Remote Control User Manual
Table Of Contents
- Onis 6311
- Onis 6511
- The display
- Table of contents
- Safety information
- Installing your Onis
- Using your Onis
- The caller list
- Your Onis Memo recorder
- Personalising your telephone
- Your Phone book and emergency number
- Using advenced functions
- Connection to a PABX
- Useful tips and maintenance
Personalising your telephone20
Personalising your
telephone
You can personalise certain features of your telephone using
menu mode
.
Entering menu mode
Press the
R
key on the handset.
The
M
symbolis displayed and will stayon as long as you are in
menu mode
.
The first menu option,
3+21(%22.
will be shown on the display.
To quit menu mode, press
R
once more or press
t
.
Setting the dial mode
This option sets the way your telephone sends numbers to the telephone line. You
can choose one of two dial modes (TONE or PULSE).
Press
R
,thenpress
+
to display
6(783
. Press
o
.
Press
-
until you reach
',$/ 02'(
then press
o
.
Press
+
or
-
to select
721(
or
38/6(
, then press
o
.
Your handset beeps to indicate that the dial mode has been changed.
Press
R
to leave menu mode.
Note:
(UK only)
Although this equipment can use either loop disconnect (PULSE) or DTMF
signalling (TONE), only the performance of the DTMF signalling is subject to
regulatory requirements for correct operation. It is therefore strongly
recommended that the equipment is set to use DTMF signalling of access to public
or private signalling emergency services. DTMF signalling also provides faster call
set up.
1
2
1
2
3
4
Tip
You can change the dial mode from PULSE to TONE during a call
by pressing
*
. The dial mode will r eturn to PULSE after the call.