Always there to help you Register your product and get support at www.philips.com/welcome Question? Contact Philips User manual Downloaded from www.Manualslib.
Downloaded from www.Manualslib.
Contents 1 Important Safety Notice 2 2 3 2 Yor navigation system 5 5 5 6 3 Get started 7 7 8 8 8 8 4 Navigation 9 9 9 11 13 15 16 16 5 Use Bluetooth devices Connect a device Make a call SMS 17 17 17 18 6 Adjust settings 19 7 Product information 20 8 Troubleshooting 21 21 Introduction What's in the box Overview of the main unit Connect power Switch the navigator on or off Use the bracket Use the touch pen For the first time use Access navigation mode Choose a destination Start navigation Se
1 Important Safety • • • • • • • • • • • • Read and understand all instructions before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. To ensure safe driving, adjust the volume to a safe and comfortable level. Use only the supplied mounting hardware for a safe and secure installation. To avoid short circuit, do not expose the apparatus to rain or water. Never insert objects into the ventilation slots or other openings on the apparatus.
• • • Be careful not to adjust the volume as your hearing adapts. Do not turn up the volume so high that you can't hear what's around you. You should use caution or temporarily discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a traffic hazard and is illegal in many areas. • • individual hardware characteristics.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
2 Yor navigation system What's in the box Check and identify the contents of your package: a The navigator b Vehicle power adaptor Introduction With the navigation system, you can: • Get a clear guidance while you are driving • Make a call or answer a call through Bluetooth c Touch pen d Bracket & holder e USB cable f Printing material EN Downloaded from www.Manualslib.
Overview of the main unit a i b c h g d f e a • Press and hold to turn on the navigator. b Indicator light • Light up when the navigator is charging. c Touch screen d Speaker e RESET • Restore default settings. f • MINI USB socket for power charging and data transfer. g Micro SD/SDHC card slot h • Headphone socket. i Touch pen 6 EN Downloaded from www.Manualslib.
3 Get started Caution •• Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No. __________________________ Serial No.
Switch the navigator on or off Press and hold on or off. until the navigator is switched Switch the navigator to sleep mode To switch navigator to sleep mode, press and hold . A dialog box prompts, select [SLEEP] within 5 seconds. • Press to switch on the navigator again. Use the bracket You can use the bracket and the holder to fix the navigator in a car.
4 Navigation Choose a destination You can set your destinations by one of following ways: Access navigation mode 1 Press and hold navigator. 2 Tap [Navigation] to access navigation mode. »» The navigation main menu is displayed in a few seconds. • to switch on the To quit the navigation mode, tap , then choose [Yes] to confirm. Home With this menu, you can set your home address. 1 2 Tap [Home]. 3 Tap [Navigate to] to start navigation. To remove your home address 1 2 Tap [Home].
4 Tap [Navigate to] to start navigation. 2 Type zip code on the keyboard, then select the zip code from the list. Set an address as destination 1 2 Tap [Address]. 3 Choose the city. Type the first letters of the city name on the keyboard, the names of the city are displayed with a list. Tap the city name in the list. • Search by Point of Interest(POI) 1 2 On the street search screen, tap [POI]. Choose the street.
3 Tap [Navigate to] to to start the navigation guidance. Find nearby You can search for a POI that is near to the place where you are. 1 2 Tap [Find nearby]. In the displayed list, choose a POI category in which you are interested. 2 3 Tap the POI you want to reach or select it from the list by typing the first letter of its name. Enter latitude and longitude using the keyboard. 3 Tap 4 Tap [Navigate to] to start navigation. Start navigation to confirm.
During navigation After you select the destination, tap [Navigate to] the start guidance and the navigation screen appears. M L K A C H D A50 F G • • • • • • • • • • • • E J A:Rerouting button : calculates an alternative route. You will return on the navigation screen after 10 seconds if you make no modification. B: Save the current position as POI. C: Mute or unmute. D: Change to map mode. E: Name of the current street. F: Estimated time left to destination. Tap to switch to arrival time.
• • • • • • [View&Sound]: Refer to chapter 4 'Navigation' - 'Settings'. [Route profile] : Refer to chapter 4 'Navigation' - 'Settings'. [Stop navigation]: Tap to stop navigation. [Alarm]: Refer to chapter 4 'Navigation' 'Settings'. [Vehicle's profile]: Refer to chapter 4 'Navigation' - 'Settings'. [Go to]: Go to [Destination] destination menu. Find nearby View & Sound • Once the address is set, you can choose a Point of Interest (POI_ in its vicinity. 1 2 3 4 Tap [Find nearby].
Route profile Tap one of the options to set the route profile. • [Fastest/Shortest] Choose between a route optimized for time or for distance. • [Tolls/No tolls] Choose whether to include toll roads or not. • [Motorway/No Motorway] Choose whether to include highways or not. • [Ferry/No Ferry] Choose whether to include a ferry line or not.
last resort in your route search. If on the other hand, the value is set at 150% for a category, the roads in this category will be given preference. Plan a route • • • • • • [Speed limit]: Set the maximum speed of your vehicle. [Profile]: Select a speed profile to be used by the route calculator. There are 3 default profiles and they can be modified. [Main roads] (red ones on the map) These are part of the network of the main roads connecting the large cities.
Map Mode D E D I G H C B J A F Map displays your current position on the map if navigation mode is not activated. If navigation is in progress, you can switch to map mode by tapping button J. • A: Go back to top menu. • B: Display the whole map. • C: Mute or restore sound. • D: Zoom in or zoom out the map. • E: The current navigation route (blue) • F: Route sheet : lists maneuvers (turns) for the calculated route. • G: Save the position under the central cursor as POI.
5 Use Bluetooth devices »» After connection successfully, tap the following screen appears. , With this navigator, you can also make a call through Bluetooth. Tap to enter Bluetooth menu. (For PNS410BT and PNS510BT only) Connect a device Tip Note •• Philips does not guarantee the compatibility with all Bluetooth devices. •• Before pairing a device with this system, read its user manual for Bluetooth compatibility.
»» The following screen appears, tap the number using the keyboard. Transfer a call to mobile phone By default, the voice comes from the loudspeakers during a call. 2 Tap to send the call. • To end a call, tap . 1 Tap . »» The loudspeakers are muted, and the voice comes from your mobile phone only. 2 Take up your mobile phone for the conversation. Call a number from your phonebook 1 Tap the [Phonebook], the navigator synchronizes the phone book with your mobile phone automatically.
6 Adjust settings Settings Description [Backlight] Set the screen brightness and the backlight time. Adjust the volume and screen tap sound. Set the OSD(on-screen display) languages. View the GPS information. Set date and time. Follow the on-screen instructions to calibrate the touch screen. View the navigation path. View the built-in battery power status. Restore to default settings. View the system information.
7 Product information Note •• Product information is subject to change without prior notice. Speaker Working temperature Temperature for storage and transportation Atmospheric pressure Dimensions of navigator (W x H x D) Dimensions of holder (W x H x D) Weight (main unit) Weight (holder) Rechargeable lithium battery, 3.7V 1.5W @ 8 -10 °C - 55 °C -20 °C - 70 °C 86 Kpa - 106 Kpa 117.5 x 77.4 x 11.8 mm (PNS400/PNS410BT) 133.9 x 84.4 x 11.5 mm (PNS500/PNS510BT) 80.0 x 110.0 x 130.0 mm 0.
8 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the product is nearby and the model number and serial number are available. No power •• The built-in battery need to recharge.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. PNS400/410BT/500/510BT_12_UM_V1.0 Downloaded from www.Manualslib.
