User's Manual

8 Philips · HFC 325
EN
Connecting the Telephone
Cable
Connecting the Te lephone Cable
Connect the telephone cable to the device by inserting it in
the socket designated with LINE (RJ-11-Connector).
Insert the telephone plug into your PTT line socket.
Telefonkabel anschliessen
Connecting the Mains Cable
Mains Voltage a t the Site of Installation
Connecting the Mains Cable
Insert the mains cable into the connection located on the
rear side of the device. Plug the power cable into the elec-
trical outlet.
Initial Installation
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with OK.
Selecting the Country
Setting the Cou ntry Correctly
Setting the Countr y
1 Use [ to select the country in which you are operat-
ing the device.
2 Confirm with OK.
After this input, the device prints a help page and checks
the telephone line.
Entering Number
Page Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
Entering Number
1 Enter your number. Using or – you can enter a plus
sign.
2 Confirm with OK.
Entering Name
Entering Name
1 Enter your name. You can enter characters using the
numeric keys (see key labels). Enter special characters
using 0. Press the respective key several times until
the desired character or special character appears on the
display.
2 Confirm with OK.
After entering the device prints an overview of the func-
tions.
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device
(indicated on the type label) matches the mains
voltage available at the setup location.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper-
ating the device. Otherwise your device is not
adapted to the telephone network. If your coun-
try is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
Notice
Navigating in the Editor
You can move the cursor using [. Use C to
delete individual characters.
hfc 325-manual-en-253327723-a.book Seite 8 Montag, 6. September 2010 9:34 09