User Manual

ManualsBrandsPhilips Manualsaudio & home theatrePD7015/12

PD7015 Firmware Upgrade Instruction

There are two firmware upgrades available for this product.

One is the firmware for DVD and the other is for DVB-T. Read the steps carefully

for upgrade.

Preparation for the upgrade:

You will need the following:

• A PC with an archive utility that supports the ZIP-format (e.g. WinZip for

Windows); and supports CD-burning function.

• For upgrading firmware for DVD: An empty CD-R.

• For upgrading firmware for DVB-T: A USB flash device. An empty one is

advised to avoid a crash among files.

Note: Make sure the USB flash device is formatted with FAT32 file system.

Important:

• Do not rename the downloaded files.

• Do not switch off the device during firmware upgrade. Otherwise the device

would be damaged.

Download the firmware files into the computer:

1. Click on the Download icon to download the firmware package to your

computer.

2. Extract/unzip the downloaded folder.

There will be two folders:

• The files inside the folder “DVD” are for upgrading the firmware for DVD.

• The file inside the folder “DVB-T” is for upgrading the firmware for DVB-T.

Summary of content (5 pages)

PAGE 1
PD7015 Firmware Upgrade Instruction There are two firmware upgrades available for this product. One is the firmware for DVD and the other is for DVB-T. Read the steps carefully for upgrade. Preparation for the upgrade: You will need the following: • A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows); and supports CD-burning function. • For upgrading firmware for DVD: An empty CD-R. • For upgrading firmware for DVB-T: A USB flash device.
PAGE 2
(A) To upgrade firmware for DVD: 1. Inside the folder “DVD”, there are three files: • build.img • SWAP.BIN • update.ver Burn all files into an empty CD-R. Note: Do not put the files in any folder. Tip: In order to ensure upgrade files to be recognized, it is recommend to burn some other non-media files into the CD-R. 2. Switch on the device. 3. Press SOURCE button to select DVD mode. 4. Load the CD-R. 5. When the upgrade files are detected by the device, the following pop-up box appears.
PAGE 3
6. Select [OK] to start the upgrade process. 7. When firmware upgrade is completed, the device restarts and then switches to DVD mode automatically. (B) Instruction to upgrade the firmware for DVB-T 1. Inside the folder “DVB-T”, there are two files: • flash.bin • usb_upgrade_all_ flash.bin Copy the files and paste them in the root directory of the USB flash device. Note: Do not put the files in any folder. 2. Switch on the device. 3. Press SOURCE button to select DVB-T mode. 4.
PAGE 4
5. On the remote control, press SETUP button, and then select [System]. 6. Select [Software Update] > [USB Upgrade]. 7. Press RIGHT button and select the upgrade files (That is, the .bin file). 8. Press ENTER button to confirm.
PAGE 5
9. The device would restart automatically first; then the firmware upgrade process starts automatically. 10. When firmware upgrade is completed, the device restarts and enters DVBT mode automatically.