Operation Manual

8
EN
i /
• Mute or unmute the
microphone.
• Access to the answer machine
menu in standby mode.
• Listen to new messages from
the answering machine.
j Microphone
k
• Turn the speaker phone on/o.
• Make and receive calls through
the speaker.
l
• Press and hold to make an
intercom call (for multi-handset
version only).
• Set the dial mode (pulse mode
or temporary tone mode). This
function is country dependent.
m
• Make and receive calls.
• Recall key (This function is
network dependent.)
n
• Move the cursor to the left in
editing mode.
• Scroll to the left in main menu
mode.
o OK
• Access the main menu in
standby mode.
• Conrm selection.
• Enter the options menu
p Left softkey
• Access the main menu in
standby mode.
• Conrm selection.
• Enter the options menu
• Select the function displayed
on the handset screen directly
above the key.
q Battery door
r Touch sensor (area surrounding
the speaker)
• Touch and release to turn on
the speaker and pick up the
call when the handset is on the
base station. Touch and release
again to turn o the speaker
and hang up a call.
• Press to snooze the alarm
when the handset is on the
base station.
s Loudspeaker
Note
• The touch sensor is active only when the
handset is on the base station.
Overview of the base
station
a LED indicator
• O: no new event.
• On: in a call.
• Flashing normally: new missed
calls/new messages on
answering machine/new voice
mails.
• Flashing quickly: new incoming
calls.
3
1
2