Always there to help you Register your product and get support at www.philips.com/welcome PD9015 Question? Contact Philips User manual Benutzerhandbuch 3 79 Brugervejledning 41 Gebruiksaanwijzing 119 Mode d'emploi 157 Manuale utente 197 Manual del usuario 235 Användarhandbok 273 PD9015_12_UM_Book1_V2.0.
1 Important Safety and notice 5 5 Safety 5 Compliance 7 Care of the environment 7 Copyright 9 Warranty 9 2 Your new player 10 What's in the box 10 Overview 11 3 Get started 16 Charge power 16 Install remote control battery 18 Switch on/off 18 Select OSD language 19 4 Play discs 21 Play options 21 Parental control 24 Screen saver 25 Connect additional equipment 25 DVD Settings 26 PD9015_12_UM_Book1_V2.0.
5 Watch digital TV and listen to the radio 28 Connect TV antenna 28 First-time setup 29 Turn in to TV/ radio stations 30 Setup 33 6 Play from USB 37 7 Product information 38 8 Troubleshooting 39 4 EN PD9015_12_UM_Book1_V2.0.
Important Eng lis h 1 Safety and notice Read and understand all instructions before you use this product. If damage is caused by failure to follow the instructions, the warranty does not apply. Safety Only use attachments/accessories specified by the manufacturer. The product shall not be exposed to dripping or splashing. Do not place any sources of danger on the product (e.g. liquid filled objects, lighted candles).
Modification of the product could result in hazardous radiation of EMC or other unsafe operation. Warning •• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• •• •• •• •• •• Never remove the casing of this product. Never lubricate any part of this product. Never place this product on other electrical equipment. Keep this product away from direct sunlight, naked flames or heat.
Eng lis h Compliance This product complies with the radio interference requirements of the European Community. This apparatus includes this label: Note •• The type plate is located on the bottom of the product. Care of the environment Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
Eng lis h Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.
2 Your new player On PD9015, you can do the following: • You can play the following discs (including CD-R, CD-RW, DVD±R and DVD±RW): • DVD-Video, Video CD, Audio CD, MP3 CD, Discs with JPEG files; • Receive digital TV/ radio programs from the the Digital Video Broadcasting (DVB-T) services; • Play media that you store on the USB mass storage device.
Eng lis h Overview Main unit k j i a h b c g d e f a •ON OFF• • Slide to switch the player on/ off. b DC IN 12V • Power supply socket c PHONE • Headphone jack d AV OUT • Audio/video output jack e USB • Connector for USB devices PD9015_12_UM_Book1_V2.0.
f Antenna jack g CHR/IR • Charging indicator/Remote control sensor h (CH+), (CH-), , Navigates menus. (CH+), (CH-) • DVB-T: Switches to the next or previous channel. , • DVD/USB: Searches backward/forward at different speeds. OK/ • Confirms an entry or selection. • DVD/USB: Starts, pauses or resumes play. i OPEN • Opens the disc compartment. j SETUP • Accesses or exits the setup menu. SOURCE • Switches between DVD, DVB-T and USB. DVD MENU • For DVD, accesses or exits disc menu.
Remote control Eng lis h x w a v u b t c s r d q e p o f n g m l h k i j a • Switches the player on from standby or back to standby. b LCD ON/OFF • Switches on/off the screen. c (CH+), (CH-), , Navigates menus. (CH+), (CH-) • DVB-T: Switches to the next or previous channel. , • DVD/USB: Searches backward/forward at different speeds. OK/ • Confirms an entry or selection. • DVD/USB: Starts, pauses, or resumes play.
e f g h • / Increases or decreases volume. • Mutes or restores volume. 0-9 • Numeric keypad • DVD: (For VCD, PBC on) Return to the PBC menu. DVB-T: Returns to the previous channel; renames channels in Program Edit menu. USB: Returns to the previous folder. • • DVD/USB: Zooms in or out a picture/video image. DVB-T: Adjusts screen aspect ratio. • • i ANGLE • DVD: Selects a different viewing angle of a DVD. j PROG • DVD: Program tracks. k REPEAT • DVD/USB: Repeats a chapter/track/title.
EPG • DVB-T: Toggles the Electronic Program Guide (EPG) on or off. Enabled on digital channels only. q INFO • DVD/USB: Displays play information, if available. • DVB-T: Displays program information, if available. r FAV • DVB-T: Accesses or exits the favorite channel list. s LIST • DVB-T: Displays the list of channels. t RADIO (TV) • DVB-T: Switches between radio and TV. u EXIT/ • DVD/USB: Stops play. • DVB-T: Goes to the previous menu. v SOURCE • Switches between DVD, DVB-T and USB.
3 Get started Caution •• Use the controls only as stated in this user manual. •• Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your player. The model number and serial number are on the bottom of your player. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Charge power Charge through the AC adaptor Caution •• Risk of product damage.
