User Manual

– 15 –
INSTALLATION
Connecting to a private branch exchange
(several PTT lines)
P
A
B
X
PTT
Connect the fax machine to an extension line of the
private branch exchange (PABX). In order to operate your
fax machine on an extension, you need to enter the
appropriate settings in function 15.
1
4
7
2
5
8
0
3
6
9
#
∗
OK
FUNCTION
Select function 15 by pressing the FUNCTION key and then
choosing number 15.
15 dial mode
OK
FUNCTION
Press the OK key.
DIAL MODE: PULSE
OK
FUNCTION
Press the OK key.
PABX: NO
Press the CURSOR LEFT or CURSOR RIGHT key in order to switch
to operation on a PABX extension.
PABX: yes
OK
FUNCTION
Press the OK key.
OUTSIDE LINE: 0
1
4
7
2
5
8
0
3
6
9
#
∗
R
Now enter the key that has to be pressed to obtain an outside line
(outside line access code). This is either
0
, the R key or another
number.
OUTSIDE LINE: R
OK
FUNCTION
Press the OK key.
CHECK: YES
OK
FUNCTION
Press OK. Your machine will then check that the outside line can be
obtained.
CHECKING...
... if the check is successful, the following message will appear
briefly in the display:
CHECK OK
... if the check is unsuccessful, the following message will appear
briefly in the display:
CHECK NOT OK
You will be asked to repeat the entry. Change either the dial mode
or check the key for obtaining an outside line.
However, if you have chosen the correct dial mode as well as the
correct key and on the display still appears the message
CHECK NOT OK, delete the key for obtaining the outside line by
pressing the CURSOR LEFT key (
).
DIAL MODE: PULSE