Operation Manual

16
EN
6 Calls
Note
• When the power fails, the phone cannot
access emergency services.
Tip
• Check the signal strength before you make a
call or when you are in a call (see ‘Check the
signal strength’ on page 13).
Make a call
You can make a call in these ways:
• Normal call
• Predial call
• Call through the speed dial key
You can also make a call from the
redial list (see ‘Redial a call’ on page
29), phonebook list (see ‘Call from
the phonebook’ on page 23) and
call log (see ‘Return a call’ on page
28).
Normal call
1
Press or .
2
Dial the phone number.
» The number is dialed out.
» The duration of your current
call is displayed.
Predial call
1
Dial the phone number
• To erase a digit, press [Clear].
• To enter a pause, press and
hold .
2
Press or to dial out the call.
Call through the speed dial key
If you have already pre-saved a
contact in the speed dial key, press
and hold the key to make a call.
Tip
• For information of how to set the speed dial
keys, see the chapter 'Speed dial'.
Note
• The talk time of your current call is displayed
on the call timer.
• If you hear warning tones, the phone is
almost out of battery or out of range. Charge
the battery or move the phone close to the
base station.
Answer a call
When the phone rings, you can select
from the following options:
• Touch and release the sensor
(when the handset is on the base
station)or press or to answer
the call.
• select [Divert] to send incoming
call to the answering machine.
• select [Silent] to turn o the ringer
of the current incoming call.
Warning
• When the handset rings or when the
handsfree is activated, keep the handset
away from your ear to avoid ear damage.
Note
• The caller ID service is available if you have
registered to the caller ID service with your
service provider.