DVD VIDEO / SACD DIGITAL SURROUND SYSTEM 5800SA MX 1
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 Remove fuse cover and fuse. 3 Refit the fuse cover. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp.
DK Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten. S Laserapparat av Klass 1 Varning! Om apparaten används på annat sätt än som anges i denna bruksanvisning kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
Deutsch ----------------------------------------------- 6 Deutsch Nederlands ---------------------------------------- 46 Nederlands Italiano ---------------------------------------------- 64 Italiano Español --------------------------------------------- 96 Français Français -------------------------------------------- 56 Español English ------------------------------------------------ 8 English Index 5
Contents English General Information Disc Operations Supplied accessories ............................................ 8 Care and safety information .............................. 8 Playable discs ....................................................... 22 Playing discs ......................................................... 22 Turning on / off auto Eco standby mode .. 23 Using the Disc Menu ......................................... 23 Basic playback controls .....................................
Contents English Tuner Operations Tuning to radio stations .................................... 38 Presetting radio stations ................................... 38 Using the Plug and Play ............................... 38 Automatic presetting ................................... 39 Manual presetting ......................................... 39 Selecting a preset radio station ....................... 39 Deleting a preset radio station .................. 39 Timer Operations Setting the timer ...............
General Information English Supplied accessories Care and safety information Surround/centre speaker cable (3x) Front speaker and Subwoofer cables (2x) Avoid high temperatures, moisture, water and dust – Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight.) Always keep the disc tray closed to avoid getting dust on the lens.
Connections screws mini speaker stand Step 2: Set up the front speakers with the subwoofer stands English Step 1: Set up the surround speakers front speaker 1 2 subwoofer stand 1 OR 2 1 Before connecting the surround speakers 2 to the DVD system, firmly attach the mini speaker stands to the surround speakers using the supplied screws. OR Alternatively, you can choose to mount the speakers on the wall. Attach the supplied bracket firmly to the rear of speakers using the supplied screws.
Connections English Step 3: Connecting speakers and twin subwoofer L R SUB-WOOFER SPEAKER SYSTEMS (4Ω) front speaker with subwoofer stand (left) SURROUND CENTER FRONT front speaker with subwoofer stand (right) ~ AC MAINS L MW R FM ANTENNA C AUDIO DIGITAL OUT SL AUX IN TV IN LINE OUT VIDEO OUT CVBS SCART L SR R DIGITAL IN S-VIDEO Centre speaker Surround speaker (left) Surround speaker (right) Connect the supplied speaker systems using the supplied speaker cables by matching the col
Step 4: Placing the speakers and subwoofer stands Step 5: Connecting FM/MW antennas Centre speaker and DVD system Front speaker with subwoofer stand (Left) 2 FM antenna ➠ Front speaker with subwoofer stand (Right) MW antenna 1 1 1 2 L R SUB-WOOFER SPEAKER SYSTEMS (4Ω) SURROUND CENTER FRONT fix the claw into the slot MW FM ANTENNA C SL AUDIO DIGITAL OUT AUX IN TV IN LINE OUT VIDEO OUT CVBS L SR R 3 Surround Speaker (Left) 3 DIGITAL IN S-VIDEO Surround Speaker (Right) For best p
Connections English Step 6: Connecting TV AUDIO OUT S-VIDEO IN SCART IN VIDEO IN AUDIO OUT S-VIDEO IN SCART IN VIDEO IN L R SUB-WOOFER SPEAKER SYSTEMS (4Ω) SURROUND CENTER FRONT OR ~ AC MAINS MW FM ANTENNA C SL OR AUDIO DIGITAL OUT AUX IN TV IN LINE OUT VIDEO OUT CVBS SCART L SR Pb P-SCAN ON OFF R DIGITAL IN IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV system. – Connect the DVD system directly to the TV.
Connections VOLTAGE SELECTOR English Step 7: Connecting the power cord ~ AC MAINS MW FM ANTENNA AUDIO DIGITAL OUT AUX IN TV IN LINE OUT 110V 127V VIDEO OUT CVBS 220V 240V SCART L P-SCAN ON OFF R DIGITAL IN S-VIDEO AUDIO OUT S-VIDEO IN SCART IN ~ AC MAINS VIDEO IN power outlet After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on.
