Operation Manual
17EN
Tip
• When there is a missed call, a notication
message appears.
End a call
You can end a call in these ways:
• Touch and release the sensor
during a call in speaker phone
mode (when the handset is on
the base station).
• Press ; or
• Place the handset to the base
station or charging cradle.
Note
• Placing the handset to the base station or
charging cradle does not end the call when
the auto hangup feature is turned o (see
‘Activate/Deactivate auto hang up’ on page
35).
Adjust the
earpiece/speaker
volume
Press / on the handset to adjust
the volume during a call.
» The earpiece/speaker volume is
adjusted and the phone is back
to the call screen.
Mute the microphone
1
Press during a call.
» The handset displays [Mute
on].
» The caller cannot hear you, but
you can still hear his voice.
2
Press again to unmute the
microphone.
» You can now communicate with
the caller.
Turn the speaker on or
o
Press .
Make a second call
Note
• This service is network dependent.
1
Press during a call.
» The rst call is put on hold.
2
Dial the second number.
» The number displayed on the
screen is dialed out.
Answer a second call
Note
• This service is network dependent.