Always there to help you Register your product and get support at www.philips.
Table des matières 1 Important 117 Sécurité et remarques 117 Sécurité 117 Conformité 119 Protection de l'environnement 119 Droits d'auteur 121 Garantie 122 2 Votre lecteur de DVD portable 123 Contenu de l'emballage 123 Présentation de l'unité principale 124 Présentation de la télécommande 126 3 Mise en route 128 Préparation 128 Fixation du lecteur dans votre voiture (pour utilisation en voiture) 131 Mise sous/hors tension 133 Sélection d'une langue OSD 134 4 Lire de la musiqu
5 Réglage de l'unité principale 139 6 Informations sur le produit 140 7 Dépannage 141 116 FR
1 Important Sécurité et remarques Assurez-vous d'avoir bien lu et compris l'ensemble des instructions avant d'utiliser ce produit. Si le produit est endommagé suite au non respect de ces instructions, la garantie ne s'appliquera pas. Utilisez uniquement les pièces de fixation/accessoires spécifié(e)s par le fabricant. Votre produit ne doit pas être exposé à des fuites ou éclaboussures.
Toute modification apportée au produit peut provoquer des rayonnements électromagnétiques dangereux ou toute autre situation dangereuse. Avertissement •• Si la prise d'alimentation ou un coupleur d'appareil est utilisé(e) comme dispositif de découplage, celui-ci doit rester facilement accessible. Avertissement •• •• •• •• •• •• Ne retirez jamais le boîtier de ce produit. Ne graissez jamais aucun composant de ce produit. Ne posez jamais le produit sur un autre équipement électrique.
Conformité Ce produit est conforme aux spécifications d'interférence radio de la Communauté Européenne. Cet appareil présente l'étiquette suivante : Remarque •• La plaque signalétique est située sous le produit. Informations sur l'environnement Tout emballage superflu a été supprimé. Nous avons fait notre possible pour permettre une séparation facile de l'emballage en trois matériaux : carton (boîte), polystyrène moussé (qui amortit les chocs) et polyéthylène (sacs, feuille protectrice en mousse).
Cet appareil a été conçu et fabriqué avec des matériaux et des composants de haute qualité pouvant être recyclés et réutilisés. La présence du symbole de poubelle sur roues barrée sur un produit indique que ce dernier est conforme à la directive européenne 2002/96/CE. Veuillez vous renseigner sur votre système local de gestion des déchets d'équipements électriques et électroniques. Respectez la réglementation locale et ne jetez pas vos anciens appareils avec les ordures ménagères.
Droits d'auteur Ce produit intègre une technologie de protection des droits d'auteur protégée par des brevets américains et autres droits relatifs à la propriété intellectuelle détenus par Rovi Corporation. La rétro-ingénierie et le démontage sont interdits. Les spécifications mentionnées dans le présent manuel sont susceptibles d'être modifiées sans notification préalable. Les marques commerciales sont la propriété de Koninklijke Philips Electronics N.V. ou de leurs détenteurs respectifs.
Garantie • • • • Ne tentez en aucun cas de réparer le produit car vous pourriez vous blesser ou causer des dommages au produit et entraîner l'annulation de votre garantie. Utilisez le produit et les accessoires uniquement de la manière prévue par le fabricant. Le message d'avertissement imprimé à l'arrière du produit signale un risque d'électrocution. Ne retirez jamais le couvercle du produit. Confiez toujours l'entretien et les réparations au service après-vente Philips.
2 Votre lecteur de DVD portable Félicitations pour votre achat et bienvenue chez Philips ! Pour bénéficier de tous les avantages de l'assistance Philips, enregistrez votre produit à l'adresse www. philips.com/welcome. Introduction F ra n ça is Ce lecteur de DVD portable lit des disques vidéo numériques conformes à la norme DVD universelle.
• • • Câble AV Support de fixation voiture Mode d'emploi Présentation de l'unité principale j q k a b c d e f g i h a • Permet d'allumer/éteindre le lecteur de DVD. SOURCE • Permet de basculer entre les sources DISC et USB. SETUP • Permet d'accéder au menu de configuration système ou de le quitter. OPTIONS • permet d'accéder aux options relatives à l'activité ou à la sélection actuelle. • Permet d'accéder au menu de configuration système ou de le quitter.
