User's Manual

22 Philips · HFC 325
EN
Technical Data
Dimensions
Dimensions (L¦×¦H¦×¦W) ...................355¦×¦102¦×¦244¦mm
Weight
Weight ...................................................................2,5¦kg
Mains Connection
Mains Connection.................. 100¦–¦240¦V¦~ / 50¦–¦60¦Hz
Power Consumption
Power Consumption
Stand-by Mode
Stand-by Mode..................................................<¦2¦W
Transmission
Transmission ...................................................<¦27¦W
Recommended Amb ient
Recommended Ambient....................................5¦–¦35¦ºC
Relative Humidi ty
Relative Humidity ............... 15¦–¦85¦% (non-condensing)
Connection Type
Connection Type......................................PSTN · PABX
Dialling Mode
Dialling Mode Tone / pulse dialling (country dependent)
Standards
Safety EN 60950-1
Safety........................................................... EN¦60950-1
Emissions EN 55022 Class B
Emissions ........................................... EN¦55022 Class B
Immunity to El ectrical Noise EN 55024
Immunity ........................................................EN¦55024
Scanner
Type Black-and-White
Type..............................Black-and-White · 16 grey tones
Scan Width
Scan Width ........................................................212¦mm
Horizontal Resolution
Horizontal Resolution ....................................8 dots/mm
Vertical Resolution Standard
Vertical Resolution ..................... Standard: 7,7 lines/mm
Vertical Resolution Fine
................................................... Fine: 15,4 lines/mm
Printer
Type Thermal printing
Type.............. Thermal printing · Type Black-and-White
Printing paper Thermal paper roll
Printing paper.....................................Thermal paper roll
Memory
Telephone Book
Telephone Book ..................................... up to 50 entries
Document Feed Slot
Capacity
Capacity ............................................................10 sheets
Width
Width........................................................148¦–¦210¦mm
Length
Length.......................................................100¦–¦600¦mm
Thickness
Thickness ................................................0,06¦–¦0,15¦mm
Weight
Weight ........................................................ 60-120¦g/m²
Fax
Type Group 3
Type.................................................................. Group 3
Compatibility
Compatibility ...............................................ITU-T¦T.30
Data Compression
Data Compression...........................................MH · MR
Modulation
Modulation ................................... V.21 · V.27ter · V.29
Transfer Speed
Transfer Speed..................................................9.600¦bps
Copier
Type Black-and-White
Type..............................Black-and-White · 16 grey tones
Subject to Change
Technical specifications subject to change with-
out notice.
Guarantee
(Terms and Conditions for United King-
dom only)
In order to supply the guarantee, you should contact your
dealer or Sagemcom Helpdesk. The proof of purchase will be
required.
Please make usage of your equipment for the purpose for
which it was designed and under normal usage conditions.
Sagemcom do not accept any liability for any usage made out
of the frame of its original designed purpose and any conse-
quence that may arise from this usage.
Should any malfunctioning arise, the dealer or Sagemcom
Helpdesk will advise you what to do.
A) General Guarantee Conditions
Sagemcom undertakes to remedy by repair or exchange at its
own convenience, free of charge for labour and replacement
parts, any defects in the equipment during the guarantee
period of 12—twelve—months (3—three—months for
accessories), from the date of original invoice of the Equip-
ment, where those defects are a result of faulty workmanship.
Unless the customer has concluded with Sagemcom a main-
tenance contract in respect of the equipment which specifi-
cally provides for repairs to be carried out at the customer's
premises, the repairs will not be carried out on the equipment
at the customer premises. The customer must however return
the defective equipment at his/her own expense, to the
address given by the dealer or Sagemcom Helpdesk.
In case a product needs to be sent in for a repair, it always has
to be accompanied by a proof of purchase (which is not
altered, written on or in any way be made illegible) showing
that the product is still under warrantee. In case no proof of
purchase is enclosed, the Sagemcom repair center will use the
production date as a reference of establishing the warrantee
status of the product.
Apart from all legal obligatory rules, Sagemcom, do not give
any Guarantee, either implicit or explicit which is not set
force in the present section, and could not be hold responsi-
ble for any direct or indirect, material or immaterial damage,
in or out of the frame of the present guarantee.
If any provision of this guarantee shall be held to be in whole
or in part invalid or illegal due to an obligatory rule applica-
ble to consumers pursuant to their national legislation, such
invalidity or illegality shall not impair or affect the remaining
provisions or parts of this guarantee.
This guarantee does not affect the Customer statutory rights.
B) Exclusions From Guarantee
Sagemcom shall have no liability under the guarantee in
respect of:
•) Damage, defects, breakdown or malfunction due to one or
more of the following:
– Failure to properly follow the installation process and
instructions for use
– An external cause to the equipment (including but not lim-
ited to: lightening, fire, shock, vandalism, inappropriate con-
ditions of electrical network or water damage of any nature)
– Modifications made without the written approval of
Sagemcom
– Unsuitable operating conditions, particularly of tempera-
ture and humidity
– Repair or maintenance of the equipment by persons not
authorized by Sagemcom
•) Wear and tear from normal daily use of the equipment and
its accessories
•) Damage due to insufficient or bad packaging of equipment
when returned to Sagemcom
•) Usage of new versions of software without previous
approval of Sagemcom
•) Work on any equipment or software modified or added
without the prior written consent of Sagemcom
•) Malfunctions not resulting from the Equipment or from
software installed in user workstations for the purpose of use
of the equipment.
hfc 325-manual-en-253327723-a.book Seite 22 Montag, 6. September 2010 9:34 09