Always there to help you Register your product and get support at www.philips.
Contents 1 Safety 2 2 Your docking system 3 3 3 4 5 Introduction What's in the box Overview of the product Know about the LCD display 3 Get started Assemble the AC power adaptor Connect power Power on Adjust brightness 6 6 6 6 7 4 Set the clock 8 5 Use the alarm timer 9 9 9 9 9 Set an alarm Deactivate a preset alarm Snooze the alarm Stop the alarm 6 Listen to FM radio stations Switch to FM mode Search for a radio station automatically Search for a radio station manually Store radio stations au
1 Safety • Read and understand all instructions before you use this product. If damage is caused by failure to follow the instructions, the warranty does not apply. • Risk of electric shock or fire! • Never remove the casing of the product. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately.
2 Your docking system What's in the box Check and identify the contents of the package: Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the product a l b k c j i h d e g f a TIMER • Press and hold to start setting the countdown timer. b • • • In standby mode, press and hold to start setting time and date. In FM or DAB mode, press and hold to access the menus. When listening to an RDS or DAB station, press repeatedly to display available information. c SLEEP • Press repeatedly to set the sleep timer. h AL1/AL2 • Press and hold to start setting the alarm timer. • When an alarm rings, press to stop the alarm.
l SNOOZE/BRIGHTNESS • Press to adjust the brightness of LCD display. • When an alarm rings, press to snooze the alarm. Know about the LCD display a b c d e f g a The first alarm is activated. b The second alarm is activated. c The clock d Text information e The sleep timer is activated. f The countdown timer is activated.
3 Get started 4 Always follow the instructions in this chapter in sequence. Connect power Fix another plug converter to the power adaptor. Assemble the AC power adaptor 1 2 Align the plug converter to the holes on the power adaptor. Push the plug converter downwards until you hear a "click". Replace a plug converter Connect the AC power adaptor between • the DC-IN socket on the back panel, and • the AC power outlet. »» The product switches to standby mode. »» [0:00] blinks.
The product switches to standby mode automatically under the following conditions. • In Bluetooth mode, the Bluetooth connection is lost for 15 minutes. • In DAB mode, no program is broadcast in 15 minutes. Adjust brightness Press BRIGHTNESS repeatedly to adjust the brightness of the LCD display.
4 Set the clock Note •• To manually set the clock, switch the product to standby mode first. 1 2 3 4 5 6 In standby mode, press and hold until [Set time] is displayed. »» The hour digits blink. Press / to set the hour, and then press to confirm. »» The minute digits blink. Press / to set the minute, and then press to confirm. »» The date is displayed with the day digits blink. Press / to set the day, and then press to confirm. »» The month digits blink. Press / to set the month, and then press to confirm.
5 Use the alarm timer 6 Press / to select the volume level, and then press to confirm. »» [Alarm Saved] flashes. Deactivate a preset alarm Note •• Make sure that you have set the clock correctly. Set an alarm You can set two alarms. 1 2 3 4 5 Press and hold AL1 (or AL2) for two seconds. »» [Alarm 1] (or [Alarm 2]) is displayed with AL1 (or AL2) blinking. »» The current alarm time is displayed with hour digits blinking. Press / to set the hour, and then press to confirm.
6 Listen to FM radio stations Search for a radio station manually Press / repeatedly until the frequency of target radio station is displayed. Note •• For optimal reception, fully extend the antenna and adjust its position. •• You can store a maximum of 20 FM radio stations. Switch to FM mode Store radio stations automatically Press and hold until [Auto] is displayed. »» After the search is complete, the first stored radio station is broadcast.
Display RDS information Radio Data System (RDS) is a service that allows FM stations to transmit additional information. When you tune to an FM radio station that transmits RDS signals, the station name is displayed. 1 2 Tune to an RDS station. Press repeatedly to scroll through the following information (if available): • Station name • Radio text • Program type such as [NEWS] (news), [SPORT] (sport), [POP M] (pop music)...
7 Listen to DAB radio stations 4 Press / press the to select a station, and then knob to start listening. Tip •• You can re-scan to update the list of stored stations (see 'Re-scan for stations' on page 13). Note •• You can tune to a station manually (see 'Tune to a station manually' on page 13). •• For optimal reception, fully extend the antenna and adjust its position. •• You can program a maximum of 20 DAB radio stations. •• Check with local retailer or go to www.WorldDAB.