DISC MENU • Pour les DVD, permet d'accéder au menu du disque ou de le quitter. • Pour les VCD, permet d'activer ou de désactiver le mode PBC (contrôle de lecture). • Pour les VCD version 2.0 ou les SVCD avec le mode PBC activé, permet de revenir au menu en cours de lecture. , • Pour passer au titre, au chapitre ou à la piste précédente ou suivante. b DC IN • Prise d'alimentation. c AV OUT • Sortie audio/vidéo. e • Prise casque. • Permet de brancher un périphérique de stockage USB.
Présentation de la télécommande a b c d SOURCE n e m OPTIONS f g l k h i j a SOURCE • Permet de basculer entre les modes DISC et USB. b DISPLAY • Permet d'afficher les informations de lecture. c • 126 FR Permet de régler la luminosité du rétroéclairage de l'écran.
d MENU • Pour les DVD, permet d'accéder au menu du disque ou de le quitter. • Pour les VCD, permet d'activer ou de désactiver le mode PBC (contrôle de lecture). • Pour les VCD version 2.0 ou les SVCD avec le mode PBC activé, permet de revenir au menu en cours de lecture. • Pour les périphériques USB, permet d'accéder au menu des fichiers ou de le quitter. e A-B • Permet de marquer la section à répéter. f OPTION • permet d'accéder aux options relatives à l'activité ou à la sélection actuelle.
3 Mise en route Attention •• Utilisez les commandes conformément aux consignes de ce manuel d'utilisation. •• Les instructions fournies dans ce chapitre doivent être suivies dans l'ordre énoncé. Si vous contactez Philips, vous devrez préciser les numéros de modèle et de série de votre lecteur. Les numéros de série et de modèle sont indiqués sous votre appareil.
2 À l'aide de l'adaptateur secteur fourni, branchez le lecteur sur la prise secteur. »» Le voyant CHR s'allume (rouge). »» Lorsque que la batterie est entièrement chargée, le voyant CHR s'éteint. complètement déchargée. Si vous n'utilisez pas le lecteur pendant une longue période, rechargez la batterie une fois tous les deux mois. Charge via l'adaptateur allume-cigares Connectez l'adaptateur allume-cigares fourni au lecteur et à l'allume-cigare.
Installation de la pile de la télécommande Attention •• Risque d'explosion ! Tenez les batteries à l'abri de toute source de chaleur, des rayons du soleil ou du feu. Ne jetez jamais vos batteries dans le feu. •• Risque d'explosion si les piles ne sont pas remplacées correctement. Remplacer uniquement par le même type de pile. •• Les piles contiennent des substances chimiques : elles doivent être mises au rebut de manière adéquate.
1 2 3 Fixation du lecteur dans votre voiture (pour utilisation en voiture) Utilisez le kit de fixation voiture pour fixer le lecteur sur l'appuie-tête d'un siège de votre voiture. A B C D Avertissement •• Lorsque vous n'utilisez pas le lecteur de DVD, retirez le kit de fixation et le lecteur de DVD du siège. Fixer le lecteur de DVD sur l'appuie-tête 1 Placez le support de fixation sur l'appuie tête des sièges avant. FR 131 F ra n ça is A. Vis de fixation pour lecteur de DVD B.
a Placez le support sur les barres de l'appuie-tête. b Serrez la vis pour fixer solidement le support aux barres. 2 Accrochez le support de fixation du DVD au lecteur de DVD portable : a Insérez la vis de fixation du support dans l'écrou de vis à l'arrière du lecteur de DVD. b Vissez bien le lecteur de DVD au support. Le support comporte trois trous. Utilisez celui que vous voulez.
4 • Attachez le support de DVD au support de fixation de l'appuie-tête Réglez l'angle de vue. a Desserrez la vis de réglage. b Réglez l'angle de vue comme vous le souhaitez c Serrez la vis. Retirer le lecteur de DVD de l'appuie-tête • Appuyez sur le bouton de déverrouillage. 1 F ra n ça is Mise sous/hors tension Appuyez sur pour allumer le lecteur. »» Le voyant s'allume (vert).