Eng lis h 2 On the main unit, slide the •ON OFF• switch to the OFF position. • Alternatively, press on the remote control to switch to standby mode. »» The CHR indicator turns on (red). »» When the battery is fully charged, the CHR indicator turns off. Tip •• To maximize battery life, recharge the battery immediately once the battery is fully discharged. If you do not use the player for a long time, fully recharge the battery once every two months.
Install remote control battery Caution •• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. •• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. •• Batteries contain chemical substances, they should be disposed of properly. •• Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Eng lis h »» The CHR indicator turns on (green). 2 To switch off, slide •ON OFF• to the OFF position on the main unit. • Alternatively, press on the remote control to switch to standby mode. »» The CHR indicator turns on (red).The battery charging starts. »» When the battery is fully charged, the CHR indicator turns off. Auto standby In DVB-T mode or USB mode, if there is no button press or media play on the playerfor three hours, the player switches to standby mode to save power.
In DVB-T mode 1 2 3 4 20 Press SETUP. »» The setup menu is displayed. Go to [Option] > [OSD Language]. Press / to select a language. Press SETUP to exit. EN PD9015_12_UM_Book1_V2.0.
1 2 3 Play discs Eng lis h 4 Slide OPEN on the player. »» Remove the protective card, if you use the player for the first time. Insert the disc with label side facing up. Push down to close the disc compartment. »» Play starts automatically. If not, press OK/ • • • • • . If a menu is displayed, select an item, then press OK/ to start play. To pause, press OK/ . Press again to resume play. To stop, press EXIT/ . To select the previous/next item, press or .
1 2 3 4 5 During play, press PROG on the remote control. »» The program menu is displayed. Enter the corresponding number of the title/chapter/track with the numerical keys (0-9). Select Add to Program and press OK to confirm. Repeat steps 2-3 to program other title/chapter/track. To play the program, select [Play] and then press OK to confirm. • To exit the program menu, press PROG once. • To clear the program, select [Clear Program] and then press OK to confirm.
1 2 3 Eng lis h Search by time or title/chapter/track number During video/audio play, press GO TO. Enter the selected time or number. • In the title/chapter/track field, enter the title/chapter/track number. • In the time field, enter the play position in sequence of hour, minute, and second. Press OK. »» Play starts automatically at the selected point. To skip to any title/chapter/track directly, • During play, enter the corresponding number of the title/chapter/track with the numerical keys (0-9).
Zoom For DVD, VCD and JPEG CDs, you can zoom into or out of an image. 1 2 Press repeatedly to zoom into or out of an image. When the image is enlarged, press / / / to pan through it. Rotate pictures For JPEG CDs only. While the JPEG is displayed: • Press to rotate counter-clockwise. • Press to rotate clockwise. • Press to flip up/down. • Press to flip left/right.. Parental control Restrict access to discs that are unsuitable for children. These types of discs must be recorded with ratings.
1 2 3 4 5 6 7 Eng lis h Change the password Press SETUP. Select [Rating] > [Set Password], press OK. »» Password menu is displayed. Enter your current password, and then press OK to confirm. • The default password is 6666. Press OK. Enter your new 4-digit password, and then press OK to confirm. Enter the new password again, and then press OK to confirm. Press SETUP to exit. Screen saver From the Home screen, go toSETUP. Select [Misc] > [Screen saver]. Press / to switch on screen saver.
Caution •• Turn off your player before you connect it to any additional equipment. You can connect the player to a TV or an amplifier to enjoy the video/ audio play. R L VIDEO IN Match the color of the AV cables with the jacks: • the yellow cable is for the yellow video jack • the red/white cable is for the red/white audio jacks. DVD Settings To maximize your DVD play experience, use SETUP to fine tune your settings. 1 2 26 Press SETUP. »» The setup menu is displayed.
3 4 Press Eng lis h [Audio] • [Night Mode]: Select quiet or full dynamic sound. • [Smart Sound]: Select a sound effect for music. [Rating] • [Parental control]: Select a parental level. • [Set Password]: Change existing password (6666 by default). [Misc] • [Use Default Settings]: Restore default settings. • [Screen saver]: Activate/deactivate screen saver. to go back to the previous menu. Press SETUP to exit. PD9015_12_UM_Book1_V2.0.
5 Watch digital TV and listen to the radio Note •• Before you start, make sure that you have connected the antenna to the player. •• Make sure that you are in an area with sufficient DVB-T signal coverage. You can check the signal coverage with the TV/radio broadcast authority of your country or visit www.philips.com/support. Connect TV antenna To watch HDTV programs on the player, connect one of the TV antennas to the player: • the supplied antenna, or • your home antenna.