Tune to a station manually Note •• If you store a radio station with the sequence number of another one, the earlier one is overwritten. Display DAB information The name of current DAB station is displayed. You can also view the other information. To cycle through available information, press repeatedly. • Dynamic label segment (DLS) • Signal strength • Program type (PTY) • Ensemble name • Frequency • Signal error rate • Bitrate codec 2 Press and hold DAB menus. Press / the menus.
Remove invalid stations Some stations in the list have no service when you travel to another area. In front of the station name of an invalid station, a question mark (?) is displayed. 1 2 3 Press to access the sub-menus. Press / repeatedly to select an option. • [No]: Return to the previous menu. • [Yes]: Remove invalid stations from the station list. Press to confirm the option. System menus 1 2 • 14 Press to access system menus. Press / repeatedly to select a submenu.
8 Play audio via Bluetooth With this product, you can stream audio from a Bluetooth player. An application Philips DigitalRadio is available on Apple App Store and Google Play. To fully enjoy features of this product, download and install the application to your smart device. Note •• WOOX Innovations does not guarantee the compatibility with all Bluetooth devices. Connect a device 1 2 On your device, search for Bluetooth devices. In the device list, select ORT2300.
Control play If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the device through the system. If the device also supports Audio Video Remote Control Profile (AVRCP) profile, you can control play on this product. 1 2 Play a track on the connected device. Control play on this product. • To pause or resume play, press PRESET/ . • To skip to the previous or next track, press / .
9 Listen to an external device You can also listen to an external audio device, for example, MP3 player, through this product. 1 2 3 Press SOURCE repeatedly to switch the source to [AUX IN]. »» AUX is highlighted. Connect an audio input cable with a 3.5 mm connector on both ends to • the AUDIO-IN socket on the back panel of this product, and • the headphone socket on the external device. Play audio on the external device (refer to its user manual).
10 Charge your devices Connect your device to the USB socket on the back of the product. »» Once the device is recognized, the charging starts. Note •• WOOX Innovations does not guarantee the compatibility of this product with all devices. socket is for charging only.
11 Use the sleep timer You can set a time period after which the product switches to standby mode automatically. Press SLEEP repeatedly to select a time period (in minutes). »» When the sleep timer is activated, appears. »» After the set period, the product switches to standby mode. • To deactivate the sleep timer, press SLEEP repeatedly until [Sleep off] appears.
12 Use the countdown timer You can set a time period after which the product buzzes. 1 2 3 4 Press and hold TIMER until »» The hour digits blink. Press / repeatedly to set the hour, and then press to confirm. »» The minute digits blink. Press / repeatedly to set the minute, and then press to confirm. »» The second digits blink. Press / repeatedly to set the second, and then press to confirm. »» stops blink. • 20 blinks. EN To stop the buzzer, press TIMER or the power and volume knob.
13 Adjust volume • • To increase the volume, turn the power and volume knob clockwise. To decrease the volume, turn the power and volume knob anti-clockwise.
14 Use system menus 4 Use the system menus to • check the version of current software of this product, • upgrade the software, and • reset the product to factory default status. Reset the product Check the current software version Press to display the version of current software. Upgrade the software 1 2 3 22 Go to www.philips.com/support. Search for support information about this product with "ORT2300C/10" as the keyword.
15 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact the Consumer Care, make sure that the product is nearby and the model number and serial number are available.
16 Product information Note Speakers Speaker Impedance Speaker Driver Sensitivity 4 Ohm 3" full range > 82 dB/m/W •• Product information is subject to change without prior notice. Amplifier General information AC power adaptor Operation power consumption Dimensions: - Main unit (W x H x D) Weight: - Main unit Model No.: OH1015E0592000U1 Brand name: Philips Input: 100-240 V~, 50/60Hz, 350 mA; Output: 5.9 V 2 A 10 W 245 x 123 x 122 mm 1.
17 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Compliance This product complies with the radio interference requirements of the European Community. Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.You can find the Declaration of Conformity on www.philips.com/support.
2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. ORT2300_10_UM_V2.