Connections (optional) English Connecting a VCR or Cable/Satellite Box AUDIO OUT AUDIO OUT S-VIDEO IN SCART IN VIDEO IN S-VIDEO IN SCART IN VIDEO IN 1 ~ AC MAINS ANT IN L R SUB-WOOFER SPEAKER SYSTEMS (4Ω) SURROUND CENTER FRONT TO TV VCR or Cable/Satellite Box ~ AC MAINS MW FM ANTENNA C SL AUDIO AUX IN DIGITAL OUT TV IN LINE OUT VIDEO OUT CVBS SCART L SR 3 Pb P-SCAN ON OFF R DIGITAL IN S-VIDEO 2 Viewing and listening to the playback 1 Connect the VCR or Cable / Satellite Box
Connections (optional) L R English SUB-WOOFER SPEAKER SYSTEMS (4Ω) SURROUND CENTER FRONT Connecting digital audio equipment ~ AC MAINS MW FM ANTENNA C SL AUDIO 2 DIGITAL OUT AUX IN LINE OUT VIDEO OUT CVBS SCART L SR R 1 DIGITAL IN S-VIDEO DIGITAL IN DIGITAL OUT (for example) CD Recorder Listening to the playback 1 Connect the DVD system’s DIGITAL IN jack to the DIGITAL OUT jack on a digital audio device.
Functional Overview English Main unit and remote control 1 2 3 4 5 6 789 0 ! @ OPEN•CLOSE # $ %^ DVD VIDEO DIGITAL SURROUND SYSTEM DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 1 TREBLE PLAY• PAUSE DISC 2 STOP SEATING SOURCE VOLUME CENTRE FT D ISC RIG DVD HT LE DISC 3 DISC 4 SEARCH SURROUND DISC 5 PROG TUNING CLOCK•TIMER SU RR 5 DISC CHANGER RL SU SU B BASS STANDBY-ON iR SENSOR 1 STANDBY ON – – S SEARCH T (PREV/NEXT) Switches to Eco Power standby mode or turns on the s
Control buttons available on the remote only & SYSTEM MENU (DVD mode only) – @ Enters or exits system setup menu. ‹ DISC/ MEDIA TV/AV AUX/DI TUNER * Joystick 1 2 3 4 1 2 3 – – 4 5 6 Selects movement direction in the menu. Use 1 2 to select a preset radio station. ( OK – ! $ Confirms a selection. ) DISC SKIP – & * 0 ¡ REPEAT – Selects various repeat modes. ™ VOICE (only available in Multi-channel mode) – Turns on/off clear voice sound effect.
Getting Started English Step 1: Inserting batteries into the remote control Step 2: Setting the clock The clock can be set in either 12-hour or 24-hour mode ("12:00 AM" or "00:00" for example). 3 buttons on front panel 1 DVD system’s display panel CLOCK•TIMER 2 SELECT CLOCK OR TIMER 2 CLOCK•TIMER CLOCK 3 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, SEARCH following the indications (+-) inside the compartment. PROG 5 3 Close the cover.
Step 3: Setting the TV IMPORTANT! Make sure you have completed all the necessary connections. (See page 12 “Connecting TV”). 1 Adjust SOURCE control until “DISC X” Selecting the colour system that corresponds to your TV This DVD system is compatible with both NTSC and PAL. In order for a DVD to play on this DVD system, the colour system of the DVD, the TV and the DVD system should match. appears on the display panel (or press DISC/ MEDIA on the remote).
Getting Started English Step 4: Selecting speaker layout SYSTEM MENU 1 2, 3 DISC MENU SEATING ZOOM PREV NEXT 4 OK STOP 1en 1 1en Digital output 7 st All 1 SURR. Multi-channel Night mode Off Karaoke vocal Off Square Speakers Settings... PCM output 48 kHz SYSTEM MENU 1 In disc mode, press SYSTEM MENU. 2 Use the joystick (1 2 3 4) on the remote to navigate in the menu. icon and press 4. Move to and press 2. Move to {Speaker Layout} and press 2.
Setting the speakers’ channels You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup. Speaker settings are only active on Multi-channel audio outputs.
Disc Operations English IMPORTANT! – DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your player. – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the disc player to malfunction.
Disc Operations It is a power-saving feature, the system will automatically switch to Eco standby mode if you do not press any buttons within 30 minutes after a disc has stopped playing. buttons on front panel 1 2 STANDBY-ON STOP DVD system’s display panel 13:38 AUTO ECO ON 1 Press and hold STANDBY ON to switch the system to standby mode. ➜ The clock appears. 2 Press and hold Ç until “AUTO ECO Basic playback controls English Turning on/off auto Eco standby mode Pausing playback ● Press ÉÅ.
