Operation Manual

47EN
Note
• The remote access PIN/passcode is the
same as your system PIN/passcode. The
preset PIN/passcode is 0000.
Activate/deactivate the remote
access
You can allow or block remote access
to the answering machine.
1
Select [Menu].
2
Press / to select , then press
[OK].
3
Select [Remote access], then press
[OK] to conrm.
4
Select [Activate]/[Deactivate], then
press [OK] to conrm.
» The setting is saved.
Change the PIN/passcode
1
Select [Menu].
2
Press / to select , then press
[OK].
3
Select [Remote access] > [Change
PIN], then press [OK] to conrm.
4
Enter the old PIN/passcode, then
press [OK] to conrm.
5
Enter the new PIN/passcode, then
press [OK] to conrm.
6
Enter the new PIN/passcode again,
then press [Save] to conrm.
» The setting is saved.
Access the answering machine
remotely
1
Make a call to your home number
with a touch tone phone.
2
Enter # when you hear the
announcement.
3
Enter your PIN/passcode.
» You now have access to your
answering machine, and you
can listen to the new messages.
Note
• You have 2 chances to enter the correct
PIN/passcode before your phone hangs up.
4
Press a key to carry out a function.
See the remote access commands
table below for a list of available
functions.
Note
• When there is no message, the phone hangs
up automatically if no key is pressed for 8
seconds.