Operation Manual

36
EN
15 Alarm clock
Your phone has a built-in alarm clock.
Check the information below to set
your alarm clock.
Set the alarm
1
Select [Menu].
2
Press / to select , then press
[OK].
3
Select [On]/[O], then press [OK]
to conrm.
4
Select [Alarm time], then press
[OK] to conrm.
5
Enter an alarm time, then press
[OK] to conrm.
6
Select [Repetition], then press
[OK] to conrm.
7
Select an alarm occurrence, then
press [OK] to conrm.
8
Select [Alarm tone], then press
[OK].
9
Select a tone from options, then
press [OK] to conrm.
» The alarm is set and is
displayed on the screen of the
pre-registered handset and
base station.
Tip
• Press to switch between [am]/[pm]
(country dependent).
Turn o the alarm
Before the alarm rings
1
Select [Menu].
2
Press / to select , then press
[OK].
3
Select [O], then press [OK] to
conrm.
» The setting is saved.
When the alarm rings
• Press [O] to turn o the alarm.
• Snooze the alarm by:
• Pressing [Snooze](or any key
except [O]) on the handset;
• Touching the sensor on the
handset when the handset is
on the cradle.
» The alarm rings again after 5
minutes. After you snooze it for
3 times, the snooze function is
o.
Tip
• If you do not snooze or switch o the alarm,
it will ring for 1 minute and enter the snooze
mode.