [CLASSIC] (classic) • [ROCK] (rock) • [JAZZ] (jazz) Enhance bass 1 During play, press DBB to turn on or off dynamic bass enhancement. » If DBB is activated, DBB is displayed.
8 Other features Set the sleep timer Activate and deactivate the alarm timer 1 This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP repeatedly to select a set period of time (in minutes). » When sleep timer is activated, the display shows . Press TIMER repeatedly to activate or deactivate the timer. » If the timer is activated, the display shows . » If the timer is deactivated, disappears on the display.
Note • Product information is subject to change without prior notice. Tuner (FM) Tuning Range 87.
• memory cards (requires an additional card reader to work with this MCM355) Supported formats: • USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 bytes) • MP3 bit rate (data rate): 32-320 Kbps and variable bit rate • WMA v9 or earlier • Directory nesting up to a maximum of 8 levels • Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • ID3 tag v2.
Caution • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power • Ensure that the AC power plug of the unit is connected properly.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. MCM355_UM_12_V2.