Disc Operations English Selecting various repeat functions Repeat play mode ● While playing a disc, press REPEAT to select : Programme favourite tracks (audio CDs only) You can play the contents of the disc in the order you want by programming the order of the tracks to be played. Up to 20 tracks can be stored. REPEAT CHAPTER (DVD) – to repeat playback of the current chapter. REPEAT ALBUM (MP3) – to repeat playback of the current album.
Disc Operations English 4 Press S / T or use the numeric keypad (0-9) to enter the track number. 5 Press OK to store the track. 6 Repeat steps 4~5 to select other tracks. 7 Press ÉÅ to start programme playback. ➜ Only the tracks programmed from audio CDs will play. 8 Press Ç to stop playback or exit programme mode. Helpful Hint: – If you do not press any buttons within 20 seconds, the system will exit programming mode. Clearing the programme ● Stop playback, then press Çagain.
Disc Operations English Using the menu bar to programme Favourite Track Selection (FTS) lets you play your favourite Titles / Chapters or Tracks/Indexes in the order you select. An FTS programme can contain 20 items (Titles, Chapters, etc.). IMPORTANT! – It is only possible to programme from the current selected disc tray. – You have to turn on your TV and set to the correct Video In channel. (See page 19 “Setting the TV”). 1 Insert a disc (DVD,Video CD or Audio CD). 2 In disc mode, press SYSTEM MENU.
Playing MP3 disc IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 19 “Setting the TV”). 1 Load an MP3 disc. ➜ The disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration. 2 Playback will start automatically. ➜ A list of albums/tracks menu will appear on the TV. (example for MP3 album menu) Programme MP3 disc It is only possible to programme from the last selected album. Up to 99 tracks can be stored in the programme.
DVD Menu Options English Using the menu bar You can continue a number of operations directly via the multiple menu bars on the TV screen without interrupting the disc playback. The exception is when you (SETUP MENU), the playback enter will pause. SYSTEM MENU DISC MENU 1 2 SEATING ZOOM PREV NEXT 3 OK STOP PLAY/PAUSE 1 In disc mode, press SYSTEM MENU. ➜ The menu bar will appear across the top of the TV screen. Subtitle Language Press 34 to select a subtitle language available on the DVD.
Using the Setup Menu (User Preference Settings) This DVD setup is carried out via the TV, enabling you to customise the DVD system to suit your particular requirements. SYSTEM MENU Setting the TV shape The format you select must be available on the disc. If it is not, the setting for TV Shape will not affect the picture during playback.
DVD Menu Options English Improving the image for NTSC setting This feature is only applicable if you have set the ‘TV System’ to ‘NTSC’ setting (see page 19). Follow the steps of “Using the setup menu” and select : Selecting a predefined colour setting This DVD system provides four predefined sets of colour settings and one personal setting which you can define yourself.
Setting the digital output Set Digital Output according to your optional audio equipment connections. Follow the steps of “Using the Setup Menu” and select : Follow the steps of “Using the Setup Menu” and select : > Digital Output 1en 1en Digital output Analog output Night mode 1 Setting the PCM output Set your PCM (Pulse Code Modulation) output only after you have set the system’s Digital Output to ‘PCM only’. (See “Setting the digital output”).
DVD Menu Options English Setting the analogue output Set Analogue Output to match your DVD home cinema system’s playback capability. This function can also be accessed via the SURR. button on the remote control (or SURROUND on the front panel).
DVD Menu Options Help text – turning on/ off Follow the steps of “Using the Setup Menu” and select : > Status window 1en 1 1en > Help text st Access control Status window PBC English Status window – turning on/ off Follow the steps of “Using the Setup Menu” and select : 1en 1 1en st Access control Status window On Off PBC Help text Help text On Off Off Select this to remove the status window from the TV screen. Off Select this to turn off the help text display.
DVD Menu Options English Changing the password You can change the four-digit code used for Access Control. 5 Move to {Change code} and press 2. 1en 1en Access control Status window PBC 4, 6 TUNER [ [ [ [ ] ] ] ] AUX/DI 1 2 4 5 3 6 7 8 9 SURR. 0 SOUND 6 Use the numeric keypad (0-9) to enter VOL SYSTEM MENU 1, 7 2, 3, 5 st Help text DISC/ MEDIA TV/AV 1 Child lock Parental level Change country Change code your new four-digit code. Then, enter the same code again to reconfirm.
Restricting playback by setting Parental Level (only available in region 1 players) Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. 4 Use the numeric keypad (0-9) to enter the four-digit code.
