Operation Manual

46
EN
Note
• You can only delete the read messages. No
deleted messages can be recovered.
Call screening
You can hear the caller while he is
leaving a message.
Activate/Deactivate the call
screening
1
There are two ways to access the
answering machine menu:
• Press / ;
• Select [Menu], press / to
select , then press [OK].
2
Select [HS screening] > [On]/[O],
then press [OK] to conrm.
When the call screening function is
activated, you can:
• press [Silent] to stop listening to
the caller. Press [Screen] to listen
to the caller again.
• touch and release the sensor
(when the handset is on the base
station)or press / to answer
the call.
• press / to adjust the speaker
volume during call screening.
Set the ring delay
You can set the number of times the
phone rings before the call goes to the
answering machine.
1
There are two ways to access the
answering machine menu:
• Press / ;
• Select [Menu], press / to
select , then press [OK].
2
Select [Ring delay], then press
[OK] to conrm.
3
Select a new setting, then press
[OK] to conrm.
» The setting is saved.
Note
• Make sure that the answering machine is
switched on before this feature can be
applied.
Tip
• When you access the answering machine
remotely, you are recommended to set
the ring delay to [Toll saver] mode. This
is a cost eective way to manage your
messages. When there are new messages,
the answering machine picks up the call after
3 rings; When there is no messages, it picks
up the call after 5 rings.
Remote access
You can operate your answering
machine when you are away from
home. Simply make a call to your
phone with a touch tone phone and
enter your 4-digit PIN/passcode.