2 Pour éteindre le lecteur, appuyez sur »» Le voyant s'éteint. . Sélection d'une langue OSD Vous pouvez sélectionner une langue différente pour le texte affiché à l'écran. 1 2 3 4 5 Appuyez sur la touche SETUP. »» Le menu de configuration s'affiche à l'écran. Accédez à [Général] > [Language]. Appuyez sur Appuyez sur / pour sélectionner une langue. /OK pour confirmer. Appuyez sur la touche SETUP pour quitter.
4 Lire de la musique ou des films Lecture de disques 1 2 3 Faites glisser le bouton OPEN du lecteur. Insérez le disque, face imprimée orientée vers le haut. Refermez le logement du disque. »» La lecture démarre automatiquement. Si rien ne se produit, appuyez sur /OK. • • • • • Si un menu s'affiche, sélectionnez une option, puis appuyez sur /OK pour démarrer la lecture. Pour suspendre la lecture, appuyez sur /OK. Appuyez de nouveau pour reprendre la lecture.
Répétition d'un passage Vous pouvez répéter un passage spécifique audio/vidéo au sein d'un titre, d'un chapitre ou d'une piste (Répéter A-B). 1 2 Pendant la lecture, au point de départ choisi, appuyez sur A-B. »» [ A] s'affiche. Au point final, appuyez de nouveau sur A-B. »» [ AB] s'affiche. »» Le passage sélectionné est lu en boucle. 3 Appuyez sur A-B pour annuler. Zoom Les DVD, VCD et CD d'images JPEG permettent de réaliser des zooms avant et arrière dans les photos ou les images vidéo.
Conseil •• Pour optimiser le temps de lecture, sélectionnez [Dim]. •• Pour des performances visuelles optimales, sélectionnez [High]. Connexion d'un équipement auxiliaire Vous pouvez connecter le lecteur à un téléviseur ou à un amplificateur pour lire un DVD. Attention •• Éteignez votre lecteur avant de le connecter à tout équipement auxiliaire. Vous pouvez connecter le lecteur à un téléviseur ou à un amplificateur pour lire un DVD.
Lecture à partir d'un périphérique USB Vous pouvez lire des fichiers DivX, VOB, MP3 et JPEG stockés sur un périphérique de stockage USB. 1 2 3 4 Connectez le périphérique USB au lecteur. »» Le menu du contenu s'affiche à l'écran. Appuyez sur SOURCE pour passer en mode USB. Sélectionnez un fichier, puis appuyez sur »» La lecture commence. Pour arrêter la lecture, appuyez sur STOP. 138 FR .
5 Réglage de l'unité principale Pour profiter de toutes les options de lecture, utilisez SETUP pour affiner vos réglages. 2 Appuyez sur la touche SETUP. »» Le menu de configuration s'affiche à l'écran. Utilisez les touches de navigation pour sélectionner une option, puis appuyez sur /OK pour confirmer. [Général] [Language] [Réglages PBC] [Économie] [DivX (VOD)] [Sous-titre DivX] [DVD Parental] [Déf.
3 4 Appuyez sur pour revenir au menu précédent. Appuyez sur la touche SETUP pour quitter. 6 Informations sur le produit Remarque •• Les informations sur le produit sont sujettes à modifications sans notification préalable.
Séparation des canaux 80 dB Gamme dynamique 80 dB 7 Dépannage Avertissement •• Risque de choc électrique. Ne retirez jamais le boîtier du lecteur. Pour que votre garantie reste valide, n'essayez jamais de réparer le système vousmême. En cas de problème lors de l'utilisation du lecteur, vérifiez les points suivants avant de faire appel au service d'assistance. Si le problème persiste, enregistrez votre lecteur et accédez à l'assistance sur www.philips.com/support.
•• La fabrication de l'écran LCD repose sur une technologie de haute précision. Il est toutefois possible que de minuscules points noirs et/ou brillants (rouges, bleus, verts) apparaissent. Ce phénomène est tout à fait normal et ne révèle pas un dysfonctionnement. Lecture du disque impossible •• Assurez-vous que la face imprimée du disque est orientée vers le haut. •• Nettoyez le disque. Essuyez le disque du centre vers l'extérieur à l'aide d'un chiffon propre, doux et non pelucheux.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. PD9030_12_UM_ERP_V2.