operation manual

EN 9
English
3 Get started
Caution
Use of controls or adjustments or performance of •
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
Ensure that the colors of the speaker wires and •
terminals are matched.
1 Hold down the socket fl ap.
2 Insert the stripped part of the wire
completely.
Insert the right speaker wires to •
“Right L/Right H”, left speaker wires
to “Left L/Left H”.
Insert the red/blue wires to “ • +”,
black wires to “ -”.
3 Release the socket fl ap.
abc
Connect FM antenna
1 Connect the supplied FM antenna to the
FM AERIAL jack on the main unit.
Connect power
Caution
Risk of product damage! Ensure that the power supply •
voltage corresponds to the voltage printed on the back
or the underside of the unit.
Risk of electric shock! When you unplug the AC power •
cord, always pull the plug from the socket. Never pull
the cord.
Before connecting the AC power cord, ensure you •
have completed all other connections.
Speaker
(Right)
Speaker
(Left)
HIGH CH
LOW CH
Right L
Left L
Right H
Left H
SPEAKERS 6Ω
FM aerial