Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 3 3 3 3 2 Your SoundStage 4 4 5 6 3 Place your SoundStage 6 Safety Mains fuse (UK only) Care for your product Care of the environment Help and support Main unit Remote control Connectors 9 Notice 14 14 14 Compliance Trademarks 4 Connect and set up 7 Connect to TV 7 Connect audio from TV and other devices 8 5 Use your SoundStage 9 9 9 9 9 10 10 11 11 6 Update software Check software version Update software via USB 11 11 11 7 Product specifications 12 8 Troubleshoo
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Read and understand all instructions before you use your SoundStage. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
• If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. This is CLASS II apparatus with double insulation, and no protective earth provided. Mains fuse (UK only) This information applies only to products with a UK mains plug. This product is fitted with an approved molded plug. If you replace the fuse, use one with: • the ratings shown on the plug, • a BS 1362 approval, and • the ASTA approval mark.
• find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product. You can find this information on the back or bottom of your product.
c AUX/AUDIO IN Press repeatedly to switch your audio source to the AUX connection or MP3 connection (3.5mm jack). Remote control This section includes an overview of the remote control. d a b p c o n m / Skip to the previous or next track in USB mode and Bluetooth mode (only for AVRCP-supported Bluetooth devices). e BASS +/Increase or decrease bass. f VOLUME +/Increase or decrease the volume. g Mute or restore the volume. h SOUND Select a sound mode.
Connectors This section includes an overview of the connectors available on your SoundStage. Side connectors 3 Place your SoundStage This SoundStage is designed to be placed under your TV. Caution •• The SoundStage is designed for TVs that weigh no a AUDIO IN Audio input from an MP3 player (3.5mm jack). b Audio input from a USB storage device. Rear connectors ab c d e a COAXIAL IN Connect to a coaxial audio output on the TV or other devices.
2 Make sure the TV base is centered on it and not hanging over any of its edges. Tip •• If the TV base is too large to put on top of the SoundStage, place the SoundStage in another location such as on an open shelf under the TV, but keep it close to your TV so the audio cable will reach. You can also mount your TV on the wall above the SoundStage.
1 2 Using a High Speed HDMI cable, connect the HDMI OUT (ARC) connector on your SoundStage to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. On your TV, turn on HDMI-CEC operations. For details, see the TV user manual. 1 Using an optical cable, connect the OPTICAL IN connector on your SoundStage to the OPTICAL OUT connector on the TV or other device.
5 Use your SoundStage This section helps you use the SoundStage to play media from a wide range of sources. Before you start • Make the necessary connections described in Quick start guide and User manual. • Switch the TV to the correct source for the SoundStage. Adjust the volume 1 Rotate the power knob or press VOLUME +/- on remote control to increase or decrease a volume level. • To mute sound, press . • To restore the sound, press again or press VOLUME +/-.
2 3 4 5 On the Bluetooth device, switch on Bluetooth, search for and select PhilipsHTL4110B to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). Wait until you hear a beep sound from the SoundStage. »» [BT] is displayed. • The operational range between the main unit (left and right speakers) and a NFC device is approximately 10 meters (30 feet). 1 Enable NFC on your Bluetooth device (see the user manual of your device for details).
Note •• This product may not be compatible with certain types 6 Update software of USB storage device. •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •• Digital camera PTP protocols are not supported. •• Do not remove the USB storage device while it is being read. •• DRM-protected music files (MP3, WMA) are not supported. •• Support a USB port: 5V , 1A. To get the best features and support, update your product with the latest software.
6 Wait until the update is completed. »» If the update is complete, this product automatically turns off and on again. 7 Product specifications Caution •• Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this product. Note •• Specifications and design are subject to change without notice. Amplifier • • • • Total output power: 80W RMS (+/- 0.
Bluetooth •• •• Bluetooth profiles: A2DP, AVRCP Bluetooth version: 3.0 + EDR Main unit •• •• •• • • •• •• • •• Power supply: 110-240 V~, 50/60 Hz Power consumption: 20 W Standby power consumption: ≤ 0.5 W Speaker impedance: 4 ohm Speaker drivers: 2 x racetrack mid range (1.5" x 5") + 2 x 1" tweeter + 1 x 4" woofer Dimensions (WxHxD): 701 x 68 x 325 mm Weight: 6.
Bluetooth A device cannot connect with the SoundStage. • The device does not support the compatible profiles required for the SoundStage. • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. • The device is not correctly connected. Connect the device correctly. • The SoundStage is already connected with another Bluetooth device. Disconnect the connected device, then try again.
Licensing LLC in the United States and other countries. The N Mark is a trademark of NFC Forum, Inc. in the United States and in other countries.
Philips Consumer Lifestyle B.V. 2013/08 178 (Document No.) (Year, Month (yyyy/mm) in which the CE mark is affixed ) EUROPEAN DECLARATION OF CONFORMITY We, PHILIPS CONSUMER LIFESTYLE B.V.
Philips Consumer Lifestyle B.V. 2013/08 178 (Document No. / Numéro du document) (Year, Month (yyyy/mm) in which the CE mark is affixed / Année/mois (aaaa/mm) au cours de laquelle le marquage CE a été apposé) EUROPEAN DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE CE) We, PHILIPS CONSUMER LIFESTYLE B.V.
Specifications are subject to change without notice 2013 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. HTL4110B_12_UM_V2.
