User Manual

– 37 –

TROUBLE-

SHOOTING

Poor output quality when copying or sending fax messages

Clean the scanner glass, scanner roller, document feed roller and facing rubber lips

Open the operation panel by raising it at the recess in the

middle. If you hear a slight click, the panel is latched into

place.

Lightly wipe the scanner glass (B) and rubber lip (D) with a

cloth. Carefully turn the document feed roller (A) by hand

and wipe it gently with the cloth.

FINE/PHOTO

Hold down the FINE/PHOTO key on the operation panel: the

scanner roller (C) will begin to turn. You can then clean the scanner

roller evenly by lightly rubbing the cloth over it.

clean roller

Poor output quality of received fax messages

Clean printer roller

If the paper feed mechanism contains paper please remove

it.

1. Open the operation panel as described above.

2. Then open the ink film cover by pressing both blue

release levers back at the same time with both hands and

then folding back the ink film cover.

Using a cloth as described above, wipe the grey printer

roller (E). To clean the entire roller turn the roller by hand.

When cleaning is complete, close the ink film cover and

the operation panel.

Do not use the fax cleaners available on the market which are drawn through the

machine automatically. By doing so you can damage your fax machine!