DVD Menu Options English Locking / Unlocking the DVD for viewing Not all DVDs are rated or coded by the disc maker. You can prevent a specific DVD from playing by locking or unlocking the DVD, regardless of its rating. 5 Move to {Child lock} and press 2. 6 Press 3 4 to select Ç (lock) or É (unlock), then press OK. ➜ Locked discs will not play unless you enter your four-digit code.
Enabling Play once/Play Always Changing the country You can enable or disable viewing of a specific disc. The DVD system can memorise settings for 120 discs. When you select {Play Always}, the disc currently in the player moves to the top of the list. When the list is full and you add a new disc, the last disc in the list will drop out of the list. If a disc has Parental Level coding, the codings are applicable only for the country specified on the disc. The disc manufacturer sets these codings.
Tuner Operations English IMPORTANT! – Make sure the FM and MW antennas are connected. – The TUNING button on the front panel is used to toggle between frequency tuning and preset tuning. When in preset tuning mode, pressing S / T buttons on the front panel will change the preset number. Otherwise, pressing S / T will change the radio frequency.
Tuner Operations DVD system’s display panel DISC/ MEDIA TV/AV TUNER AUX/DI 1 1 2 3 5 6 8 9 0 SOUND 2 DISC MENU SEATING PROG on the front panel). 2 Press 1 2 or use the numeric keypad (0-9) to select a preset number. select a radio station. VOL SYSTEM MENU 1 In tuner mode, press PROGRAM (or 3 Press S / T on the remote to 4 7 SURR. FM TUNER Manual presetting You can choose to store only your favourite radio stations.
Timer Operations English Setting the timer The system can switch on to DISC or TUNER mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT! – Before setting the timer, ensure that the clock is set correctly. – The volume of the timer will increase gradually to the last tuned volume level. If the last tuned volume level is too low, the set will then increase to a predetermined minimum audible level.
Timer Operations English Setting the Sleep timer The sleep timer enables the system to switch to Eco Power standby mode automatically at a preset time. ● Press SLEEP on the remote repeatedly until it reaches the desired preset turn-off time. ➜ The selections are as follows (time in minutes): 15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™ OFF ™ 15 … ➜ SLEEP will show on the display panel, except if "OFF" is selected. ➜ Before the system switches to Eco Power standby mode, a countdown of 10 seconds is displayed.
Sound and Volume Controls English Sound Control IMPORTANT! For proper surround sound, make sure the speakers and subwoofer are connected (see page 10). Selecting surround sound ● Press SURROUND (SURR.) to select : MULTI-channel, 3D SOUND or STEREO. ➜ The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc. ➜ The centre and surround speakers operate only when the DVD home cinema system is set to Multi-channel mode.
Switching on/off Switching to active mode ● Adjust the SOURCE control to select : DISC 1....DISC 5 ™ FM TUNER ™ MW TUNER ™ TV/AV ™ AUX ™ DI ™ DISC 1.... OR Press DISC/MEDIA, TUNER, TV/AV or AUX/DI on the remote. Switching to Eco Power standby mode ● Press STANDBY ON (B). ➜ ECO POWER button lights up. ➜ The display screen will go blank. Switching to standby mode (view clock) ● Press and hold STANDBY ON (B). ➜ The clock appears.
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Solution Problem No power. – – No picture. – – Distorted or poor picture.
Solution Problem The DVD player does not start playback. – – – – – – Insert a readable disc with the playback side facing down. Check the disc type, colour system and region code. Check for any scratches or smudges on the disc. Press SYSTEM SETUP to turn off the setup menu screen. Change the rating level. Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. Cannot activate some features, such as Angles, Subtitles, or multi-language Audio.
Specifications English AMPLIFIER SECTION MAIN UNIT Output power - Stereo mode (DIN) 75 W + 75 W RMS1 - Surround mode (1 kHz) 75 W RMS/channel Frequency Response 120 Hz – 20 kHz / –3 dB Signal-to-Noise Ratio > 65 dB (CCIR) Input Sensitivity - AUX In 880 mV - TV In 350 mV Output Sensitivity - Headphone 32 Ω – 1000 Ω - Line Out 600 mV - Digital In acc IEC 60958 & IEC 61937 Power Supply Rating Power Consumption Dimensions (w x h x d) Weight 1 4ohm, 1 kHz, 10% THD 220 – 240 V; 50 Hz 150 W 435 x 100 x 360 (
Analogue: Sound that has not been turned into numbers. Analogue sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.).