1 2 3 4 Press SOURCE to switch to DVB-T mode. »» An Installation Guide menu is displayed, when you use the player for the first time. In [OSD Language], press / In [Country], press to select the county of your current location. / Eng lis h First-time setup to select an OSD language. Select [Channel Search], then press OK to confirm. »» Auto channel search starts. »» When the auto channel search is complete, the first TV service starts to play.
Manual search You can search TV channels manually. 1 2 3 4 Press SETUP. Select [Channel Search] > [Manual Search]. Press / to select a channel number, or enter the channel number with the numerical keys. Press OK to confirm. Turn in to TV/ radio stations 1 2 Press SOURCE to switch to DVB-T mode. Press RADIO (TV) to select radio or TV mode. • To change the volume, press / . To change channels, • press CH+/CH-. Or • Enter the channel numbers with the numeric keys.
Eng lis h 3 4 5 Select the channel, and press the red button. Press / to move the channel up or down. Press OK to confirm. Manage channel Select the channel, and then follow the onscreen instructions. • To skip the channel, press the green button. • To lock the channel, press the yellow button. • To delete the channel, press the blue button. Press OK to confirm. • Press FAV to add the channel to the favorite list. To delete from your favorite list, press FAV again. • To rename the channel, press .
Set time 1 2 Press SETUP. Select [Time]. To select time setting mode: 1 2 Select [Time offset]. Press / to select an option, then press OK to confirm. • [Auto]: The time zone is updated automatically according to the broadcasted TV channel. • [Manual]: Set your time zone manually. To set time zone: 1 2 3 4 Select [Time offset]. to select [Manual]. Press Select [Time Zone]. Press / to select a time zone.
6 Press / Press / to select a channel. to select a program. Eng lis h 3 4 5 Press OK. »» The brief information of this program is displayed. Follow the onscreen instructions. • To switch programs to the previous/next day, press the red/yellow button. • To view the programs information in the previous/next page, press green/blue button. To exit the EPG menu, press EPG. Setup You can change the setup options of the player. 1 On the remote control, press SETUP. »» The setup menu is displayed.
Program [Program Edit]: Edit the list of services. You can change the sequence of the services, change the service names, and lock, skip, and delete some services. [EPG]: Check the program information and schedules. [Sort]: Sort the list of services in different ways. [LCN]: Select whether to keep the logical channel numbers of the services. To re-assign channel numbers to the services, switch off [LCN]. Picture [Aspect Ratio]: Select display aspect ratio.
[Parental Guidance] you can set password to programs with age restrictions. • Enter your password to select an age level (000000 by default). [Set Password] Set or change the password that you use in [Program Edit], [Parental Guidance] and [Restore Factory Default]. Eng lis h System Tip •• If you forget your last saved password, you can enter 888888 to unlock. Then, you can enter a new password. [Restore Factory Default] You can reset your player settings to the original factory settings.
3 Follow onscreen instructions to complete the update. »» When the update is complete, the playerswitches back to Installation Guide automatically. Caution •• Keep the playerpowered on and the storage device mounted before the firmware update is complete. 36 EN PD9015_12_UM_Book1_V2.0.
Play from USB You can play VOB, MP3, AVI or JPEG files that are stored on a USB storage device. 1 2 3 4 Eng lis h 6 Connect the USB storage device to the player. Press SOURCE to switch to the USB mode. »» The content browser is displayed. Select a category (Music/Photo/Movie), then press OK/ Select a file/folder, then press OK/ »» Play starts. . . »» Follow the onscreen instructions. 5 To stop play, press PD9015_12_UM_Book1_V2.0.indb 37 .
7 Product information Note •• Product information is subject to change without prior notice. Dimensions Weight AC power adaptor Power supply Operating temperature range Laser wavelength Video output Format Output level Load impedance Audio line out Audio out (analog audio) Load impedance Audio distortion + noise Frequency response Signal/noise ratio 239 x 39 x 178 mm 1.1 kg DC120150110 (Philips) Input: 100-240V~ 50/60Hz 0.6A max 1.
Troubleshooting Eng lis h 8 No power •• Ensure that both plugs of the mains cord are properly connected. •• Ensure that there is power at the AC outlet. •• Check if the built-in battery is drained. No sound • Ensure that the AV cable is connected correctly. No response to the remote control •• Ensure that the path between the remote control and the player is clear from obstacles. •• From a close distance, point the remote control directly at the player. •• Replace the remote control batteries.
No/weak signal displayed on the screen •• TV signal is too weak or out of TV signal covering area. •• Make sure you are in an area with sufficient coverage. •• Connect to your home TV antenna socket. •• Receiving TV in a driving car may cause signal problems. TV reception with Black and White picture or no sound •• Ensure that you set the TV format correctly according to local TV broadcast specifications. If you do not know the information, contact local TV broadcast authorities for help.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. PD9015_12_UM_V2.0 PD9015_12_UM_Book1_V2.0.
