operation manual

1 Attach the extension strap to the Velcro strip on one end of the lower
back strip.
2 Then wrap the extended lower back strip around your body.
3 Fasten the lower back strap with the Velcro strip at a width that feels
comfortable.
Positioning the upper back strap
1 To put the BlueTouch Pain Relief Patch in the upper back strap,
follow the same procedure as described in steps 1 and 2 in section
‘Positioning the lower back strap’ above.
2 Remove clothing from the area to be treated.
Note: Make sure the skin in the area to be treated is clean, entirely dry and
free from creams, lotions and other cosmetics.
3 Put on the upper back strap like a backpack. First, put one arm
through the shoulder sling on one side. Then do the same on the
other side.
Note: Make sure the BlueTouch Pain Relief Patch in the strap is located on the
area to be treated and the LED area is in contact with the skin.
4 Tighten the shoulder slings by pulling the elastic straps.
ENGLISH 13