Operation Manual

12
EN
Set the date and time
1
Select [Menu].
2
Press / to select , then press
[OK].
3
Select [Date & time], then press
[OK] to conrm.
4
Select [Set date]/[Set time], then
press [OK] to conrm.
5
Press the numeric buttons to enter
the date and time.
• If the time is in 12-hour format,
press to select [am] or [pm]
(Country dependent).
6
Press [OK] to conrm.
Note
• The base clock is automatically synchronized
with the handset clock.
Set the date and time format
1
Select [Menu].
2
Press / to select , then press
[OK].
3
Select [Date & time], then press
[OK] to conrm.
4
Select [Date format] or [Time
format].
5
Press / to select [DD-MM-
YYYY] or [MM-DD-YYYY] as the
date display, and [12 Hours] or [24
Hours] as the time display. Then
press [OK] to conrm.
» The setting is saved.
Note
• The date and time format setting is country
dependent.
Change the remote
access PIN/passcode
Note
• The default answering machine remote
access PIN/passcode is 0000 and it is
important to change it to ensure the security.
1
Select [Menu].
2
Press / to select , then press
[OK].
3
Select [Remote access] > [Change
PIN], then press [OK] to conrm.
4
Enter the old PIN/passcode, then
press [OK] to conrm.
5
Enter the new PIN/passcode, then
press [OK] to conrm.
6
Enter the new PIN/passcode again,
then press [Save] to conrm.
» The setting is saved.
Charge the handset
Charge your handset by docking it in
either direction. When the handset is
placed correctly on the base station,