Register your product and get support at OR7200 User manual
OR7200 User Manual
2 sec.
2 sec.
DAB+
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 1 Safety Read and understand all instructions before you use this product. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! • • • • • • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
• • Never expose the product to rain, water, sunshine, or excessive heat. Avoid force coming onto power plugs. Loose power plugs can cause arcing or fire. Risk of injury or damage to the product! • • • • This product shall not be exposed to dripping or splashing! Do not place any sources of danger on this product (e.g. liquid filled objects, lighted candles). Never place the product or any objects on power cords or on other electrical equipment.
• • a BS 1362 approval, and the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord. How to connect a plug The wires in the power cord are colored as follows: blue = neutral (N), brown = live (L).
5 1 2 Set the clock (Fig. 3) In standby mode, press and hold the »» knob for 2 seconds. (12-hour time format) or (24-hour time format) blinks. Turn the knob to select a time format, and then press the knob to confirm. »» Hour digits blink. 3 Turn the knob to set the hour, and then press the knob to confirm. »» Minute digits blink. 4 5 6 1 2 Turn the knob to set the minute. Press the knob to confirm. Listen to FM radio stations Turn the SOURCE knob to switch the product to FM mode.
Search for a radio station automatically Press SCAN to activate the auto search. »» After a strong station is detected, the search stops and the radio station is broadcast. Search for a radio station manually Turn the displayed. knob until the frequency of target radio station is Store radio stations automatically (Fig. 4) Press and hold SCAN to activate the auto search. • »» After the search is complete, the first stored radio station is broadcast.
Program radio stations manually 1 2 3 4 5 • Tune to a radio station. Press the PROGRAM button to activate the programming. Turn the knob to select a preset sequence number. Press the knob to confirm. »» The radio station is stored with the selected sequence number. Repeat steps 1-4 to program more radio stations. To tune to a preset radio station, turn the PRESET knob until its frequency is displayed.
• • • • • Program type such as [NEWS] (news), [SPORT] (sport), [POP M] (pop music)...
MOR M Light music FOLK M LIGHT M Light classical music DOCUMENT Documentary Folk Music CLASSICS Classical music TEST Alarm Test OTHER M Special music programs ALARM Alarm WEATHER Weather Adjust FM settings 1 2 In FM mode, press MENU to access FM menus. Turn the knob to toggle through the menus. Scan setting 1 2 Press the 3 Press the knob to access sub-menus. Turn the knob to select an option. • : Search for strong stations only.
Audio setting 1 2 Press the 3 Press the knob to access sub-menus. Turn the knob to select an option. • : Allow stereo output even if the station transmits weak stereo audio signals. • : Convert stereo signals to monophonic output even if the station transmits strong stereo audio signals. knob to confirm the option. System menus 1 2 • Press the knob to access system menus. Turn the knob to select a sub-menu. For details, refer to the section ‘Use system menus‘.
7 Listen to DAB radio stations Note •• For optimal reception, fully extend the antenna and adjust its position. •• You can program a maximum of 30 DAB radio stations. •• Check with local retailer or go to www.WorldDAB.org for applicable DAB radio frequencies in your area. For the first time use (Fig. 5) 1 2 3 Turn the SOURCE knob to switch the product to DAB mode. Turn the knob until the menu is displayed. Press the knob to activate the automatic search.
Tip •• You can re-scan to update the list of stored stations (see "Use DAB menus" > "Re-scan for stations"). •• You can tune to a station manually (see "Use DAB menus" > "Tune to a station manually"). About special symbols Some symbol may be displayed before the name of a station. • • • • H: The station is one of your 10 favorite stations. ?: The station is unavailable or inactive. : The station is a primary station with secondary service. : The station is a secondary station.
Note •• If you store a radio station with the sequence number of another one, the earlier one is overwritten. Display DAB information On the display of DAB broadcasting, the first line shows station name, and the second line shows the service information for the current station. Press INFO repeatedly to cycle through the following information (if available).
Tune to a stored station 1 Press the knob to access the list of stored stations. • If no DAB station is stored, the product starts automatic search. 2 3 Turn the knob to select a station. Press the knob to start listening. Re-scan for stations Full scan is used to perform a wide range search for DAB radio stations. Press the knob to start scanning for available DAB stations. »» After the scanning is complete, the first detected station is broadcast.
Tune to a station manually With this feature, you can tune to a specific channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with this feature. 1 2 Press the knob to access the station list. Turn the knob to select a station from 5A to 13F. 3 Press the knob to confirm the option. DRC (Dynamic Range Control) DRC adds or removes a degree of compensation for the differences in the dynamic range between radio stations.
2 3 Turn the knob to select an option. • : No compensation applied. (The asterisk indicates the current setting.) • : Medium compensation applied. • : Maximum compensation applied. Press the knob to confirm the option. Remove invalid stations This option lists active stations and removes any stations that are in the list but have no service in your area. In front of the station name of an invalid station, a question mark (?) is displayed.
2 • Turn the knob to select a sub-menu. For details, refer to the section ‘Use system menus‘. 8 Use system menus Use the system menus to • • • check the version of current software of this product, upgrade the software, and reset the product to factory default status. Check the current software version Press the knob to display the version of current software. Reset the product 1 2 Press the 3 Press the knob to display the options. Turn the knob to select an option.
Upgrade the software 1 2 Go to www.philips.com/support. Search for support information about your product with “OR7200/10“ as the keyword. »» When an upgrade packet is available, the link of “Firmware Upgrade Readme File“ is accessible. The exact wording of this link name may vary in different languages. 3 4 5 9 Click the link of “Firmware Upgrade Readme File“. Read and understand the instructions on software upgrade. Follow the instructions to complete the upgrade. Listen to an external device (Fig.
3 Play the external device (refer to its user manual). 10 Adjust the volume Turn the 11 knob. Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support).
Poor radio reception •• Due to the interference from other electrics or building obstacles, the signals become weak. Move the product to a place free of interference. •• Make sure that the antenna is fully extended. Adjust the position of the antenna. Clock setting is erased. • • Power has been interrupted, or the AC power cord has been disconnected. Set the clock again. 12 Product information Note •• Product information is subject to change without prior notice.
Tuner Tuning Range FM: 87.50 - 108.00 MHz; DAB: 174.928-239.200 MHz Tuning grid 50 kHz DAB sensitivity (EN50248) < -95 dbm Total Harmonic Distortion < 2% Signal to Noise Ratio > 50 dBA Number of preset radio stations 30 (FM), 30 (DAB) Speakers Speaker Impedance 4 ohm Speaker Driver 2 X 3" full range Sensitivity >82 dB/m/W General information AC Power Rating 220-240 V~, 50 Hz Operation Power Consumption 10 W Dimensions (Main Unit) 325 x 175 x 167 mm Weight (Main Unit) 3.
13 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Compliance This product complies with the radio interference requirements of the European Community. This is CLASS II apparatus with double insulation, and no protective earth provided. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
All registered and unregistered trademarks are property of their respective owners. © 2012 Koninklijke Philips Electronics N.V. All rights reserved. OR7200_10_UM_V1.