MANT410 MNT410F Specifications are subject to change without notice. Trademarks are property of Koninklijke Philips Electronics N.V. or their respective owners. 2006 © Koninklijke Philips Electronics N.V. All rights reserved www.philips.
FR Installez Contents 2 3 3 3 3 4 4 4 4 5 5 5 5 Pour la réception UHF, positionnez l’anneau comme illustré.** Pour les canaux 14 à 69, tournez et/ou penchez l'anneau central vers le transmetteur. Utilisation du sélecteur Sélectionnez votre source de signal en basculant de ANTENNA à CABLE.
EN Connect Installez Connect coaxial cable to antenna 1 Connect supplied coaxial cable to the back of the antenna. 2 Connect the coaxial cable from your cable or satellite source to the back of the antenna to the connector labeled IN FROM CABLE. Point de départ suggéré Connect coaxial cable to TV Connect the supplied coaxial cable from the antenna to the back of your TV using one of the two methods illustrated*. Pour la réception VHF, positionnez l'antenne dipôle comme illustré.
FR Branchez Install Connectez le câble coaxial à l’antenne 1 Connectez le câble coaxial (inclus) à l’arrière de votre antenne. 2 Branchez le câble coaxial (inclus) depuis votre source télévisuelle (câble ou satellite) jusqu’à l’arrière de votre antenne, dans le connecteur libellé IN FROM CABLE (Entrée depuis Câble).
EN Install Table des matières 10 11 11 11 12 12 12 12 13 13 13 13 13 For UHF reception, position the dipoles as shown** For channels 14 through 69, rotate and/or tilt the center loop towards the transmitter. Using the selector switch Choose your signal source by switching from ANTENNA to CABLE.
ES Instalar Índice de contenido 6 7 7 7 7 8 8 8 8 9 9 9 9 Para la recepción UHF, coloque los dipolos del modo indicado.** Para los canales 14 a 69, rote y/o incline el bucle central hacia el transmisor.
ES Connectar Instalar Conectar el cable coaxial a la antena 1 Conectar el cable coaxial suministrado en la parte trasera de la antena 2 Conectar el cable coaxial de su fuente de cable o satélite en la parte trasera de la antena, en el conector que indica IN FROM CABLE. Punto de inicio sugerido Conectar el cable coaxial a la TV Conectar el cable coaxial suministrado desde la antena hasta la parte trasera del aparato de TV mediante uno de los dos métodos ilustrados*.