User Manual
– 10 –
Tone or pulse dialling
Your phone can dial in two different ways. Older telephone systems usually work with pulse dialling whilst modern,
digital systems use tone dialling.
You can change the dialling mode of your fax machine. If you do not know which method your line uses, contact your
telephone company.
1
4
7
2
5
8
0
3
6
9
#
∗
OK
FUNCTION
Select function 15 by pressing the FUNCTION key and then enter
number 15.
15 dial mode
OK
FUNCTION
Press the OK key.
DIAL MODE: TONE
Press the CURSOR LEFT or CURSOR RIGHT key.
DIAL MODE: PULSE
OK
FUNCTION
Press the OK key.
PABX: NO
OK
FUNCTION
Press the OK key again if you are operating your fax machine on a
regular PTT line (for connection to a private branch exchange see
chapter 2 Installation/Connecting to a private branch exchange).
15-MAY-99 12:30
Sometimes it is necessary to send tone dial signals to make use of certain services.
If your telephone system works on pulse dialling, you can still send tone signals by pressing the
∗
key or the
#
key. All numbers are then transmitted in the tone dialling method. As soon as you
replace the handset on the fax machine, your fax machine will switch back to pulse dialling.
If you have a digital telephone connection you should set your fax machine to tone dialling because
this setting is the fastest dialling mode.
If you cannot establish the desired telephone/fax connection to the called party, select a
different dialling mode.
Replacing the ink film
The ink film supplied with your fax machine has a protective strip that must be removed before you
load it.
You cannot receive or copy documents unless an ink film is loaded in the fax machine.
CHECK
DISPLAY
If the ink film is finished or if there is no ink film in the fax machine,
the CHECK DISPLAY light flashes, and the following message
appears:
refill inkfilm
Before loading a new ink film you must remove the paper from the paper feed
mechanism. Also follow the instructions on your ink film packaging!
To obtain optimum quality, please use only ink films as specified on your original
roll. For safety reasons, do not use any other brands because they can damage
your fax machine.
Open the machine by carefully lifting the operation panel at the recess in the
middle. If you hear a slight click, the panel has latched into place.