User manual

Digital TV Playback 28
First Playback
Navigation Keys
All the keys shown are buttons on the remote
control.
When the DVB-T function is first started, the automatic
channel search must be started.
1 Switch the device on using the on/of
f switch on the
side.
2 Af
ter the initial screen the main menu appears.
3 Connect the aerial (see also Connecting the Aerial,
page 27).
4 Use the navigation keys to select Digital T
V.
5 Confirm with à.
6 The sub menu appears.
Set Area
7 Use the navigation keys to select Utilities/Setup.
8 Confirm with à.
9 Use the navigation keys to select Area set.
10 Confirm with
à.
11 Use the navigation keys to select your area.
12 Confir
m with à.
13 Press ¿ to end the sub me
nu and return to the
overview.
Scan Channels
14 Use the navigation keys to select Scan Channels.
15 Confirm with à.
16 Use the navigation keys to select OK.
17 Confirm with à.
18 Use the navigation keys to select Auto.
19 Confirm wi
th à.
Television
20 Use the navigation keys to select Video Broadcast.
21 Confirm with à.
22 Change the channel using z/{.
Displaying Channel Information
When changing channel, channel informa-
tion is displayed on the bottom projection
edge. The information bar is hidden
after 5
seconds.
23 Press u to en
d playback and return to the main
menu.
During playback you can adjust the volume using /
on the remote control. Press  or
 repeatedly to
shut off the volume completely.
Notice
Notice